To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. DATA SHEET MOS FIELD EFFECT TRANSISTOR NP48N055ELE, NP48N055KLE NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE SWITCHING N-CHANNEL POWER MOS FET DESCRIPTION These products are N-channel MOS Field Effect Transistors designed for high current switching applications. <R> ORDERING INFORMATION PART NUMBER NP48N055ELE-E1-AY Note1, 2 NP48N055ELE-E2-AY Note1, 2 NP48N055KLE-E1-AY Note1 NP48N055KLE-E2-AY Note1 NP48N055CLE-S12-AZ Note1, 2 NP48N055DLE-S12-AY Note1, 2 NP48N055MLE-S18-AY Note1 NP48N055NLE-S18-AY Note1 LEAD PLATING PACKING PACKAGE TO-263 (MP-25ZJ) typ. 1.4 g Pure Sn (Tin) Tape 800 p/reel TO-263 (MP-25ZK) typ. 1.5 g Sn-Ag-Cu Pure Sn (Tin) TO-220 (MP-25) typ. 1.9 g Tube 50 p/tube Notes 1. Pb-free (This product does not contain Pb in the external electrode.) 2. Not for new design TO-262 (MP-25 Fin Cut) typ. 1.8 g TO-220 (MP-25K) typ. 1.9 g TO-262 (MP-25SK) typ. 1.8 g (TO-220) FEATURES • Channel temperature 175 degree rated • Super low on-state resistance RDS(on)1 = 17 mΩ MAX. (VGS = 10 V, ID = 24 A) RDS(on)2 = 21 mΩ MAX. (VGS = 5 V, ID = 24 A) (TO-262) RDS(on)3 = 24 mΩ MAX. (VGS = 4.5 V, ID = 24 A) • Low input capacitance Ciss = 1970 pF TYP. • Built-in gate protection diode (TO-263) The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. D14095EJ5V0DS00 (5th edition) Date Published October 2007 NS Printed in Japan 1999, 2000, 2007 The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Drain to Source Voltage (VGS = 0 V) VDSS 55 V Gate to Source Voltage (VDS = 0 V) VGSS ±20 V Drain Current (DC) (TC = 25°C) ID(DC) ±48 A ID(pulse) ±140 A Drain Current (pulse) Note1 Total Power Dissipation (TA = 25°C) PT 1.8 W Total Power Dissipation (TC = 25°C) PT 85 W Channel Temperature Tch 175 °C Tstg −55 to +175 °C Note2 IAS 46/27/10 A Note2 EAS 2.1/73/100 mJ Storage Temperature Single Avalanche Current Single Avalanche Energy Notes 1. PW ≤ 10 μs, Duty cycle ≤ 1% 2. Starting Tch = 25°C, RG = 25 Ω, VGS = 20 → 0 V (see Figure 4.) THERMAL RESISTANCE Channel to Case Thermal Resistance Rth(ch-C) 1.76 °C/W Channel to Ambient Thermal Resistance Rth(ch-A) 83.3 °C/W 2 Data Sheet D14095EJ5V0DS NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE ELECTRICAL CHARACTERISTICS (TA = 25°C) CHARACTERISTICS SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Zero Gate Voltage Drain Current IDSS VDS = 55 V, VGS = 0 V 10 μA Gate Leakage Current IGSS VGS = ±20 V, VDS = 0 V ±10 μA Gate to Source Threshold Voltage VGS(th) VDS = VGS, ID = 250 μA 1.5 2.0 2.5 V Forward Transfer Admittance | yfs | VDS = 10 V, ID = 24 A 13 25 Drain to Source On-state Resistance RDS(on)1 VGS = 10 V, ID = 24 A 13 17 mΩ RDS(on)2 VGS = 5 V, ID = 24 A 16 21 mΩ RDS(on)3 VGS = 4.5 V, ID = 24 A 18 24 mΩ Input Capacitance Ciss VDS = 25 V, 1970 