ACDC 85250 Watts AHM Series xppower.com • IT & Medical Approvals • Energy Efficiency Level V, CEC2008 & EISA 2007 • <0.5 W No Load Input Power • Class I and Class II Models (Except AHM250) • Very High Efficiency • IP22 Environmental Rating • 3 Year Warranty Specification Input General • 80-264 VAC (see derating curve) • 47-63 Hz • 85 W: 0.8 A at 115 VAC, 0.4 A 100 W: 1.0 A at 115 VAC, 0.5 A 150 W: 1.5 A at 115 VAC, 0.75 A 180 W: 1.7 A at 115 VAC, 0.9 A 250 W: 2.3 A at 115 VAC, 0.9 A at 230 VAC Inrush Current • 70 A typical, 120 A max at 230 VAC, cold start at 25 °C Power Factor • >0.9 at 115 VAC, 60 Hz at 250 VAC Earth Leakage Current • 85 W: 70 µA typical, 180 µA max 100 W: 70 µA typical, 180 µA max 150 W: 80 µA typical, 200 µA max 180 W: 80 µA typical, 200 µA max 250 W: 80 µA typical, 200 µA max at 264 VAC/60 Hz Input Protection • 85 W: Internal T2.5 A/250 V 100 W: Internal T2.5 A/250 V 150 W: Internal T4.0 A/250 V 180 W: Internal T4.0 A/250 V 250 W: Internal T6.3 A/250 V fuse in line and neutral No Load Input Power • <0.5 W Input Voltage Input Frequency Input Current Switching Frequency Power Density MTBF • 92% typical • Level V • 4000 VAC In to Out, 2 x MOPP 1500 VAC In to Earth, 1 x MOPP 500 VAC Out to Earth, 1 x MOPP • 45-200 KHz variable • 4.4-5.7 W/in3 • 153 kHrs typical to MIL-HDBK-217F at 25 °C, GB Environmental Operating Temperature • 0 °C to +60 °C, derate linearly from 100% power at +40 °C to 60% power at +60 °C Cooling • Convection-cooled Operating Humidity • 5-95% RH, non-condensing Storage Temperature • -40 °C to +85 °C Operating Altitude • 3000 m Shock • 3 x 30 g/11 ms shocks in both +ve & -ve directions along the 3 orthogonal axis, total 18 shocks. Vibration • Three axis 5-500 Hz at 2 g x 10 sweeps EMC & Safety Output See tables Not user-adjustable No minimum load required 100-300 ms typical, model dependant(1) 20 ms typical ±1.5% maximum ±3.0% maximum 5% max. deviation, recovery to within 1% in 500 µs for a 25% load change Ripple & Noise • Typically less than 1%, 1.5% max pk-pk(2) Overvoltage Protection • 125% typical, Recycle input to reset Overtemperature • Unit shuts down, auto recovery Protection Overload Protection • 115-175%, auto recovery Short Circuit Protection • Trip and restart (hiccup mode) Temperature • 0.05 %/°C Coefficient Output Voltage Output Voltage Trim Minimum Load Start Up Delay Hold Up Time Line Regulation Load Regulation Transient Response Efficiency Energy Efficiency Isolation • • • • • • • • Emissions Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Magnetic Field Dips & Interruptions Safety Approvals Notes • EN55011/22, class B conducted EN55011/22, class B radiated • EN61000-3-2, class A • EN61000-3-3 • EN61000-4-2, level 3, Perf Criteria A • EN61000-4-3, level 3, Perf Criteria A • EN61000-4-4, level 3, Perf Criteria A • EN61000-4-5, installation class 3, Perf Criteria A • EN61000-4-6, level 3, Perf Criteria A • EN61000-4-8, level 3, Perf Criteria A • EN61000-4-11, EN60601-1-2 • EN60601-1, ANSI/AAMI ES60601-1, CSA22.2 No. 60601-1 per cUL, Including Risk Management, EN60950, UL60950. Denan (PSE) certification 1. See longform datasheet for further information. 2. Measured at the end of the output cable with 10 µF electrolytic and 0.1 µF ceramic capacitor. Output Power Output Voltage Output Current 85 W 12.0 VDC 7.08 A Model Number(1) AHM85PS12 85 W 15.0 VDC 5.67 A AHM85PS15 85 W 19.0 VDC 4.47 A AHM85PS19 85 W 24.0 VDC 3.54 A AHM85PS24 85 W 12.0 VDC 7.08 A AHM85PS12C2 85 W 15.0 VDC 5.67 A AHM85PS15C2 85 W 19.0 VDC 4.47 A AHM85PS19C2 85 W 24.0 VDC 3.54 A AHM85PS24C2 Notes 1. Models with suffix ‘C2’ have a Class II equipment protection classification. 