UNISONIC TECHNOLOGIES CO., LTD DB107G DIODE 1.0A GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER + DESCRIPTION The UTC DB107G is a 1.0A glass passivated single-phase bridge rectifier. The UTC DB107G is suitable for automatic insertion. - DFM FEATURES * Surge overload ratings to 30 amperes peak * Recommended for non-automatic applications * Suitable for automatic insertion * Glass passivated chip junctions SYBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free DB107GL-DFM-T DB107GP-DFM-T Package Packing DFM Tube MARKING www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 4 QW-R227-003.A DB107G DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise noted) PARAMETER SYMBOL RATINGS UNIT Repetitive Peak Reverse Voltage VRRM 1000 V RMS Voltage VRMS 700 V Continuous Reverse Voltage VR 1000 V Forward Rectified Current IO 1.0 A 0.06”(1.5mm) lead lenth at TA=40°C (Note 2) Peak Forward Surge Current 8.3ms Single Half IFSM 50 A Sine-Wave Superimposed on Rated Load I2t Rating for Fusing t<8.3ms I2t 10 A2s Operating Temperature TJ -65~+150 °C Storage Temperature TSTG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS (Note 2) PARAMETER Junction to Ambient SYMBOL θJA RATINGS 40 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS Forward Voltage (t<8.3ms ) VF IF=1.0A VR=VRRM, TA=25°C DC Reverse Current at Rated DC Blocking IR Voltage VR=VRRM, TA=100°C Junction Capacitance Per Element (Note 1) CJ Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V D.C. 2. Mounted on P.C.B with 0.51"×0.51"(13×13mm) copper pads. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 1.10 V 10 μA 500 μA 25 pF 2 of 4 QW-R227--03.A DB107G DIODE TYPICAL CHARACTERISTICS Mximum Non-repetitive Surge Current 0.8 40 Forward Peak Surge Current (A) 50 0.6 0.4 0.2 0 100 50 Ambient Temperature, TA (°C) 20 10 0 150 Pulse Wldth 8.3ms SINGLE HALF-SINE-WAVE (Jedec Method) 1 2 5 10 20 50 100 Number Ofcycles At 60Hz Junction Capacitance (pF) Junction Capacitance (pF) Instantaneous Forward Current (A) 0.1 Single Phase Half Wave 60Hz Resistive or Inductive Load 30 Instantaneous Reverse Current (μA) Average Forward Current (A) Forward Current Derating Curve 1.0 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 4 QW-R227--03.A DB107G DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R227--03.A