3000 pF Output Capacitance Coss VGS = 0 V, 250 380 pF 130 240 pF f = 1 MHz S Reverse Transfer Capacitance Crss Turn-on Delay Time td(on) VDD = 28 V, ID = 24 A, 17 38 ns tr VGS = 10 V, 11 27 ns 54 110 ns 9.3 23 ns VDD = 44 V, VGS = 10 V, ID = 48 A 40 60 nC QG2 VDD = 44 V, 21 32 nC QGS VGS = 5 V, 7 nC 10 nC IF = 48 A, VGS = 0 V 1.0 V Rise Time Turn-off Delay Time td(off) Fall Time tf Total Gate Charge QG1 Gate to Source Charge RG = 1 Ω ID = 48 A Gate to Drain Charge QGD Body Diode Forward Voltage VF(S-D) Reverse Recovery Time trr IF = 48 A, VGS = 0 V, 40 ns Qrr di/dt = 100 A/μs 55 nC Reverse Recovery Charge TEST CIRCUIT 1 AVALANCHE CAPABILITY D.U.T. RG = 25 Ω PG. VGS = 20 → 0 V TEST CIRCUIT 2 SWITCHING TIME D.U.T. L 50 Ω VGS RL Wave Form RG PG. VDD VGS 0 VGS 10% 90% VDD VDS 90% BVDSS IAS 90% VDS VGS 0 VDS 10% 0 10% Wave Form VDS ID τ VDD Starting Tch τ = 1 μs Duty Cycle ≤ 1% td(on) tr ton td(off) tf toff TEST CIRCUIT 3 GATE CHARGE D.U.T. IG = 2 mA PG. 50 Ω RL VDD Data Sheet D14095EJ5V0DS 3 NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE TYPICAL CHARACTERISTICS (TA = 25°C) Figure2. TOTAL POWER DISSIPATION vs. CASE TEMPERATURE Figure1. DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA PT - Total Power Dissipation - W dT - Percentage of Rated Power - % 140 100 80 60 40 20 0 0 25 50 75 120 100 80 60 40 20 0 100 125 150 175 200 25 0 50 TC - Case Temperature - °C 100 125 150 175 200 Figure4. SINGLE AVALANCHE ENERGY DERATING FACTOR Figure3. FORWARD BIAS SAFE OPERATING AREA 120 ID(pulse) 100 ) on GS ( DS RV ( d ite ) Lim0 V 1 = Po Lim wer ite Dis d sip 0μ s 1m DC =1 0μ 10 ID(DC) 10 PW EAS - Single Avalanche Energy - mJ 1000 ID - Drain Current - A 75 TC - Case Temperature - °C s s ati on 1 Single pulse TC = 25°C 0.1 0.1 1 10 100 100 mJ 73 mJ 80 IAS = 10 A 27 A 46 A 60 40 20 2.1 mJ 0 25 100 50 75 100 125 150 175 Starting Tch - Starting Channel Temperature - °C VDS - Drain to Source Voltage - V Figure5. TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH rth(t) - Transient Thermal Resistance - °C/W 1000 100 Rth(ch-A) = 83.3°C/W 10 Rth(ch-C) = 1.76°C/W 1 0.1 Single pulse 0.01 10 μ 100 μ 1m 10 m 100 m 1 PW - Pulse Width - s 4 Data Sheet D14095EJ5V0DS 10 100 1000 NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE Figure6. FORWARD TRANSFER CHARACTERISTICS 1000 Figure7. DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE 140 Pulsed Pulsed ID - Drain Current - A ID - Drain Current - A 120 100 TA = −40°C 25°C 75°C 150°C 175°C 10 1 VGS = 10 V 100 5V 80 60 4.5 V 40 20 0.1 0 1 2 3 5 4 6 1.0 0 10 TA = 175°C 75°C 25°C −40°C 0.1 0.01 0.01 0.1 1 10 100 RDS(on) - Drain to Source On-state Resistance - mΩ ID - Drain Current - A Figure10. DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 40 Pulsed 30 VGS = 4.5 V 5V 10 V 20 10 0 1 10 100 1000 RDS(on) - Drain