2. For IEC320-C8 input connector with Class II models, add suffix ‘-8’ to the model number, e.g. AHM85PS24C2-8. 3. For optional input connector retention clip, add suffix ‘-A’ to the model number e.g. AHM85PS24C2-A. 4. Alternate case colours available for OEM quantities, contact sales for information. Mechanical Details 5.9 (150.0) 36.4 (900.0) 0.79 (Ø20) 2.52 (64.0) 5.12 (130.0) 1.4 (36.0) IEC320-C14 1.45 (37.0) 3.02 (76.9) 1.57 (40.0) 1.55 (39.4) 5.11 (130.0) Shell Optional Input Connector Retention (-A) Standard (Class I) C2 Models (Class II) C2-8 Models (Class II) 1.40 (35.7) 2 1 4 3 Output Connector equivalent to KPPX-4P (Non Locking) IEC 320-C14 IEC 320-C18 IEC 320-C8 Pin 1 Pin 2 Pin 3 Pin 4 Outer Shell Output + Output + Return Return GND* Outer Shell C2 Models Floating * Functional earth. Notes 1. Tolerance is 0.02 (0.5) maximum, except output cable length. 2. Weight 0.9 lbs (400 g). 3. Dimensions shown in inches (mm). 4. Alternate case colours available for OEM quantities, contact sales for information ACDC AHM85 Models and Ratings ACDC AHM100 Models and Ratings Output Power Output Voltage Output Current 100 W 12.0 VDC 8.33 A Model Number(1) AHM100PS12 100 W 15.0 VDC 6.67 A AHM100PS15 100 W 19.0 VDC 5.26 A AHM100PS19 100 W 24.0 VDC 4.16 A AHM100PS24 100 W 48.0 VDC 2.08 A AHM100PS48 100 W 12.0 VDC 8.33 A AHM100PS12C2 100 W 15.0 VDC 6.67 A AHM100PS15C2 100 W 19.0 VDC 5.26 A AHM100PS19C2 100 W 24.0 VDC 4.16 A AHM100PS24C2 100 W 48.0 VDC 2.08 A AHM100PS48C2 Notes 1. Models with suffix ‘C2’ have a class II equipment protection classification. 3. For optional input connector retention clip, add suffix ‘-A’ to the model number 2. For IEC320-C8 input connector with class II models, add suffix ‘-8’ to the model e.g. AHM100PS24C2-A. number, e.g. AHM100PS24C2-8. 4. Alternate case colours available for OEM quantities, contact sales for information. Mechanical Details 6.29 (160.0) 36.4 (900.0) 0.2 (5.0) 0.79 (Ø20) 2.52 (64.0) 5.12 (130.0) 1.4 (36.0) 1.45 (37.0) 3.02 (76.9) 1.57 (40.0) 1.55 (39.4) 5.11 (130.0) Shell Optional Input Connector Retention (-A) Standard (Class I) C2 Models (Class II) C2-8 Models (Class II) 1.40 (35.7) 2 1 4 3 Output Connector equivalent to KPPX-4P (Non Locking) IEC 320-C14 IEC 320-C18 IEC 320-C8 Pin 1 Pin 2 Pin 3 Pin 4 Outer Shell Output + Output + Return Return GND* Outer Shell C2 Models Floating * Functional earth. Notes 1. Tolerance is 0.02 (0.5) maximum, except output cable length. 2. Weight 1.1 lbs (500 g). 3. Dimensions shown in inches (mm). Output Power Output Voltage Output Current Model Number(1) 150 W 12.0 VDC 12.50 A AHM150PS12 150 W 15.0 VDC 10.00 A AHM150PS15 150 W 19.0 VDC 7.89 A AHM150PS19 150 W 24.0 VDC 6.25 A AHM150PS24 150 W 48.0 VDC 3.13 A AHM150PS48 150 W 12.0 VDC 12.50 A AHM150PS12C2 150 W 15.0 VDC 10.00 A AHM150PS15C2 150 W 19.0 VDC 7.89 A AHM150PS19C2 150 W 24.0 VDC 6.25 A AHM150PS24C2 150 W 48.0 VDC 3.13 A AHM150PS48C2 Notes 1. For optional input connector retention clip, add suffix ‘-A’ to the model number e.g. AHM150PS24-A. Models with suffix ‘C2’ have a class II equipment protection classification. For IEC320-C8 input connector with class II models, add suffix ‘-8’ to the model number, e.g. AHM150PS24C2-8. 2. Alternate case colours available for OEM quantities, contact sales for information. Mechanical Details Dimensions shown in inches (mm). 