E/H Vishay Thin Film QPL MIL-PRF-55342 Qualified Thin Film Resistor Chips FEATURES SURFACE MOUNT SURFACE MOUNT CHIPS • Established reliability, “R” failure rate level • High purity alumina substrate for high power Actual Size M55342/02 • Wraparound termination featuring a tenacious adhesion layer covered with an electroplated nickel barrier layer for + 150°C operating conditions • Very low noise and voltage coefficient Thin Film Mil chip resistors feature all sputtered wraparound termination for excellent adhesion and dimensional uniformity. They are ideal in applications requiring stringent performance requirements. Established reliability is assured through 100% screening and extensive environmental lot testing. Wafer is sawed producing exact dimensions and clean, straight edges. • Non-inductive NOTE: Specification changed by DSCC from MIL-R-55342 to MIL-PRF-55342. • Antistatic waffle pack or tape and reel packaging available • Laser-trimmed tolerances to ± 0.1% • Wraparound resistance less than 0.010 ohms typical • In-lot tracking less than 5ppm/°C • Complete MIL-testing available in-house TYPICAL PERFORMANCE CONSTRUCTION Passivation Resistor Film ABS Solder coating Nickel barrier TCR 25 TOL 0.1 High Purity Alumina Substrate Adhesion layer STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS TAMELOX® MATERIAL Absolute TCR: Absolute Tolerance: Stability: ∆R Absolute Voltage Coefficient Operating Temperature Range Storage Temperature Range Noise ± 25ppm/°C to ± 100ppm/°C ± 0.1% ± 0.1% ± 0.5ppm/Volt - 55°C to + 125°C - 55°C to + 150°C - 25dB - 55°C to + 125°C + 25°C 2000 hrs. @ + 70°C 100ppm 1 year @ + 25°C Shelf Life Stability DIMENSIONS CASE SIZE M55342/01 M55342/02 M55342/03 M55342/04 M55342/05 M55342/06 D55342/07 M55342/08 M55342/09 M55342/10 M55342/11 M55342/12 TERM. B B B B B B B B B B B B L 0.050 ± 0.005 0.055 ± 0.006 0.105 ± 0.007 0.155 ± 0.007 0.230 ± 0.007 0.080 ± 0.006 0.126 ± 0.008 0.209 ± 0.009 0.259 ± 0.009 0.105 ± 0.007 0.040 ± 0.005 0.064 ± 0.006 W 0.025 ± 0.005 0.050 ± 0.005 0.050 ± 0.005 0.050 ± 0.005 0.075 ± 0.005 0.050 ± 0.005 0.063 ± 0.005 0.098 ± 0.005 0.124 ± 0.005 0.100 ± 0.005 0.025 ± 0.005 0.032 ± 0.005 T 0.010 to 0.030 0.012 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.010 to 0.030 0.010 to 0.033 D 0.010 ± 0.005 0.010 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.020 ± 0.005 0.016 ± 0.008 0.020 + 0.005, - 0.010 0.020 ± 0.005 0.020 ± 0.005 0.015 ± 0.005 0.010 ± 0.005 0.012 ± 0.005 E 0.015 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.020 ± 0.005 0.015 ± 0.005 0.020 + 0.005, - 0.010 0.020 ± 0.005 0.020 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 VISHAY THIN FILM • FRANCE +33.4.93.37.28.24 FAX: +33.4.93.37.27.31 • GERMANY +49.9287.710 FAX: +49 9287.70435 • ISRAEL +972.3.557.0945 FAX: +972.3.558.9121 • ITALY + 