UTC MCR100-8-X-AE3-R Sensitive gate silicon controlled rectifiers reverse blocking thyristor Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MCR100
SCR
SENSITIVE GATE SILICON
CONTROLLED RECTIFIERS
REVERSE BLOCKING
THYRISTORS
„
3
1
SOT-89
SOT-23
1
TO-92
FEATURES
* Sensitive gate allows triggering by micro controllers and other
logic circuits
* Blocking voltage to 600V
* On-state current rating of 0.8A RMS at 80°C
* High surge current capability – 10A
* Minimum and maximum values of IGT, VGT and IH specified for
ease of design
* Immunity to dV/dt – 20V/μsec minimum at 110°C
* Glass-passivated surface for reliability and uniformity
„
1
DESCRIPTION
PNPN devices designed for high volume, line-powered
consumer applications such as relay and lamp drivers, small motor
controls, gate drivers for larger thyristors, and sensing and
detection circuits.
„
2
Lead-free:
MCR100L
Halogen-free:MCR100G
ORDERING INFORMATION
Ordering Number
Normal
Lead Free Plating
MCR100-4-x-AB3-R MCR100L-4-x-AB3-R
MCR100-4-x-AE3-R MCR100L-4-x-AE3-R
MCR100-4-x-T92-B MCR100L-4-x-T92-B
MCR100-4-x-T92-K MCR100L-4-x-T92-K
MCR100-6-x-AB3-R MCR100L-6-x-AB3-R
MCR100-6-x-AE3-R MCR100L-6-x-AE3-R
MCR100-6-x-T92-B MCR100L-6-x-T92-B
MCR100-6-x-T92-K MCR100L-6-x-T92-K
MCR100-8-x-AB3-R MCR100L-8-x-AB3-R
MCR100-8-x-AE3-R MCR100L-8-x-AE3-R
MCR100-8-x-T92-B MCR100L-8-x-T92-B
MCR100-8-x-T92-K MCR100L-8-x-T92-K
Note: Pin assignment: G: Gate K: Cathode
Halogen Free
MCR100G-4-x-AB3-R
MCR100G-4-x-AE3-R
MCR100G-4-x-T92-B
MCR100G-4-x-T92-K
MCR100G-6-x-AB3-R
MCR100G-6-x-AE3-R
MCR100G-6-x-T92-B
MCR100G-6-x-T92-K
MCR100G-8-x-AB3-R
MCR100G-8-x-AE3-R
MCR100G-8-x-T92-B
MCR100G-8-x-T92-K
A: Anode
Package
SOT-89
SOT-23
TO-92
TO-92
SOT-89
SOT-23
TO-92
TO-92
SOT-89
SOT-23
TO-92
TO-92
Pin assignment
1
2
3
G
A
K
G
K
A
K
G
A
K
G
A
G
A
K
G
K
A
K
G
A
K
G
A
G
A
K
G
K
A
K
G
A
K
G
A
Packing
Tape Reel
Tape Reel
Tape Box
Bulk
Tape Reel
Tape Reel
Tape Box
Bulk
Tape Reel
Tape Reel
Tape Box
Bulk
MCR100L-4-x-AB3-R
(1) Packing Type
(1) B: Tape Box, K: Bulk, R: Tape Reel
(2) Package Type
(2) AB3: SOT-89, AE3: SOT-23, T92: TO-92
(3) Rank
(3) x: Refer to CLASSIFICATION OF IGT
(4) Lead Plating
(4) G: Halogen Free, L: Lead Free, Blank: Pb/Sn
www.unisonic.com.tw
Copyright © 2009 Unisonic Technologies Co., Ltd
1 of 6
QW-R301-016.C
MCR100
„
SCR
MARKING FOR SOT-23
MCR100-4
R4
L: Lead Free
G: Halogen Free
MCR100-6
R6
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
L: Lead Free
G: Halogen Free
MCR100-8
R8
L: Lead Free
G: Halogen Free
2 of 6
QW-R301-016.C
UNISONIC TECHNOLOGIES CO., LTD
MCR100
„
SCR
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Peak Repetitive Off-State Voltage(Note 1)
(TJ=-40 ~ 110°С, Sine Wave, 50 ~ 60Hz;
Gate Open)
SYMBOL
RATINGS
200
400
600
0.8
UNIT
V
V
V
A
MCR100-4
VDRM,VRRM
MCR100-6
MCR100-8
On-Sate RMS Current (Tc=80°С) 180°С Condition Angles
IT(RMS)
Peak Non-Repetitive Surge Current
ITSM
10
A
(1/2 cycle, Sine Wave, 60Hz, TJ=25°С)
2
Circuit Fusing Considerations (t=8.3 ms)
It
0.415
A2s
Forward Peak Gate Power (TA=25°С, Pulse Width ≤1.0µs)
PGM
0.1
W
Forward Average Gate Power (TA=25°С, t=8.3ms)
PG(AV)
0.1
W
Peak Gate Current – Forward (TA=25°С, Pulse Width≤1.0μs)
IGM
1
A
Peak Gate Voltage – Reverse (TA=25°С, Pulse Width≤1.0μs)
