IDT IDT74FCT163951CPF 3.3v cmos 16-bit registered transceiver Datasheet

3.3V CMOS
16-BIT REGISTERED
TRANSCEIVER
IDT74FCT163952A/B/C
Integrated Device Technology, Inc.
FEATURES:
DESCRIPTION:
• 0.5 MICRON CMOS Technology
• Typical tSK(o) (Output Skew) < 250ps
• ESD > 2000V per MIL-STD-883, Method 3015;
> 200V using machine model (C = 200pF, R = 0)
• Packages include 25 mil pitch SSOP, 19.6 mil pitch
TSSOP and 15.7 mil pitch TVSOP
• Extended commercial range of -40°C to +85°C
• VCC = 3.3V ±0.3V, Normal Range or
VCC = 2.7 to 3.6V, Extended Range
• CMOS power levels (0.4µW typ. static)
• Rail-to-Rail output swing for increased noise margin
• Low Ground Bounce (0.3V typ.)
• Inputs (except I/O) can be driven by 3.3V or 5V
components
The FCT163952A/B/C 16-bit registered transceivers are
built using advanced dual metal CMOS technology. These
high-speed, low-power devices are organized as two independent 8-bit D-type registered transceivers with separate input
and output control for independent control of data flow in either
direction. For example, the A-to-B Enable (xCEAB) must be
LOW to enter data from the A port. xCLKAB controls the
clocking function. When xCLKAB toggles from LOW-to-HIGH,
the data present on the A port will be clocked into the register.
xOEAB performs the output enable function on the B port.
Data flow from the B port to A port is similar but requires using
xCEBA, xCLKBA, and xOEBA inputs. Full 16-bit operation is
achieved by tying the control pins of the independent transceivers together.
The FCT163952A/B/C have series current limiting resistors. These offer low ground bounce, minimal undershoot, and
controlled output fall times–reducing the need for external
series terminating resistors.
FUNCTIONAL BLOCK DIAGRAM
1CEBA
2CEBA
1CLKBA
2CLKBA
1OEAB
2OEAB
1CEAB
2CEAB
1CLKAB
2CLKAB
1OEBA
2OEBA
C
CE
D
1A1
1B1
C
CE
D
TO 7 OTHER CHANNELS
2A1
C
CE
D
2B1
C
CE
D
3096 drw 01
TO 7 OTHER CHANNELS
3096 drw 02
The IDT Logo is a registered trademark of Integrated Device Technology, Inc.
COMMERCIAL TEMPERATURE RANGE
1996 Integrated Device Technology, Inc.
AUGUST 1996
8.10
DSC-3096/4
1
IDT74FCT163952/A/C
3.3V CMOS 16-BIT REGISTERED TRANSCEIVER
COMMERCIAL TEMPERATURE RANGE
PIN CONFIGURATIONS
PIN DESCRIPTION
Pin Names
xOEAB
1OEAB
1
56
1OEBA
1CLKAB
2
55
1CLKBA
1CEAB
3
54
1CEBA
GND
4
53
GND
1A1
5
52
1 B1
1A2
6
51
1 B2
VCC
7
50
VCC
1A3
8
49
1 B3
1A4
9
48
1 B4
1A5
10
47
1 B5
GND
11
46
GND
1A6
12
45
1 B6
1A7
13
44
1 B7
1A8
14
1 B8
2A1
15
SO56-1 43
SO56-2
SO56-3 42
2A2
16
41
2 B2
17
40
2 B3
GND
18
39
GND
2A4
19
38
2 B4
2A5
20
37
2 B5
2A6
21
36
2 B6
VCC
22
35
VCC
2A7
23
34
2 B7
2A8
24
33
2 B8
GND
25
32
GND
2CEAB
26
31
2CEBA
2CLKAB
27
30
2CLKBA
2OEAB
28
29
2OEBA
B-to-A Output Enable Input (Active LOW)
xCEAB
A-to-B Clock Enable Input (Active LOW)
xCEBA
B-to-A Clock Enable Input (Active LOW)
xCLKAB
A-to-B Clock Input
xCLKBA
B-to-A Clock Input
xAx
A-to-B Data Inputs or B-to-A 3-State Outputs
xBx
B-to-A Data Inputs or A-to-B 3-State Outputs
ABSOLUTE MAXIMUM RATINGS(1)
Symbol
VTERM(2)
TSTG
Description
Terminal Voltage with
Respect to GND
Terminal Voltage with
Respect to GND
Terminal Voltage with
Respect to GND
Storage Temperature
I OUT
DC Output Current
VTERM(3)
VTERM(4)
Max.
