NSTB1005DXV5T1G Dual Common Base-Collector Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network http://onsemi.com The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base−emitter resistor. These digital transistors are designed to replace a single device and its external resistor bias network. The BRT eliminates these individual components by integrating them into a single device. The NSTB1005DXV5T1 contains two complementary BRT devices are housed in the SOT−553 package which is ideal for low power surface mount applications where board space is at a premium. 3 2 R1 1 R2 Q2 R2 Q1 R1 4 5 Features • • • • • Simplifies Circuit Design Reduces Board Space Reduces Component Count Available in 8 mm, 7 inch Tape and Reel This is a Pb−Free Device 5 1 SOT−553 CASE 463B MAXIMUM RATINGS (TA = 25°C unless otherwise noted, common for Q1 MARKING DIAGRAM and Q2, − minus sign for Q1 (PNP) omitted) 5 Symbol Value Unit Collector-Base Voltage VCBO 50 Vdc Collector-Emitter Voltage VCEO 50 Vdc IC 100 mAdc Symbol Max Unit 357 2.9 mW mW/°C RqJA 350 °C/W Symbol Max Unit 500 4.0 mW mW/°C RqJA 250 °C/W TJ, Tstg −55 to +150 °C Rating Collector Current THERMAL CHARACTERISTICS Characteristic (One Junction Heated) Total Device Dissipation TA = 25°C (Note 1) Derate above 25°C (Note 1) Thermal Resistance − Junction-to-Ambient (Note 1) Characteristic (Both Junctions Heated) Total Device Dissipation TA = 25°C (Note 1) Derate above 25°C (Note 1) Thermal Resistance − Junction-to-Ambient (Note 1) Junction and Storage Temperature UC M G G 1 UC = Specific Device Code M = Date Code G = Pb−Free Package (Note: Microdot may be in either location) PD PD ORDERING INFORMATION Device Package Shipping† NSTB1005DXV5T1G SOT−553 (Pb−Free) 4000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. 1. FR−4 @ Minimum Pad © Semiconductor Components Industries, LLC, 2010 October, 2010 − Rev. 1 1 Publication Order Number: NSTB1005DXV5/D NSTB1005DXV5T1G ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Min Typ Max Unit Collector−Base Cutoff Current (VCB = 50 V, IE = 0) ICBO − − 100 nAdc Collector−Emitter Cutoff Current (VCE = 50 V, IB = 0) ICEO − − 500 nAdc Emitter−Base Cutoff Current (VEB = 6.0 V, IC = 0) IEBO − − 0.1 mAdc Collector−Base Breakdown Voltage (IC = 10 mA, IE = 0) V(BR)CBO 50 − − Vdc Collector−Emitter Breakdown Voltage (IC = 2.0 mA, IB = 0) V(BR)CEO 50 − − Vdc hFE 80 140 − VCE(sat) − − 0.25 Vdc Output Voltage (on) (VCC = 5.0 V, VB = 3.5 V, RL = 1.0 kW) VOL − − 0.2 Vdc Output Voltage (off) (VCC = 5.0 V, VB = 0.5 V, RL = 1.0 kW) VOH 4.9 − − Vdc R1 32.9 47 61.1 kW R1/R2 0.8 1.0 1.2 Collector-Base Cutoff Current (VCB = 50 V, IE = 0) ICBO − − 100 nAdc Collector-Emitter Cutoff Current (VCB = 50 V, IB = 0) ICEO − − 500 nAdc Emitter-Base Cutoff Current (VEB = 6.0, IC = 0) IEBO − − 0.1 mAdc Collector-Base Breakdown Voltage (IC = 10 mA, IE = 0) V(BR)CBO 50 − − Vdc Collector-Emitter Breakdown Voltage (IC = 2.0 mA, IB = 0) V(BR)CEO 50 − − Vdc hFE 80 140 − VCE(SAT) − − 0.25 Vdc Output Voltage (on) (VCC = 5.0 V, VB = 2.5 V, RL = 1.0 kW) VOL − − 0.2 Vdc Output Voltage (off) (VCC = 5.0 V, VB = 0.5 V, RL = 1.0 kW) VOH 4.9 − − Vdc Input Resistor R1 33 47 61 kW Resistor Ratio R1/R2 0.8 1.0 1.2 Characteristic Q1 TRANSISTOR: PNP − OFF CHARACTERISTICS ON CHARACTERISTICS DC Current Gain Collector−Emitter Saturation Voltage (IC = 10 mA, IE = 0.3 mA) Input Resistor Resistor Ratio Q2 TRANSISTOR: NPN − OFF CHARACTERISTICS ON CHARACTERISTICS DC Current Gain (VCE = 10 V, IC = 5.0 mA) Collector−Emitter Saturation Voltage (IC = 10 mA, IB = 0.3 mA) PD , POWER DISSIPATION (MILLIWATTS) 250 200 150 100 50 0 -50 RqJA = 833°C/W 0 50 100 TA, AMBIENT TEMPERATURE (°C) Figure 1. Derating Curve http://onsemi.com 2 150 NSTB1005DXV5T1G 1000 1 hFE , DC CURRENT GAIN (NORMALIZED) VCE(sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS − PNP TRANSISTOR IC/IB = 10 TA=-25°C 0.1 25°C 75°C 0.01 0 20 25°C 100 -25°C IC, COLLECTOR CURRENT (mA) 10 IC, COLLECTOR CURRENT (mA) Figure 2. VCE(sat) versus IC Figure 3. DC Current Gain 50 1 100 IC, COLLECTOR CURRENT (mA) 3 2 1 0 10 20 30 40 VR, REVERSE BIAS VOLTAGE (VOLTS) TA=-25°C 10 1 0.1 0.01 0.001 50 VO = 5 V 0 Figure 4. Output Capacitance 1 2 3 4 5 6 7 Vin, INPUT VOLTAGE (VOLTS) VO = 0.2 V TA=-25°C 10 25°C 75°C 1 0 10 8 9 Figure 5. Output Current versus Input Voltage 100 0.1 100 25°C 75°C f = 1 MHz lE = 0 V TA = 25°C V in , INPUT VOLTAGE (VOLTS) Cob , CAPACITANCE (pF) TA=75°C 10 40 4 0 VCE = 10 V 20 30 IC, COLLECTOR CURRENT (mA) 40 50 Figure 6. Input Voltage versus Output Current http://onsemi.com 3 10 NSTB1005DXV5T1G 10 1000 VCE = 10 V IC/IB = 10 hFE, DC CURRENT GAIN VCE(sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — NPN TRANSISTOR 1 25°C TA=-25°C 75°C 0.1 TA=75°C 25°C -25°C 100 0.01 0 10 50 20 40 IC, COLLECTOR CURRENT (mA) 10 IC, COLLECTOR CURRENT (mA) 1 Figure 7. VCE(sat) versus IC Figure 8. DC Current Gain 1 100 f = 1 MHz IE = 0 mA TA = 25°C IC, COLLECTOR CURRENT (mA) 0.4 0.2 0 0 25°C 75°C 0.6 TA=-25°C 10 1 0.1 0.01 VO = 5 V 0.001 50 10 20 30 40 VR, REVERSE BIAS VOLTAGE (VOLTS) 0 2 4 6 Vin, INPUT VOLTAGE (VOLTS) 100 VO = 0.2 V TA=-25°C 10 25°C 75°C 1 0.1 0 10 8 10 Figure 10. Output Current versus Input Voltage Figure 9. Output Capacitance V in , INPUT VOLTAGE (VOLTS) Cob , CAPACITANCE (pF) 0.8 100 20 30 40 50 IC, COLLECTOR CURRENT (mA) Figure 11. Input Voltage versus Output Current http://onsemi.com 4 NSTB1005DXV5T1G PACKAGE DIMENSIONS SOT−553 XV5 SUFFIX CASE 463B−01 ISSUE B D −X− 5 A 4 1 e 2 E −Y− 3 b NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. L HE DIM A b c D E e L HE c 5 PL 0.08 (0.003) M X Y MILLIMETERS NOM MAX 0.55 0.60 0.22 0.27 0.13 0.18 1.60 1.70 1.20 1.30 0.50 BSC 0.10 0.20 0.30 1.50 1.60 1.70 MIN 0.50 0.17 0.08 1.50 1.10 INCHES NOM 0.022 0.009 0.005 0.063 0.047 0.020 BSC 0.004 0.008 0.059 0.063 MIN 0.020 0.007 0.003 0.059 0.043 MAX 0.024 0.011 0.007 0.067 0.051 0.012 0.067 SOLDERING FOOTPRINT* 0.3 0.0118 0.45 0.0177 1.35 0.0531 1.0 0.0394 0.5 0.5 0.0197 0.0197 SCALE 20:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NSTB1005DXV5/D