VGRM
5
V
Operating Junction Temperature Range
TJ
-40 ~ +110
°С
(Rated VRRM and VDRM)
Storage Temperature Range
TSTG
-40 ~ +150
°С
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
THERMAL DATA
PARAMETER
Junction to Ambient
„
SYMBOL
TO-92
SOT-23/SOT-89
θJA
MAX
200
400
UNIT
°С/W
°С/W
ELECTRICAL CHARACTERISTICS (TJ=25°С, unless otherwise stated)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
OFF CHARACTERISTICS
Peak Forward or Reverse Blocking TC=25°С
VD=Rated VDRM and VRRM;
10
μA
IDRM, IRRM
Current
RGK=1kΩ
TC=125°С
100 μA
ON CHARACTERISTICS
Peak Forward On-State Voltage (Note 2)
VTM
ITM=1A Peak @ TA=25°С
1.7
V
Gate Trigger Current (Continuous DC)(Note3)
IGT
VAK=7Vdc, RL=100Ω, TC=25°С
40
200 μA
VAK=7Vdc, initiating
TC=25°С
0.5
5
mA
Holding Current (Note 4)
IH
current=20mA
10
mA
TC=-40°С
TC=25°С
0.6
10
mA
IL
Latch Current
VAK=7V, Ig=200μA
TC=-40°С
15
mA
Gate Trigger Voltage (continuous
TC=25°С
0.62 0.8
V
VGT
VAK=7Vdc, RL=100Ω
dc) (Note 3)
TC=-40°С
1.2
V
DYNAMIC CHARACTERISTICS
VD=Rated VDRM, Exponential
Critical Rate of Rise of Off-State Voltage
dV/dt Waveform, RGK=1000Ω,
20
35
V/μs
TJ=110°С
IPK=20A; Pw=10μsec;
50 A/μs
Critical Rate of Rise of On-State Current
di/dt
diG/dt=1A/μsec, Igt=20mA
Notes: 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate
voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the
anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of
the devices are exceeded.
2. Indicates Pulse Test Width≤1.0ms, duty cycle ≤1%
3. RGK=1000Ω included in measurement.
4. Does not include RGK in measurement
www.unisonic.com.tw
Copyright © 2009 Unisonic Technologies Co., Ltd
3 of 6
QW-R301-016.C
UNISONIC TECHNOLOGIES CO., LTD
MCR100
„
SCR
VOLTAGE CURRENT CHARACTERISTIC OF SCR
PARAMETER
Peak Repetitive Off Stat Forward Voltage
Peak Forward Blocking Current
Peak Repetitive Off State Reverse Voltage
Peak Reverse Blocking Current
Peak On State Voltage
Holding Current
SYMBOL
VDRM
IDRM
VRRM
IRRM
VTM
IH
+Current
Anode+
VTM
On State
IH
IRRM at VRRM
Reverse Blocking
Region (off state)
Reverse Avalanche
Region Anode-
„
+Voltage
IDRM at VDRM
Forward Blocking
Region (off state)
CLASSIFICATION OF IGT
RANK
RANGE
B
48~105μA
C
95~200μA
www.unisonic.com.tw
Copyright © 2009 Unisonic Technologies Co., Ltd
AA
8~16μA
AB
14~21μA
AC
19~25μA
AD
23~52μA
4 of 6
QW-R301-016.C
MCR100
TYPICAL CHARACTERISTICS
Typical Gate Trigger Current vs.
Junction Temperature
Typical Gate Trigger Voltage vs.
Junction Temperature
100
1.0
90
0.9
80
Gate Trigger Voltage (V)
Gate Trigger Current (µA)
„
SCR
70
60
50
40
30
20
0.8
0.7
0.6
0.5
0.4
0.3
10
-40 -25 -10 5 20 35 50 65 80 95 110
Junction Temperature, TJ (℃)
0.2
-40 -25 -10 5 20 35 50 65 80 95 110
Junction Temperature, TJ (℃)
Typical RMS Curent Derating
Typical On-State Characteristics
120
10
110
MAXIMUM@T
J=25℃
100
90
80
180°
70
1
MAXIMUM@TJ=110℃
60
50
40
0
120°
30°
60°
90°
0.1
0.2
0.3
0.5
0.4
RMS On-State Current, IT(RMS) (A)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
0.1
0.5 0.8 1.11.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5
Instantaneous On-State Voltage, VT (V)
5 of 6
QW-R301-016.C
MCR100
SCR
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 6
QW-R301-016.C
Similar pages