–0.5 to +4.6
Unit
V
–0.5 to +7.0
V
–0.5 to
VCC + 0.5
–65 to +150
V
°C
–60 to +60
mA
3096 lnk 03
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification is
not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
2. Vcc terminals.
3. Input terminals.
4. Output and I/O terminals.
FUNCTION TABLE(1,3)
Inputs
3096 drw 03
CAPACITANCE (TA = +25°C, f = 1.0MHz)
Symbol
Parameter(1)
CIN
Input
Capacitance
CI/O
I/O
Capacitance
A-to-B Output Enable Input (Active LOW)
3096 tbl 01
2 B1
2A3
SSOP/
TSSOP/TVSOP
TOP VIEW
xOEBA
Description
Conditions
VIN = 0V
Typ.
3.5
VOUT = 0V
3.5
Max. Unit
6.0
pF
8.0
NOTE:
1. This parameter is measured at characterization but not tested.
pF
3096 lnk 04
Outputs
xCEAB
xCLKAB
xOEAB
xAx
xBx
H
X
L
X
B(2)
X
L
L
X
B(2)
L
↑
L
L
L
L
↑
L
H
H
X
X
H
X
Z
NOTES:
3096 tbl 02
1. A-to-B data flow is shown: B-to-A data flow is similar but uses, xCEBA,
xCLKBA, and xOEBA.
2. Level of B before the indicated steady-state input conditions were
established.
3. H = HIGH Voltage Level
L = LOW Voltage Level
X = Don't Care
↑ = LOW-to-HIGH Transition
Z = High-impedance
8.10
2
IDT74FCT163952/A/C
3.3V CMOS 16-BIT REGISTERED TRANSCEIVER
COMMERCIAL TEMPERATURE RANGE
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Commercial: TA = –40°C to +85°C, VCC = 2.7V to 3.6V
Symbol
VIH
Test Conditions(1)
Guaranteed Logic HIGH Level
Min.
2.0
Guaranteed Logic LOW Level
VI = 5.5V
Input HIGH Current (I/O pins)
Input LOW Current (Input pins)
Parameter
Input HIGH Level (Input pins)
Typ.(2)
—
Max.
5.5
2.0
—
VCC+0.5
–0.5
—
0.8
V
—
—
±1
µA
VI = VCC
—
—
±1
VI = GND
—
—
±1
Input HIGH Level (I/O pins)
VIL
Input LOW Level
Unit
V
(Input and I/O pins)
II H
II L
Input HIGH Current (Input pins)
VCC = Max.
Input LOW Current (I/O pins)
VI = GND
—
—
±1
—
—
±1
VO = GND
—
—
±1
—
–0.7
–1.2
V
–36
–60
–110
mA
90
200
mA
V
High Impedance Output Current
I OZL
(3-State Output pins)
VIK
Clamp Diode Voltage
VCC = Min., IIN = –18mA
I ODH
Output HIGH Current
VCC = 3.3V, V IN = VIH or VIL, VO = 1.5V(3)
I ODL
Output LOW Current
VCC = 3.3V, V IN = VIH or VIL, VO = 1.5V(3)
50
VOH
Output HIGH Voltage
VOL
Output LOW Voltage
I OS
Short Circuit Current(4)
VH
Input Hysteresis
I CCL
I CCH
I CCZ
Quiescent Power Supply Current
VCC = Max.
VO = V CC
I OZH
µA
VCC = Min.
I OH = –0.1mA
VCC– 0.2
—
—
VIN = VIH or V IL
I OH = –3mA
2.4
3.0
—
VCC = 3.0V
VIN = VIH or V IL
VCC = Min.
