LE VDE 16A Power Relay For Micro wave oven 28.6 1.126 LE RELAYS FEATURES 12.4 .488 24.9 .980 28.6 1.126 12.4 .488 24.9 .980 4. Low operating power • Nominal operating power: 400mW/ 200mW (High sensitive type) 5. A wide variety of types • Product line consists of 4 types with different shapes and pins 6. Conforms to the various safety standards: • UL/CSA, TÜV, VDE approved and SEMKO available 1. Ideal for magnetron and heater loads 2. Excellent heat resistance • This satisfies UL coil insulation class B/ class F available 3. High insulation resistance • Creepage distance and clearances between contact and coil: Min. 8 mm .315 inch • Surge withstand voltage: Min. 10,000V mm inch SPECIFICATIONS Contact Characteristics Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity Max. switching power Rating (resistive load) Max. switching voltage Max. switching current Mechanical (at 180 cpm) Expected life (min. operations) Electrical (at 20 cpm) (Resistive load) 1 Form A Max. operating speed (at rated load) Initial insulation resistance*1 Between open Initial breakdown contacts voltage*2 Between contacts and coil Initial surge voltage between contact and coil*3 Operate time*4 (at nominal voltage) (at 20°C 68°F) 100 mΩ Silver alloy 16 A 277 V AC 4,432 V A 277 V AC 16 A 2 × 10 High sensitive 200 mW Min. 10,000 V Max. 20ms Functional*7 Vibration resistance Destructive Remarks ∗ Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section. *2 Detection current: 10mA *3 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981 *4 Excluding contact bounce time. *5 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs *6 Half-wave pulse of sine wave: 6 ms *7 Detection time: 10 µs *8 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24). TYPICAL APPLICATIONS 4,000 Vrms for 1 min. Temperature rise (at nominal voltage) (resistance method, contact current 16 A, 20°C 68°F) Functional*5 Shock resistance Destructive*6 105 Standard 400 mW 1,000 Vrms for 1 min. Release time (with diode)*4 (at nominal voltage) (at 20°C 68°F) 6 Coil Type Nominal operating power 20 cpm Min. 1,000 MΩ (at 500 V DC) Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature) Unit weight Ambient temp. Humidity Max. 20ms Max. 25ms (200 mW type) Max. 55°C Max. 45°C (200 mW type) Min. 200 m/s2{20 G} Min. 1,000 m/s2{100 G} 10 to 55Hz at double amplitude of 1.5mm 10 to 55Hz at double amplitude of 1.5mm –40°C to +85°C –40°F to +185°F 5 to 85% R.H. Approx. 17 g .60 oz ORDERING INFORMATION • Microwave ovens • Refrigerators • OA equipment Ex. A LE Product name Contact arrangement LE 1: 1 Form A 7: 1 Form A (200 mW) 1 2 B 12 Terminal shape Coil insulation class Coil voltage, V DC 2: TMP type/PCB side three terminals (includes one dummy terminal) 3: TMP type/PCB side three terminals 4: TMP type/PCB side four terminals 5: PCB type (No tab terminals) B: Class B insulation F: Class F insulation 05: 5 18: 18 06: 6 24: 24 09: 9 48: 48 12: 12 UL/CSA, TÜV, VDE approved type is standard. Note: Standard packing; Carton: 100 pcs. Case 500 pcs. 43 LE TYPES 1. Standard type TMP type/PCB side three terminals (includes one dummy terminal) Part No. 5 ALE12❍05 6 ALE12❍06 9 ALE12❍09 1 Form A 12 ALE12❍12 18 ALE12❍18 24 ALE12❍24 48 ALE12❍48 ❍: Input the following letter. Class B: B, Class F: F Contact arrangement Coil voltage, V DC TMP type/PCB side three terminals TMP type/PCB side four terminals PCB type (No tab terminals) Part No. ALE13❍05 ALE13❍06 ALE13❍09 ALE13❍12 ALE13❍18 ALE13❍24 ALE13❍48 Part No. ALE14❍05 ALE14❍06 ALE14❍09 ALE14❍12 ALE14❍18 ALE14❍24 ALE14❍48 Part No. ALE15❍05 ALE15❍06 ALE15❍09 ALE15❍12 ALE15❍18 ALE15❍24 ALE15❍48 TMP type/PCB side three terminals TMP type/PCB side four terminals PCB type (No tab terminals) Part No. ALE73❍05 ALE73❍06 ALE73❍09 ALE73❍12 ALE73❍18 ALE73❍24 ALE73❍48 Part No. ALE74❍05 ALE74❍06 ALE74❍09 ALE74❍12 ALE74❍18 ALE74❍24 ALE74❍48 Part No. ALE75❍05 ALE75❍06 ALE75❍09 ALE75❍12 ALE75❍18 ALE75❍24 ALE75❍48 2. High sensitive type TMP type/PCB side three terminals (includes one dummy terminal) Part No. 5 ALE72❍05 