to Source On-state Resistance - mΩ Figure8. FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT 100 VDS = 10 V Pulsed VGS(th) - Gate to Source Threshold Voltage - V | yfs | - Forward Transfer Admittance - S VGS - Gate to Source Voltage - V 1 3.0 2.0 4.0 VDS - Drain to Source Voltage - V Figure9. DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE 40 Pulsed 35 30 25 ID = 24 A 20 15 10 5 0 0 5 10 15 20 VGS - Gate to Source Voltage - V Figure11. GATE TO SOURCE THRESHOLD VOLTAGE vs. CHANNEL TEMPERATURE 3.0 VDS = VGS ID = 250 μA 2.5 2.0 1.5 1.0 0.5 0 −50 0 50 100 150 Tch - Channel Temperature - °C ID - Drain Current - A Data Sheet D14095EJ5V0DS 5 Figure12. DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE 45 Pulsed 40 35 VGS = 4.5 V 5V 10 V 30 25 20 15 10 Figure13. SOURCE TO DRAIN DIODE FORWARD VOLTAGE 1000 Pulsed IF - Diode Forward Current - A VGS = 10 V 10 0V 1 5 ID = 24 A 0 −50 0 50 100 0.1 0 150 0.5 Figure15. SWITCHING CHARACTERISTICS 1000 VGS = 0 V f = 1 MHz Ciss 1000 Coss 100 Crss 10 0.1 1 10 td(on), tr, td(off), tf - Switching Time - ns 10000 tf 100 td(off) td(on) tr 10 VDD = 28 V VGS = 10 V RG = 1 Ω 1 0.1 100 100 10 10 100 Figure17. DYNAMIC INPUT/OUTPUT CHARACTERISTICS VDS - Drain to Source Voltage - V trr - Reverse Recovery Time - ns di/dt = 100 A/μs VGS = 0 V 1 80 16 70 14 12 60 VDD = 44 V 28 V 11 V 50 10 VGS 40 8 6 30 4 20 VDS 10 2 ID = 48 A 0 0 10 20 30 QG - Gate Charge - nC IF - Diode Forward Current - A 6 100 ID - Drain Current - A Figure16. REVERSE RECOVERY TIME vs. DIODE FORWARD CURRENT 1 0.1 10 1 VDS - Drain to Source Voltage - V 1000 1.5 1.0 VF(S-D) - Source to Drain Voltage - V Tch - Channel Temperature - °C Figure14. CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE Ciss, Coss, Crss - Capacitance - pF 100 Data Sheet D14095EJ5V0DS 40 0 VGS - Gate to Source Voltage - V RDS(on) - Drain to Source On-state Resistance - mΩ NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE PACKAGE DRAWINGS (Unit: mm) Note 1.3 ± 0.2 10.0 ± 0.3 No plating 7.88 MIN. 4 2 3 1.4 ± 0.2 0.7 ± 0.2 2.54 TYP. 9.15 ± 0.3 8.0 TYP. 8.5 ± 0.2 1 5.7 ± 0.4 1.0 ± 0.5 4 4.45 ± 0.2 0.025 to 0.25 P. .5R 0 TY R 0.8 2.54 TYP. P. TY 0.5 ± 0.2 0.75 ± 0.2 0.5 ± 2.8 ± 0.2 1.Gate 2.Drain 3.Source 4.Fin (Drain) 1 2 1.Gate 2.Drain 2.5 3.Source 15.5 MAX. 5.9 MIN. 4 1 0.75 ± 0.1 2.54 TYP. 1.3 ± 0.2 12.7 MIN. 6.0 MAX. 1 2 3 0.5 ± 0.2 2.8 ± 0.2 0.75 ± 0.3 2.54 TYP. 2 3 1.0 ± 0.5 10 TYP. Note 4.8 MAX. 1.3 ± 0.2 8.5 ± 0.2 1.3 ± 0.2 4.Fin (Drain) 12.7 MIN. 4.8 MAX. φ 3.6 ± 0.2 10.0 TYP. 1.3 ± 0.2 3 4)TO-262 (MP-25 Fin Cut) 4 8ο 0.25 Note 10.6 MAX. 0.2 0 to 2.54 3)TO-220 (MP-25) 1.3 ± 0.2 2.54 ± 0.25 4.8 MAX. 10 TYP. 1.35 ± 0.3 2)TO-263 (MP-25ZK) 15.25 ± 0.5 1)TO-263 (MP-25ZJ) 3.0 ± 0.3 <R> 0.5 ± 0.2 2.8 ± 0.2 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain) 