I OH = –8mA
2.4 (5)
3.0
—
I OL = 0.1mA
—
—
0.2
VIN = VIH or V IL
I OL = 16mA
—
0.2
0.4
I OL = 24mA
—
0.3
0.55
VCC = 3.0V
I OL = 24mA
VIN = VIH or V IL
VCC = Max., VO = GND(3)
—
0.3
0.50
–60
–135
–240
mA
—
150
—
mV
—
0.1
10
µA
—
VCC = Max.,
VIN = GND or VCC
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at Vcc = 3.3V, +25°C ambient.
3. Not more than one output should be tested at one time. Duration of the test should not exceed one second.
4. This parameter is guaranteed but not tested.
5. VOH = VCC –0.6V at rated current.
8.10
V
3096 lnk 05
3
IDT74FCT163952/A/C
3.3V CMOS 16-BIT REGISTERED TRANSCEIVER
COMMERCIAL TEMPERATURE RANGE
POWER SUPPLY CHARACTERISTICS
Symbol
Parameter
Test Conditions(1)
Min.
Typ.(2)
Max.
Unit
∆ICC
Quiescent Power Supply
VCC = Max.
VIN = VCC –0.6V
—
2.0
100
µA
ICCD
Dynamic Power Supply Current(4)
VCC = Max., Outputs Open
xOEAB or xOEBA = GND
One Input Toggling
50% Duty Cycle
VIN = VCC
VIN = GND
—
60
100
µA/
MHz
IC
Total Power Supply Current(6)
VCC = Max., Outputs Open
fCP = 10MHz (xCLKAB)
50% Duty Cycle
xOEAB = xCEAB = GND
xOEBA = VCC
One Bit Toggling
fi = 5MHz
50% Duty Cycle
VIN = VCC
VIN = GND
—
0.6
1.0
mA
VIN = VCC –0.6V
VIN = GND
—
0.6
1.1
VCC = Max., Outputs Open
fCP= 10MHz (xCLKAB)
50% Duty Cycle
xOEAB = xCEAB = GND
xOEBA = VCC
Sixteen Bits Toggling
fi = 2.5MHz
50% Duty Cycle
VIN = VCC
VIN = GND
—
3.0
5.0(5)
VIN = VCC –0.6V
VIN = GND
—
3.0
5.9(5)
(3)
NOTES:
1. For conditions shown as max. or min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 3.3V, +25°C ambient.
3. Per TTL driven input; all other inputs at VCC or GND.
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.
5. Values for these conditions are examples of the ICC formula. These limits are guaranteed but not tested.
6. IC = IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ∆ICC DHNT + ICCD (fCPNCP/2 + fiNi)
ICC = Quiescent Current (ICCL, ICCH and ICCZ)
∆ICC = Power Supply Current for a TTL High Input
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)
NCP = Number of Clock Inputs at fCP
fi = Input Frequency
Ni = Number of Inputs at fi
8.10
3096 tbl 07
4
IDT74FCT163952/A/C
3.3V CMOS 16-BIT REGISTERED TRANSCEIVER
COMMERCIAL TEMPERATURE RANGE
SWITCHING CHARACTERISTICS OVER OPERATING RANGE(5)
FCT163952A
Symbol
tPLH
tPHL
tPZH
tPZL
tPHZ
tPLZ
tSU
Parameter
Condition(1)
Propagation Delay
CL = 50pF
xCLKAB, xCLKBA to xBx, xAx RL = 500Ω
Output Enable Time
xOEBA, xOEAB to xAx, xBx
Output Disable Time
xOEBA, xOEAB to xAx, xBx
Set-up Time HIGH or LOW
xAx, xBx to xCLKAB, xCLKBA
tH
Hold Time HIGH or LOW
xAx, xBx to xCLKAB, xCLKBA
tSU Set-up Time HIGH or LOW
xCEAB, xCEBA to xCLKAB,
xCLKBA
tH
Hold Time HIGH or LOW
xCEAB, xCEBA to xCLKAB,
xCLKBA
tW
Pulse Width HIGH or LOW
xCLKAB or xCLKBA(4)
tSK(o) Output Skew (3)
Min.(2)
FCT163952B
FCT163952C
Max.
