IDT IDT6167SA70Y Cmos static ram 16k (16k x 1-bit) Datasheet

IDT6167SA
IDT6167LA
CMOS STATIC RAM
16K (16K x 1-BIT)
Integrated Device Technology, Inc.
FEATURES:
• High-speed (equal access and cycle time)
— Military: 15/20/25/35/45/55/70/85/100ns (max.)
— Commercial: 15/20/25/35ns (max.)
• Low power consumption
• Battery backup operation — 2V data retention voltage
(IDT6167LA only)
• Available in 20-pin CERDIP and Plastic DIP, and 20-pin
SOJ
• Produced with advanced CMOS high-performance
technology
• CMOS process virtually eliminates alpha particle softerror rates
• Separate data input and output
• Military product compliant to MIL-STD-883, Class B
DESCRIPTION:
The lDT6167 is a 16,384-bit high-speed static RAM organized as 16K x 1. The part is fabricated using IDT’s highperformance, high reliability CMOS technology.
Access times as fast as 15ns are available. The circuit also
offers a reduced power standby mode. When CS goes HIGH,
the circuit will automatically go to, and remain in, a standby
mode as long as CS remains HIGH. This capability provides
significant system-level power and cooling savings. The lowpower (LA) version also offers a battery backup data retention
capability where the circuit typically consumes only 1µW
operating off a 2V battery.
All inputs and the output of the IDT6167 are TTL-compatible and operate from a single 5V supply, thus simplifying
system designs.
The IDT6167 is packaged in a space-saving 20-pin, 300 mil
Plastic DIP or CERDIP, Plastic 20-pin SOJ, providing high
board-level packing densities.
Military grade product is manufactured in compliance with
the latest revision of MIL-STD-883, Class B, making it ideally
suited to military temperature applications demanding the
highest level of performance and reliability.
FUNCTIONAL BLOCK DIAGRAM
A0
VCC
GND
16,384-BIT
MEMORY ARRAY
ADDRESS
DECODE
A13
DIN
CS
WE
I/O CONTROL
DOUT
CONTROL
LOGIC
2981 drw 01
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
MILITARY AND COMMERCIAL TEMPERATURE RANGES
1996 Integrated Device Technology, Inc.
For latest information contact IDT's web site at www.idt.com or fax-on-demand at 408-492-8391.
5.2
MARCH 1996
2981/5
1
IDT6167SA/LA
CMOS STATIC RAM 16K (16K x 1-BIT)
MILITARY AND COMMERCIAL TEMPERATURE RANGES
ABSOLUTE MAXIMUM RATINGS(1)
PIN CONFIGURATIONS
Symbol
A0
1
20
VCC
A1
2
19
A13
A2
3
18
A12
A3
4
D20-1,
17
A11
A4
5
&
16
A10
A5
6
S020-1
15
A9
A6
7
14
A8
DOUT
8
13
WE
A7
9
12
DIN
10
11
CS
GND
P20-1,
Mil.
Unit
–0.5 to +7.0
–0.5 to +7.0
V
Terminal Voltage
with Respect
to GND
TA
Operating
Temperature
0 to +70
–55 to +125
°C
TBIAS
Temperature
Under Bias
–55 to +125
–65 to +135
°C
TSTG
Storage
Temperature
–55 to +125
–65 to +150
°C
PT
Power Dissipation
1.0
1.0
W
IOUT
DC Output
Current
50
50
mA
NOTE:
2981 tbl 03
1. Stresses greater than those listed under ABSOLUTE MAXIMUM
RATINGS may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or any other
conditions above those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
DIP/SOJ
TOP VIEW
PIN DESCRIPTIONS
Address Inputs
CS
WE
Com’l.
VTERM
2981 drw 02
A0–A13
Rating
Chip Select
Write Enable
VCC
Power
DIN
DATAIN
DOUT
DATAOUT
GND
Ground
CAPACITANCE (TA = +25°C, f = 1.0MHz)
Symbol
Parameter(1)
Conditions
Max. Unit
2981 tbl 01
CIN
Input Capacitance
COUT
Output Capacitance
Mode
CS
WE
Output
Power
Standby
H
X
High-Z
Standby
Read
L
H
DATAOUT
Active
Write
L
L
High-Z
Active
NOTE:
1. H = VIH, L = VIL, X = Don't Care.
VOUT = 0V
7
pF
RECOMMENDED DC OPERATING
CONDITIONS
RECOMMENDED OPERATING
TEMPERATURE AND SUPPLY VOLTAGE
Commercial
pF
2981 tbl 02
Symbol
Military
7
NOTE:
2981 tbl 04
1. This parameter is determined by device characterization, but is not
production tested.
