Axial Leads/Mini-Resistor GENERAL DESCRIPTION D AVX HR Series Axial Leaded Resistor Case Material: Plastic Shell Lead Material: 60Sn/40Pb Solder Plated C A B Dimensions: Millimeters (Inches) HOW TO ORDER HR01 A B C D 104 J AVX Style Resistance Tolerance HR01 First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. Example: 2R2 = 2.2Ω 100 = 10Ω 104 = 100,000Ω 106 = 10,000,000Ω J = ±5% K = ±10% 1.91 0.91 0.91 0.20 (0.075) (0.036) (0.036) (0.008) Tolerance ±.005 ±.005 ±.005 ±.001 MARKING (EXAMPLE) 47 x 1003 = 47000Ω = 47kΩ 0 = 0Ω (Jumper) 100 = 10Ω 102 = 1kΩ 105 = 1MΩ Three Digit Identification Code Note: > 225 is K tolerance, ≤ 225 is J tolerance Temperature Coefficient of Resistance HR01 J (±5%) Tolerance Resistance Range 10Ω 冮 1MΩ TCR (ppm/ºC) ±250 1MΩ 冮 2.2MΩ -500 冮 +300 K (±10%) 10Ω 冮 1MΩ 2.2Ω 冮 10Ω -100 冮 +600 ±250 1MΩ 冮 10MΩ -500 冮 +300 473 Resistance Ranges HR01 Tolerance Value Range J (±5%) 10Ω to 2.2MΩ K (±10%) 2.2Ω to 10MΩ Resistance Ratings for HR01 Power Voltage Working 0.063 (1/16) w 50V max. -55ºC to +70ºC no derating +70ºC to +125ºC with derating 43 Axial Leads/Packaging TAPE AND REEL CLASS I / RS-296 D1 5mm ± 0.5mm (.200" ± 0.020") 52.4mm ± 1.5mm (2.063" ± 0.059") 6.35mm ± 0.4mm (0.250" ± 0.016") 1.4mm (0.055" MAX.) 1.2mm (0.047" MAX.) 1.6mm (0.063" MAX.) 356mm (14.00") 76mm (3.000") 25.4mm (1.000") 84mm (3.300") 70mm (2.750") A. B*. C. D1-D2. E. F. G. H. I. J. K. Optional Design F C E A B Leader Tape: 300mm min. (12") Splicing: Tape Only Missing Parts: 0.25% of component count max.No consecutive missing parts REEL QUANTITIES (MAX.) ‡ K H D2 SA05 SA10 SA11 SA20 SA30 SA40 J 7,500 7,500 5,000 5,000 5,000 5,000 pcs. pcs. pcs. pcs. pcs. pcs. MA10 MA20 MA30 MA40 MA50 MA60 5,000 pcs. 5,000 pcs. 3,000 pcs. 3,000 pcs. 950 pcs. 650 pcs. ‡ 1000 pc. reels available for distribution pack only in ±1% and ±2% tolerance. * I G Standard Tape Spacing Shown. Also available in 26.0mm + 1.5mm, – 0mm, (1.023 in. + .059 in. -0 in. ) for SpinGuards only. EIA Class I, II and III tape spacings are available for molded axials. Tape spacing for Class II is 63.5mm ± 1.5mm (2.50 in ± .059 in), and for Class III 73mm ± 1.5mm (2.87 in ± .059 in) ADDITIONAL PACKAGING AVAILABLE AMMO PACK Tape Spacing SA05, SA10 SA20 SA11 SA30 52.4mm ± 1.5mm (2.062" ± .059") 4,000 pcs. 2000 26.0mm + 1.5mm - 0mm (1.023" + .059" - 0") 4,000 pcs.* 2000 BOX SIZES (Nominal) SA40 L W H 2,000 pcs. 255mm (10.039") 73mm (2.874") 93mm (3.661") 2,000 pcs.* 255mm (10.039") 48mm (1.889") 113mm (4.448") *SpinGuard only BULK PACK (MOLDED AXIALS ONLY) 48 MA10 MA20 MA30 MA40 100 pcs. (bag) MA50 MA60 50 pcs. (bag)