7.8 (200.0) 36.4 (900.0) 0.19 (4.9) 0.79 (Ø20) 3.15 (80.0) 1.4 (36.0) 5.12 (130.0) IEC320-C14 1.45 (37.0) 3.94 (100.3) 2.02 (51.5) 1.58 (40.30) 6.8 (173.0) Shell Optional Input Connector Retention (-A) Standard (Class I) C2 Models (Class II) C2-8 Models (Class II) 2 1 4 3 1.40 (35.7) Output Connector equivalent to KPPX-4P (Non Locking) IEC 320-C14 IEC 320-C18 IEC 320-C8 Pin 1 Pin 2 Pin 3 Pin 4 Outer Shell Output + Output + Return Return GND* Outer Shell C2 Models Floating * Functional earth. Notes 1. Tolerance is 0.02 (0.5) maximum, except output cable length. 2. Weight 1.3 lbs (600 g). ACDC AHM150 Models and Ratings ACDC AHM180 Models and Ratings Output Power Output Voltage Output Current 165 W 12.0 VDC 13.50 A Model Number AHM180PS12 180 W 15.0 VDC 12.00 A AHM180PS15 180 W 19.0 VDC 9.47 A AHM180PS19 180 W 24.0 VDC 7.50 A AHM180PS24 180 W 48.0 VDC 3.75 A AHM180PS48 165 W 12.0 VDC 13.50 A AHM180PS12C2 180 W 15.0 VDC 12.00 A AHM180PS15C2 180 W 19.0 VDC 9.47 A AHM180PS19C2 180 W 24.0 VDC 7.50 A AHM180PS24C2 180 W 48.0 VDC 3.75 A AHM180PS48C2 Notes 1. For optional input connector retention clip, add suffix ‘-A’ to the model number e.g. AHM180PS24-A. Models with suffix ‘C2’ have a class II equipment protection classification. For IEC320-C8 input connector with class II models, add suffix ‘-8’ to the model number, e.g. AHM180PS24C2-8. 2. Alternate case colours available for OEM quantities, contact sales for information. Mechanical Details Dimensions shown in inches (mm). 7.87 (200.0) 0.193 (4.9) 35.43 (900.0) 0.79 (Ø20.0) 3.15 (80.0) 1.41 (36.0) 5.12 (130.0) 1.61 (41.0) 3.94 (100.3) 2.02 (51.5) 1.58 (40.3) 6.81 (173.0) Shell Optional Input Connector Retention (-A) Standard (Class I) IEC 320-C14 C2 Models (Class II) IEC 320-C18 C2-8 Models (Class II) 2 4 1.40 (35.7) Output Connector equivalent to KPPX-4P (Non Locking) IEC 320-C8 Pin 1 Pin 2 Pin 3 Pin 4 Outer Shell Output + Output + Return Return GND* Outer Shell C2 Models Floating * Functional earth. Notes 1. Dimensions shown in inches (mm). Tolerance is 0.02 (0.5) maximum, except output cable length. 1 3 2. Weight 1.4 lbs (620 g) Output Power Output Voltage Output Current Model Number(2) 210 W 12.0 VDC 17.50 A AHM250PS12T 220 W 15.0 VDC 14.66 A AHM250PS15T 240 W 19.0 VDC 12.63 A AHM250PS19T 250 W 24.0 VDC 10.41 A AHM250PS24T 250 W 48.0 VDC 5.21 A AHM250PS48T Notes 1. For optional input connector retention clip, add suffix ‘-A’ to the model number e.g. AHM250PS24T-A. 2. For 6 pin DIN connector, remove ‘T’ from the end of the model number e.g. AHM250PS24 (DIN connector for medical applications only). Mechanical Details Dimensions shown in inches (mm). Standard Molex 6 pin Connector 8.8 (223.0) 8.58 (218.0) 0.2 (5.0) 35.43 (900.0) 0.79 (Ø 20.0) 3.484 (88.50) 1.417 (36.0) Optional 6 pin DIN connector shown (for medical applications only) IEC 320-C14 0.79 (Ø 20.0) 1.457 (37.0) 4.134 (105.0) 1.417 (36.0) 0.063 (1.60) 7.41 (188.40) 2.37 (60.20) 1.97 (50.20) OUTPUT CONNECTOR 5.12 (130.20) 5 4 Optional Input Connector Retention (-A) 6 1.40 (35.7) 3 1 2 Pin No. Molex Part No.: 50-36-1672 DIN Part No.: DIN45322 Pin 1 Return Output + Pin 2 Return Return Pin 3 Return Return Pin 4 Output + Return Pin 5 Output + Output + Pin 6 Ouput + Ouput + Outer Shell Shell GND* * Functional earth. IEC 320-C14 1 2 3 6 Notes 5 1. Dimensions shown in inches (mm). Tolerance is 0.02 (0.5) maximum, except output cable length. 2. Weight 2.2 lbs (1000 g). 4 Derating Curve 100 Output Power (%) 90 80 70 AHM85,100,150 & 180 Models 60 AHM250 Models 50 40 80 85 90 100 110 240 250 264 28-Oct-13 ACDC AHM250 Models and Ratings