TRUTH TABLE (1)
Grade
VIN = 0V
Parameter
Min.
Typ.
VCC
Supply Voltage
4.5
5.0
5.5
V
GND
Supply Voltage
0
0
0
V
VIH
Input High Voltage
—
6.0
V
—
0.8
V
VIL
Temperature
GND
VCC
–55°C to +125°C
0V
5V ± 10%
0°C to +70°C
0V
5V ± 10%
Input Low Voltage
2.2
–0.5
(1)
Max. Unit
NOTE:
2981 tbl 05
1. VIL (min.) = –3.0V for pulse width less than 20ns, once per cycle.
2981 tbl 06
5.2
2
IDT6167SA/LA
CMOS STATIC RAM 16K (16K x 1-BIT)
MILITARY AND COMMERCIAL TEMPERATURE RANGES
DC ELECTRICAL CHARACTERISTICS(1)
(VCC = 5.0V ± 10%, VLC = 0.2V, VHC = VCC – 0.2V)
6167SA/LA15
Symbol
ICC1
ICC2
ISB
ISB1
Parameter
Power Com’l.
6167SA/LA20
6167SA/LA25
Mil.
Com’l.
Mil.
Com’l.
Mil.
Unit
mA
Operating Power Supply Current
CS ≤ VIL, Outputs Open,
VCC = Max., f = 0(3)
SA
90
90
90
90
90
90
LA
55
60
55
60
55
60
Dynamic Operating Current
CS ≤ VIL, Outputs Open,
VCC = Max., f = fMAX(3)
SA
120
130
100
110
100
100
LA
100
110
80
85
70
75
Standby Power Supply Current
(TTL Level)
CS ≥ VIH, Outputs Open,
VCC = Max., f = fMAX(3)
SA
50
50
35
35
35
35
LA
35
35
30
30
25
25
Full Standby Power Supply Current
(CMOS Level)
CS ≥ VHC, VCC = Max.
VIN ≥ VHC or VIN ≤ VLC, f = 0(3)
SA
5
10
5
10
5
10
LA
0.9
2
0.05
2
0.05
0.9
mA
mA
mA
DC ELECTRICAL CHARACTERISTICS(1) (CONTINUED)
(VCC = 5.0V ± 10%, VLC = 0.2V, VHC = VCC – 0.2V)
6167SA/LA35 6167SA/LA45(2) 6167SA/LA55(2) 6167SA/LA70(2)
Symbol
Parameter
Power Com’l.
Com’l.
Mil.
Com’l.
Mil.
Com’l.
Mil.
Unit
90
—
90
—
90
—
90
mA
ICC1
Operating Power Supply Current
CS ≤ VIL, Outputs Open,
VCC = Max., f = 0(3)
SA
LA
55
60
—
60
—
60
—
60
ICC2
Dynamic Operating Current
CS ≤ VIL, Outputs Open,
VCC = Max., f = fMAX(3)
SA
100
100
—
100
—
100
—
100
LA
65
70
—
65
—
60
—
60
ISB
Standby Power Supply Current
(TTL Level)
CS ≥ VIH, Outputs Open,
VCC = Max., f = fMAX(3)
SA
35
35
—
35
—
35
—
35
LA
20
20
—
20
—
20
—
15
Full Standby Power Supply Current
(CMOS Level)
CS ≥ VHC, VCC = Max.
VIN ≥ VHC or VIN ≤ VLC, f = 0(3)
SA
5
10
—
10
—
10
—
10
LA
0.05
0.9
—
0.9
—
0.9
—
0.9
ISB1
90
Mil.
NOTES:
1. All values are maximum guaranteed values.
2. –55°C to +125°C temperature range only. Also available; 85ns and 100ns Military devices.
3. fMAX = 1/tRC, only address inputs cycling at fMAX. f = 0 means no Address inputs change.