39.2.300.11919 FAX: +39.2.300.11999 • JAPAN +81.3.5464.6411 FAX: +81.3.5464.6433 • SINGAPORE +65.788.6668 FAX: +65.788.0988 • SWEDEN +46.8.594.70590 FAX: +46.8.594.70581 • UK +44 191 514 8237 FAX: +44 1953 457 722 • USA: (610) 407-4800 FAX: (610) 640-9081 www.vishay.com 40 Document Number: 60018 Revision 08-Oct-04 QPL MIL-PRF-55342 Qualified Thin Film Resistor Chips Vishay Thin Film D DIMENSIONS (Continued) W T SURFACE MOUNT E/H E L MAX. WORKING VOLTAGE M55342/01 M55342/02 M55342/03 M55342/04 M55342/05 M55342/06 D55342/07 M55342/08 M55342/09 M55342/10 M55342/11 M55342/12 40 40 40 40 40 50 100 150 200 75 25 50 POWER RATING (mW) CHARACTERISTIC E&H K 10 20 25 50 50 100 100 150 200 225 50 100 125 250 400 800 500 1000 250 500 40 40 70 70 RESISTANCE RANGE (ohms) (0.1%) 100 – 130K 100 – 301K 100 – 649K 100 – 1M 100 – 1.75M 100 – 475K 100 – 1M 100 – 2M 100 – 3M 100 – 1M 100 – 71.5K 100 – 160K (1%, 2%, 5%, 10%) 59 – 130K 20 – 301K 10 – 649K 10 – 1M 10 – 1.75M 10 – 475K 10 – 1M 10 – 2M 10 – 3M 50 – 1M 59 – 71.5K 20 – 160K ENVIRONMENTAL TESTS MECHANICAL SPECIFICATIONS TEST Resistive Element Tamelox® Substrate Material Alumina MIL-PRF-55342 VISHAY LIMITS PERFORMANCE (∆R ±) (∆R ±) Thermal Shock 0.1% 0.020% Low Temperature Operation 0.1% 0.025% Short Time Overload 0.1% 0.050% High Temperature Exposure 0.1% 0.009% Resistance to Bonding 0.2% 0.006% Moisture Resistance 0.2% 0.004% ± 25ppm/°C < 15ppm/°C Life (2000 hrs @ + 70°C) 0.5% 0.0184% Life (10,000 hrs @ + 70°C) 2.0% 0.04% TCR Terminals Plating Gold Over Nickel SN 60/40 FSCM CAGE # - 57489 How to Order Series TCR Characteristic M55342 E = ±25 ppm/°C ≥ 49.9 ohms vs 100 ohms or H = ±50 ppm/°C D55342 /07 K = ±100 ppm/°C Case Size Termination Value and Tolerance Failure Rate 01 02 03 04 05 06 07 08 09 10 11 12 B = Solderable wraparound (nickel barrier) Three digits and a letter. Letter identifies tolerance, acts as multiplier and decimal locator. per 1000 hrs. Tolerance 0.1% 1% 2% 5% 10% Multiplier (X1Ω)A D G J M (X1KΩ)B E H K N (X1MΩ)C F T L P C M = 1.0% per 1000 hrs. P = 0.1% per 1000 hrs. R =0.01% per 1000 hrs. = Non ER Example: M55342K06B5E60R calls out QPL nickel barrier solderable wraparound termination chip resistor, 0705 size, 5600 ohms ±1.0%, ±100 ppm/°C TCR and “R” failure rate or 0.01% per 1,000 hours. Consult factory for other sizes. VISHAY THIN FILM • FRANCE +33.4.93.37.28.24 FAX: +33.4.93.37.27.31 • GERMANY +49.9287.710 FAX: +49 9287.70435 • ISRAEL +972.3.557.0945 FAX: +972.3.558.9121 • ITALY + 39.2.300.11919 FAX: +39.2.300.11999 • JAPAN +81.3.5464.6411 FAX: +81.3.5464.6433 • SINGAPORE +65.788.6668 FAX: +65.788.0988 • SWEDEN +46.8.594.70590 FAX: +46.8.594.70581 • UK +44 191 514 8237 FAX: +44 1953 457 722 • USA: (610) 407-4800 FAX: (610) 640-9081 Document Number: 60018 Revision 08-Oct-04 www.vishay.com 41 SURFACE MOUNT CHIPS CASE SIZE