6 ALE72❍06 9 ALE72 ❍09 1 Form A (High sensitivity: 12 ALE72❍12 200mW) 18 ALE72❍18 24 ALE72❍24 48 ALE72❍48 ❍: Input the following letter. Class B: B, Class F: F Contact arrangement Coil voltage, V DC COIL DATA (at 20°C 68°F) 1. Standard type Nominal voltage, V DC Pick-up voltage, V DC (max.) (at 20°C 68°F) Drop-out voltage, V DC (min.) (at 20°C 68°F) Coil resistance, Ω (±10%) (at 20°C 68°F) 5 6 9 12 18 24 48 3.75 4.5 6.75 9 13.5 18 36 0.25 0.3 0.45 0.6 0.9 1.2 2.4 63 90 203 360 810 1,440 5,760 Nominal voltage, V DC Pick-up voltage, V DC (max.) (at 20°C 68°F) Drop-out voltage, V DC (min.) (at 20°C 68°F) Coil resistance, Ω (±10%) (at 20°C 68°F) 5 6 9 12 18 24 48 3.75 4.5 6.75 9 13.5 18 36 0.25 0.3 0.45 0.6 0.9 1.2 2.4 125 180 405 720 1,620 2,880 11,520 Nominal operating current, mA (±10%) (at 20°C 68°F) 80 66.7 44.4 33.3 22.2 16.7 8.3 Nominal operating power, mW (at 20°C 68°F) 400 Maximum allowable voltage, V DC (at 20°C 68°F) 7.25 8.7 13.05 17.4 26.1 34.8 69.6 2. High sensitive type 44 Nominal operating current, mA (±10%) (at 20°C 68°F) 40 33.3 22.2 16.7 11.1 8.3 4.2 Nominal operating power, mW (at 20°C 68°F) 200 Maximum allowable voltage, V DC (at 20°C 68°F) 7.25 8.7 13.05 17.4 26.1 34.8 69.6 LE mm inch DIMENSIONS 1. TMP type PCB side three terminals (includes one dummy terminal) 6.0 .236 #187 terminal 4.75 .187 0.5 .020 PC board pattern (Bottom view) 6.35 .250 8.5 .335 2-1.3 dia .051 dia 1.8 dia .071 dia 7.5 .295 24.9 .980 26.0 1.024 Tolerance : ±0.1 ±.004 Schematic (Bottom view) 3.5 .138 1.8 .071 0.4 .016 0.8 .031 26.0 1.024 28.6 1.126 0.8 2.45 .031 .096 7.5 .295 12.4 .488 1.5 .059 0.8 .031 Com Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 No Coil mm inch PCB side three terminals 6.0 .236 #187 terminal 4.75 .187 0.5 .020 PC board pattern (Bottom view) 6.35 .250 8.5 .335 3-1.3 dia .051 dia 7.5 .295 24.9 .980 23.5 .925 Tolerance : ±0.1 ±.004 Schematic (Bottom view) 3.5 .138 1.8 .071 0.4 .016 0.5 .020 23.5 .925 28.6 1.126 1.0 .039 2.45 .096 7.5 .295 12.4 .488 0.8 .031 Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: Com Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 No Coil mm inch PCB side four terminals #187 terminal 6.0 .236 PC board pattern (Bottom view) 4.75 .187 0.5 .020 4-1.3 dia .071 dia 6.35 .250 8.5 .335 7.5 .295 20.0 .787 24.9 .980 3.5 .138 Tolerance : ±0.1 ±.004 Schematic (Bottom view) 3.5 .138 1.8 .071 0.4 .016 0.5 .020 20.0 .787 28.6 1.126 3.5 .138 1.0 .039 2.45 .096 1.0 .039 Com 7.5 .295 12.4 .488 Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 No Coil 45 LE mm inch 2. PCB type PCB side four terminals (No tab terminals) PC board pattern (Bottom view) 4-1.3 dia .071 dia 24.9 .980 7.5 .295 3.5 .138 1.8 .071 0.4 .016 0.5 20.0 .020 .787 28.6 1.126 1.0 .039 2.45 .096 3.5 .138 20.0 .787 1.0 .039 3.5 .138 Tolerance : ±0.1 ±.004 7.5 .295 12.4 .488 Schematic (Bottom view) Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 No Coil Com REFERENCE DATA 1-1. Coil temperature rise (400mW type) 1-2. Coil temperature rise (200mW type) Sample: ALE15B12, 6 pcs. Point measured: coil inside Ambient temperature: 25°C 77°F, 85°C 185°F Sample: ALE75B12, 6 pcs. Point measured: coil inside Ambient temperature: 23.7°C 74.66°F, 85°C 185°F 12A 0A 40 30 20 16A 0A 10 0 100 16A 23.7°C 85°C 25 Temperature rise, °C 16A 12A 0A 16A 50 Temperature rise, °C 30 25°C 85°C 250V AC resistive load 20 0A Life, ×104 60 2. Life curve 15 10 10 5 0 80 100 0 145 0 Coil applied voltage, %V 80 100 1 145 Coil applied voltage, %V 0 2 4 6 8 10 12 14 16 Contact current, A 3. Electrical life test (16 A 277 V AC, resistive load) Sample: ALE15B12, 6 pcs. Operation frequency: 20 times/min. (ON/OFF = 1.5s: 1.5s) Ambient temperature: Room temperature Circuit: COM NO 277V AC 60Hz 12V DC Pick-up and drop-out voltage, %V 70 Pick-up voltage 60 Max. x Min. 50 40 30 Drop-out voltage 20 Max. x Min. 10 G 0 10 0 No. of operations, ×104 For Cautions for Use, see Relay Technical Information (Page 11 to 39). 12/27/2002 46 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd. Go To Online Catalog