5.2
mA
mA
mA
2981 tbl 07
3
IDT6167SA/LA
CMOS STATIC RAM 16K (16K x 1-BIT)
MILITARY AND COMMERCIAL TEMPERATURE RANGES
DC ELECTRICAL CHARACTERISTICS
VCC = 5.0V ± 10%
IDT6167SA
Symbol
|ILI|
Parameter
Test Condition
Input Leakage Current
|ILO|
Output Leakage Current
Min.
IDT6167LA
Max.
Min.
Max.
VCC = Max.,
MIL
—
10
—
5
VIN = GND to VCC
COM’L
—
5
—
2
VCC = Max., CS = VIH,
MIL
—
10
—
5
VOUT = GND to VCC
COM’L
—
5
—
2
VOL
Output Low Voltage
IOL = 8mA, VCC = Min.
—
0.4
—
0.4
VOH
Output High Voltage
IOH = –4mA, VCC = Min.
2.4
—
2.4
—
Unit
µA
µA
V
V
2981 tbl 08
DATA RETENTION CHARACTERISTICS OVER ALL TEMPERATURE RANGES
(LA Version Only) VLC = 0.2V, VHC = VCC – 0.2V
Typ. (1)
VCC @
Symbol
Parameter
VDR
VCC for Data Retention
ICCDR
Data Retention Current
Test Condition
—
Chip Deselect to Data
Retention Time
tR(3)
Operation Recovery Time
|ILI|
3.0V
2.0V
3.0V
Unit
2.0
—
—
—
—
V
—
0.5
1.0
200
300
µA
COM’L.
—
0.5
1.0
20
30
0
—
—
—
—
ns
tRC(2)
—
—
—
—
ns
—
—
—
2
2
µA
VIN ≥ VHC or ≤ VLC
Input Leakage Current
2.0v
MIL.
CS ≥ VHC
tCDR
(3)
Min.
Max.
VCC @
—
NOTES:
1. TA = +25°C.
2. tRC = Read Cycle Time.
3. This parameter is guaranteed by device characterization, but is not production tested.
2981 tbl 09
LOW VCC DATA RETENTION WAVEFORM
DATA
RETENTION
MODE
VCC
4.5V
VDR ≥ 2V
4.5V
tCDR
CS
tR
VDR
VIH
VIH
2981 drw 03
5.2
4
IDT6167SA/LA
CMOS STATIC RAM 16K (16K x 1-BIT)
MILITARY AND COMMERCIAL TEMPERATURE RANGES
AC TEST CONDITIONS
Input Pulse Levels
GND to 3.0V
Input Rise/Fall Times
5ns
Input Timing Reference Levels
1.5V
Output Reference Levels
1.5V
AC Test Load
See Figures 1 and 2
2981 tbl 10
5V
5V
480Ω
480Ω
DATAOUT
DATAOUT
255Ω
255Ω
30pF*
5pF*
2981 drw 04
2981 drw 05
Figure 2. AC Test Load
(for tCLZ, tCHZ, tWHZ and tOW)
Figure 1. AC Test Load
*Includes scope and jig.
AC ELECTRICAL CHARACTERISTICS (VCC = 5.0V ± 10%, All Temperature Ranges)
6167SA15
6167LA15
Symbol
Parameter
Min.
Max.
6167SA20/25 6167SA35/45(1) 6167SA55(1)/70(1)
6167LA20/25 6167LA35/45(1) 6167LA55(1)/70(1)
Min. Max.
Min.
Max.
Min.
Max.
Unit
Read Cycle
tRC
Read Cycle Time
15
—
20/25
—
35/45
—
55/70
—
ns
tAA
Address Access Time
—
15
—
20/25
—
35/45
—
55/70
ns
tACS
Chip Select Access Time
—
15
—
20/25
—
35/45
—
55/70
ns
(2)
Chip Deselect to Output in Low-Z
3
—
5/5
—
5/5
—
5/5
—
ns
(2)
tCLZ
tCHZ
Chip Select to Output in High-Z
—
10
—
10/10
—
15/30
—
40/40
ns
tOH
Output Hold from Address Change
3
—
5/5
—
5/5
—
5/5
—
ns
tPU(2)
Chip Select to Power-Up Time
0
—
0/0
—
0/0
—
0/0
—
ns
Chip Deselect to Power-Down Time
—
15
—
20/25
—
35/45
—
55/70
ns
tPD
(2)
Write Cycle
tWC
Write Cycle Time
15
—
20/20
—
30/45
—
55/70
—
ns
tCW
Chip Select to End-of-Write
15
—
15/20
—
30/40
—
45/55
—
ns
tAW
Address Valid to End-of-Write
15
—
15/20
—
30/40
—
45/55
—
ns
tAS
Address Set-up Time
0
—
0/0
—
0/0
—
0/0
—
ns
tWP
Write Pulse Width
13
—
15/20
—
30/30
—
35/40
—
ns
tWR
Write Recovery Time
0
—
0/0
—
0/0
—
0/0
—
ns
tDW
Data Valid to End-of-Write
10
—
12/15
—
17/20
—
25/30
—
ns
tDH
Data Hold Time
0
—
0/0
—
0/0
—
0/0
—
ns
tWHZ(2)
Write Enable to Output in High-Z
—
7
—
8/8
—
15/30
—
40/40
ns
tOW(2)
Output Active from End-of-Write
0
—
0/0
—
0/0
—
0/0
—
NOTES:
1. –55°C to +125°C temperature range only. Also available: 85ns and 100ns Military devices.