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain) Note Not for new design Data Sheet D14095EJ5V0DS 7 NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE 1 2 3 0.8 ± 0.1 0.5 ± 0.2 2.54 TYP. 2.5 ± 0.2 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain) 1.3 ± 0.2 1.27 ± 0.2 3.1 ± 0.3 15.9 MAX. 1.27 ± 0.2 4 4.45 ± 0.2 10.1 ± 0.3 3 10.0 ± 0.2 13.7 ± 0.3 13.7 ± 0.3 1 2 4.45 ± 0.2 1.3 ± 0.2 3.1 ± 0.2 4 φ 3.8 ± 0.2 6.3 ± 0.3 2.8 ± 0.3 10.0 ± 0.2 1.2 ± 0.3 6)TO-262 (MP-25SK) 8.9 ± 0.2 5)TO-220 (MP-25K) 0.8 ± 0.1 0.5 ± 0.2 2.54 TYP. 2.5 ± 0.2 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain) EQUIVALENT CIRCUIT Drain Body Diode Gate Gate Protection Diode Remark Source The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is externally required if a voltage exceeding the rated voltage may be applied to this device. 8 Data Sheet D14095EJ5V0DS NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE <R> TAPE INFORMATION There are two types (-E1, -E2) of taping depending on the direction of the device. Draw-out side <R> Reel side MARKING INFORMATION NEC 48N055 LE <R> Pb-free plating marking Abbreviation of part number Lot code RECOMMENDED SOLDERING CONDITIONS These products should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, please contact an NEC Electronics sales representative. For technical information, see the following website. Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html) Soldering Method Soldering Conditions Infrared reflow Maximum temperature (Package's surface temperature): 260°C or below MP-25ZJ, MP-25ZK Time at maximum temperature: 10 seconds or less Time of temperature higher than 220°C: 60 seconds or less Preheating time at 160 to 180°C: 60 to 120 seconds Recommended Condition Symbol IR60-00-3 Maximum number of reflow processes: 3 times Maximum chlorine content of rosin flux (percentage mass): 0.2% or less Wave soldering Maximum temperature (Solder temperature): 260°C or below MP-25, MP-25K, MP-25SK, Time: 10 seconds or less MP-25 Fin Cut Maximum chlorine content of rosin flux: 0.2% (wt.) or less Partial heating Maximum temperature (Pin temperature): 350°C or below MP-25ZJ, MP-25ZK, Time (per side of the device): 3 seconds or less MP-25K, MP-25SK Maximum chlorine content of rosin flux: 0.2% (wt.) or less Partial heating Maximum temperature (Pin temperature): 300°C or below MP-25, MP-25 Fin Cut Time (per side of the device): 3 seconds or less THDWS P350 P300 Maximum chlorine content of rosin flux: 0.2% (wt.) or less Caution Do not use different soldering methods together (except for partial heating). Data Sheet D14095EJ5V0DS 9 NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE • The information in this document is current as of October, 2007. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1