Min.(2)
Max.
Min.(2)
Max.
Unit
2.0
10.0
2.0
7.5
2.0
6.3
ns
1.5
10.5
1.5
8.0
1.5
7.0
ns
1.5
10.0
1.5
7.5
1.5
6.5
ns
2.5
—
2.5
—
2.5
—
ns
2.0
—
1.5
—
1.5
—
ns
3.0
—
3.0
—
3.0
—
ns
2.0
—
2.0
—
2.0
—
ns
3.0
—
3.0
—
3.0
—
ns
—
0.5
—
0.5
—
0.5
ns
NOTES:
3096 tbl 08
1. See test circuits and waveforms.
2. Minimum limits are guaranteed but not tested on Propagation Delays.
3. Skew between any two outputs of the same package switching in the same direction. This parameter is guaranteed by design.
4. This parameter is guaranteed but not tested.
5. Propagation Delays and Enable/Disable times are with VCC = 3.3V ±0.3V, Normal Range. For VCC = 2.7V to 3.6V, Extended Range, all Propagation Delays
and Enable/Disable times should be degraded by 20%.
8.10
5
IDT74FCT163952/A/C
3.3V CMOS 16-BIT REGISTERED TRANSCEIVER
COMMERCIAL TEMPERATURE RANGE
TEST CIRCUITS AND WAVEFORMS
SWITCH POSITION
TEST CIRCUITS FOR ALL OUTPUTS
Test
Open Drain
Disable Low
Enable Low
Disable High
Enable High
All Other tests
6V
←
V
CC
Open
GND
500Ω
V
V
IN
Pulse
Generator
OUT
D.U.T.
50pF
R
T
C
500Ω
L
3096 drw 05
SET-UP, HOLD AND RELEASE TIMES
DATA
INPUT
TIMING
INPUT
ASYNCHRONOUS CONTROL
PRESET
CLEAR
ETC.
SYNCHRONOUS CONTROL
PRESET
CLEAR
CLOCK ENABLE
ETC.
tH
tSU
tREM
tSU
Switch
6V
GND
Open
3096 lnk 09
DEFINITIONS:
CL= Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse
Generator.
PULSE WIDTH
3V
1.5V
0V
3V
1.5V
0V
LOW-HIGH-LOW
PULSE
1.5V
tW
3V
1.5V
0V
HIGH-LOW-HIGH
PULSE
1.5V
3096 drw 07
3V
1.5V
0V
tH
3096 drw 06
PROPAGATION DELAY
ENABLE AND DISABLE TIMES
ENABLE
SAME PHASE
INPUT TRANSITION
tPLH
tPHL
OUTPUT
tPLH
OPPOSITE PHASE
INPUT TRANSITION
tPHL
3V
1.5V
0V
DISABLE
3V
1.5V
CONTROL
INPUT
OUTPUT
NORMALLY SWITCH
6V
LOW
tPZH
3V
1.5V
0V
OUTPUT
NORMALLY
HIGH
3096 drw 08
SWITCH
GND
0V
tPLZ
tPZL
VOH
1.5V
VOL
3V
3V
1.5V
0.3V
VOL
tPHZ
0.3V
VOH
1.5V
0V
0V
3096 drw 09
NOTES:
1. Diagram shown for input Control Enable-LOW and input Control
Disable-HIGH.
2. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2.5ns; tR ≤ 2.5ns.
3. If VCC is below 3V, input voltage swings should be adjusted not to
exceed VCC.
8.10
6
IDT74FCT163952/A/C
3.3V CMOS 16-BIT REGISTERED TRANSCEIVER
COMMERCIAL TEMPERATURE RANGE
ORDERING INFORMATION
IDT
XX
FCT
X
Temp. Range
Drive
XXXX
Device Type
X
Package
PV
PA
PF
Shrink Small Outline Package (SO56-1)
Thin Shrink Small Outline Package (SO56-2)
Thin Very Small Outline Package (SO56-3)
952A
952B
952C
Non-Inverting 16-Bit Registered Transceiver
163
16-Bit 3.3Volt
74
-40°C to +85°C
3096 drw 10
8.10
7
Similar pages