2. This parameter is guaranteed with AC Load (Figure 2) by device characterization, but is not production tested.
5.2
ns
2981 tbl 11
5
IDT6167SA/LA
CMOS STATIC RAM 16K (16K x 1-BIT)
MILITARY AND COMMERCIAL TEMPERATURE RANGES
TIMING WAVEFORM OF READ CYCLE NO. 1(1, 2)
tRC
ADDRESS
tAA
tOH
PREVIOUS DATAOUT VALID
DATAOUT
DATAOUT VALID
2981 drw 06
TIMING WAVEFORM OF READ CYCLE NO. 2(1, 3)
tRC
CS
tACS
tCLZ
DATAOUT
tCHZ
(4)
(4)
HIGH IMPEDANCE
DATAOUT VALID
tPU
HIGH
IMPEDANCE
tPD
ICC
VCC SUPPLY
CURRENT
ISB
2981 drw 07
NOTES:
1. WE is HIGH for Read cycle.
2. Device is continuously selected, CS is LOW.
3. Address valid prior to or coincedent with CS transition LOW.
4. Transition is measured ±200mV from steady state.
5.2
6
IDT6167SA/LA
CMOS STATIC RAM 16K (16K x 1-BIT)
MILITARY AND COMMERCIAL TEMPERATURE RANGES
TIMING WAVEFORM OF WRITE CYCLE NO. 1, (WE CONTROLLED TIMING)(1, 2, 4)
tWC
ADDRESS
tAW
CS
tAS
tCHZ
(3)
tWR
tWP
(5)
WE
tWHZ
DATAOUT
PREVIOUS DATAOUT VALID
(5)
tOW
(5)
(6)
DATAOUT
VALID (6)
tDW
DATAIN
tDH
DATAIN VALID
2981 drw 08
TIMING WAVEFORM OF WRITE CYCLE NO. 2, (CS CONTROLLED TIMING)(1, 2, 4)
tWC
ADDRESS
tAW
CS
tAS
tWR (3)
tCW
WE
tDW
DATAIN
tDH
DATAIN VALID
2981 drw 09
NOTES:
1. WE or CS must be inactive during all address transitions.
2. A write occurs during the overlap of a LOW CS and a LOW WE.
3. tWR is measured from the earlier of CS or WE going HIGH to the end of the write cycle.
4. If the CS low transition occurs simultaneously with or after the WE LOW transition, the outputs remain in the high-impedance state.
5. Transition is measured ±200mV from steady state.
6. During this period, the I/O pins are in the output state and the input signals must not be applied.
5.2
7
IDT6167SA/LA
CMOS STATIC RAM 16K (16K x 1-BIT)
MILITARY AND COMMERCIAL TEMPERATURE RANGES
ORDERING INFORMATION
IDT
6167
XX
XXX
XX
X
Device
Type
Power
Speed
Package
Process/
Temperature
Range
5.2
Blank
Commercial (0°C to +70°C)
B
Military (–55°C to +125°C)
Compliant to MIL-STD-883, Class B
P
D
Y
300MIL Plastic DIP (P20–1)
300MIL CERDIP (D20–1)
300MIL SOJ (SO20–1)
15
20
25
35
45
55
70
85
100
Military Only
Military Only
Military Only
Military Only
Military Only
SA
LA
Standard Power
Low Power
Speed in nanoseconds
2981 drw 10
8
Similar pages