BOARDCOM BCM5464 Strataxgs tm integrated multi-layer switch Datasheet

BCM5651
®
StrataXGS™ INTEGRATED MULTI-LAYER SWITCH
SUMMARY OF BENEFITS
FEATURES
•
•
•
•
•
•
•
24 x 10/100 Mbits, 4 x 10/100/1000 Mbps Ethernet ports
• High-density 10/100/1000 Mbps L2 Ethernet switches
• 9.5-Mpps, full-duplex, line-rate performance across all
•
•
•
•
Up to 256 L2 multicast groups and hardware packet replication
9.5 Mpps (line rate) aggregate L2 switching capacity
interfaces
Integrated L2 table (16K) with auto learning/aging
• New service offerings for ISPs
Double 802.1Q (Q in Q) VLAN stacking
• Metro Ethernet-L2 VLAN (Q-in-Q) and MPLS VPN
• Voice Over IP (VOIP)-guaranteed low latency prioritization
• Advanced traffic management-metering, shaping, and
scheduling (SP, RR, WRR, WFQ), down to 64-Kbps flows
• ContentAware classification, tagging, and remapping provides
maximum security and flexibility
• Broadcom switch API compatibility enables software reuse
and faster time-to-market
MPLS tunnel/VC packet labeling for L2 VPN
Scalable Fast/Gigabit Ethernet in a system
Eight Classes of Service (COS) with WRED and WRR, DSCP/
802.1p priority
• 256 spanning trees (802.1s and 802.1w)
• 32 link aggregation trunk groups and mirroring
Flow control (802.3x) and HOL blocking prevention
64 data bit DDR SDRAM with up to 32 MB of buffer memory
ContentAware™ network processing per port
• Line-rate, multi-field packet classification
• Support for 802.1p, TOS/DiffServ, rate limiting, policing, and
priority/VLAN (single or double) tagging and remapping
APPLICATIONS
• High-density multi-layer scalable enterprise 10/100/
1000 Mbps L2 Ethernet switches
• Multi-Tenant Unit (MTU) Metro Ethernet VPN multi-layer
switches
• Service provider Metro Ethernet VPN edge switches
Application Diagram
BCM5651
BCM
BCM
5248
5238
BCM
BCM
5248
5238
2 x 6 port RJ-45
BCM
BCM
5248
5238
2 x2 6x port
RJ-45
6 port
RJ
-45
10/100 Mbps
CPU
FLASH
FLASH
Memory
Memory
FLASH
SDRAM
Memory
Memory
FLASH
SDRAM
Memory
Memory
BCM
BCM
5464
64
54
RJ-45 RJ-45 RJ-45 RJ-45
10/100/1000
OVERVIEW
Block Diagram
CPU I/O
FFP
ARL
Advanced MMU
DDR SDRAM interface for
non-blocking performance
MAC(s)
The BCM5651 network switch is the most advanced multi-layer, singlechip solution for high density 24 x 10/100 Mbps ports and 4 x 10/100/
1000 Mbps Ethernet uplinks.
With an aggregate line rate of 9.5 Mpps, the BCM5651 offers hardware
switching on L2 traffic. Filtering, policing, and priority tagging can be
performed in real time with no impact on forwarding performance.
Supporting the latest Metro Ethernet L2 VPN applications, the
BCM5651 offers double 802.1Q VLAN stacking, also known as Q-inQ. This allows enterprise and service provider networks to breakthrough
the 4K VLAN tag limitation. Further, BCM5651 also provides MPLS
tunnel/VC packet labeling for standards-based IETF L2 VPN via MPLS.
With eight CoS queues via SP, RR, WFQ, and WRR distribution, the
BCM5651 enables full range of service applications such as low latency
VoIP and real-time video, as well as mission critical data.
Optimized for the most demanding network switching requirements, the
BCM5651 integrates a 16K entry auto-learning/aging MAC. Advanced
Ethernet features such as multiple and rapid spanning tree (802.1s and
802.1w), flow control (802.3x), prioritization (802.1p), and 9K jumbo
frame switching are fully integrated. All L2 traffic is switched at line
rate. For load balancing as well as redundancy purposes, link aggregation
is incorporated. Up to 32 trunk groups (eight links per group) can be
assigned for link aggregation (802.3ad).
Providing line-rate packet filtering and classification, the advanced Fast
Filter Processor (FFP) offers ContentAware network processing per port.
The BCM5651 supports TOS/DiffServ, rate limiting, policing, shaping,
metering, scheduling, priority tagging, and remapping down to flows as
small as 64 Kbps, making it ideal for committed bandwidth usage and
firewall applications.
Designed for increasing multicast applications, the BCM5651 switches
all L2 multicast packet sizes at line rate. For L2 multicast, up to 256
multicast addresses are supported. Multicast traffic can also be managed
by three port filtering modes to control the distribution behavior.
Broadcom®, the pulse logo, StrataXGS™, ContentAware™, and Connecting everything® are
trademarks of Broadcom Corporation and/or its subsidiaries in the United States and certain other
countries. All other trademarks mentioned are the property of their respective owners.
®
BROADCOM CORPORATION
16215 Alton Parkway, P.O. Box 57013
Irvine, California 92619-7013
© 2004 by BROADCOM CORPORATION. All rights reserved.
5651-PB00-R
04/05/04
Phone: 949-450-8700
Fax: 949-450-8710
E-mail: [email protected]
Web: www.broadcom.com
Similar pages