Aluminum electrolytic capacitors Capacitors with 4-/5-pin snap-in terminals and solder pins Series/Type: B43512, B43522 Date: December 2014 © EPCOS AG 2014. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Capacitors with 4-/5-pin snap-in terminals and solder pins B43512, B43522 Very compact 85 °C Long-life grade capacitors Applications Frequency converters Solar inverters Uninterruptible power supplies Professional power supplies Medical appliances Features Voltage derating (0.90 VR for VR ≤ 450 V) enables 105 °C operation, more details available upon request Diameter 50 mm available Extremely high volumetric efficiency High ripple current capability Many different case sizes Pinning ensures correct insertion RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case, fully insulated with PVC Version with additional PET insulation cap on terminal side available for insulating the capacitor from the PCB (B43512 only) Overload protection by safety vent on the case wall Terminals 4-pin snap-in terminals (6.3 mm and 4.5 mm length) for diameter 35 to 45 mm 5-pin snap-in terminals (6.3 mm and 4.5 mm length) for diameter 50 mm Solder pin mounting on printed circuit boards, pins fit standardized spacings on PCB Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 25 B43512 B43522 B43512, B43522 Very compact 85 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance 385 ... 500 V DC 1.1 VR 220 ... 3300 µF ±20% M Dissipation factor tan δ (20 °C, 120 Hz) for case diameter 35 ... 45 mm: VR ≤ 400 V DC: tan δ ≤ 0.15 VR > 400 V DC: tan δ ≤ 0.20 for case diameter 50 mm: tan δ ≤ 0.20 Leakage current Ileak (5 min, 20 °C) Self-inductance ESL Approx. 20 nH Useful life1) 85 °C; VR; IAC,R > 5000 h Voltage endurance test 85 °C; VR 2000 h Vibration resistance test Characteristics at low temperature Requirements: ∆C/C ≤ 20% of initial value tan δ ≤ 2 times initial specified limit Ileak ≤ initial specified limit Post test requirements: ∆C/C ≤ 10% of initial value tan δ ≤ 1.3 times initial specified limit Ileak ≤ initial specified limit To IEC 60068-2-6, test Fc: Frequency range 10 ... 55 Hz, displacement amplitude 0.35 mm, acceleration max. 5 g, duration 3 × 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 100 Hz VR; d = 35 ... 45 mm ≤ 400 V 420 ... 450 V 500 V VR; d = 50 mm 385 ... 450 V Z -25 °C / Z 20 °C 4 5 7 Z -40 °C / Z 20 °C 7 10 20 IEC climatic category To IEC 60068-1: VR ≤ 450 V DC: 40/085/56 (40 °C/+85 °C/56 days damp heat test) VR > 450 V DC: 25/085/56 (25 °C/+85 °C/56 days damp heat test) The capacitors can be operated in the temperature range of 40 °C to +85 °C but the impedance at 40 °C should be taken into consideration. Detail specification Sectional specification Similar to CECC 30301-805 IEC 60384-4 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 25 B43512, B43522 Very compact 85 °C Dimensional drawings B43512, 4-pin snap-in terminals, PVC insulation Standard snap-in terminals: length (6.3 ±1) mm. Also available with length of (4.5 1) mm. All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings. These pins must be soldered to isolated pads or pads with the same potential as the negative pole. Please read Cautions and warnings and Important notes at the end of this document. Dimensions (mm) d +1 l ±2 35 40 35 45 35 50 35 55 35 60 35 65 35 70 35 75 35 80 35 85 35 90 35 95 40 40 40 45 40 50 40 55 40 60 40 65 40 70 40 75 40 80 40 85 40 90 40 95 45 40 45 45 45 50 45 55 45 60 45 65 45 70 45 75 45 80 45 85 45 90 45 95 45 100 Page 4 of 25 Approx. weight (g) 51 57 63 70 76 82 88 95 101 107 114 120 71 80 89 98 107 116 125 134 143 152 161 170 95 108 120 132 143 155 166 178 190 202 214 226 237 Packing units (pcs.) 60 60 60 36 36 36 36 36 36 36 36 36 33 33 33 33 33 33 33 33 33 33 33 33 28 28 28 28 28 28 28 28 28 28 28 28 28 B43512, B43522 Very compact 85 °C B43512, 4-pin snap-in terminals, PVC insulation and PET insulation cap on terminal side Standard snap-in terminals: length (6.3 +1/1.4) mm. Also available with length of (4.5 1.4) mm. PET insulation cap is positioned under the insulation sleeve. All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings. These pins must be soldered to isolated pads or pads with the same potential as the negative pole. Please read Cautions and warnings and Important notes at the end of this document. Dimensions (mm) d +1.4 l +2.2/2 35 40 35 45 35 50 35 55 35 60 35 65 35 70 35 75 35 80 35 85 35 90 35 95 40 40 40 45 40 50 40 55 40 60 40 65 40 70 40 75 40 80 40 85 40 90 40 95 45 40 45 45 45 50 45 55 45 60 45 65 45 70 45 75 45 80 45 85 45 90 45 95 45 100 Page 5 of 25 Approx. weight (g) 51 57 63 70 76 82 88 95 101 107 114 120 71 80 89 98 107 116 125 134 143 152 161 170 95 108 120 132 143 155 166 178 190 202 214 226 237 Packing units (pcs.) 60 60 60 36 36 36 36 36 36 36 36 36 33 33 33 33 33 33 33 33 33 33 33 33 28 28 28 28 28 28 28 28 28 28 28 28 28 B43512, B43522 Very compact 85 °C B43512, 5-pin snap-in terminals, PVC insulation Dimensions (mm) d +1 l ±2 50 50 50 50 50 50 50 50 50 50 50 40 45 50 55 60 65 70 75 80 90 95 Approx. weight (g) 117 133 148 162 176 190 204 219 234 263 278 Packing units (pcs.) 28 28 28 28 28 28 28 28 28 28 28 Standard snap-in terminals: length (6.3 ±1) mm. Also available with length of (4.5 1) mm. All pin holes must be drilled into the PC-board, since the unconnected pin serves as mounting. This pin must be soldered to an isolated pad or a pad with the same potential as the negative pole. Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 25 B43512, B43522 Very compact 85 °C B43512, 5-pin snap-in terminals, PVC insulation and PET insulation cap on terminal side Dimensions (mm) Approx. d +1 l +2.2/2 weight (g) Packing units (pcs.) 50 50 50 50 50 50 50 50 50 50 50 28 28 28 28 28 28 28 28 28 28 28 40 45 50 55 60 65 70 75 80 90 95 117 133 148 162 176 190 204 219 234 263 278 Standard snap-in terminals: length (6.3 +1/1.4) mm. Also available with length of (4.5 1.4) mm. PET insulation cap is positioned under the insulation sleeve. All pin holes must be drilled into the PC-board, since the unconnected pin serves as mounting. This pin must be soldered to an isolated pad or a pad with the same potential as the negative pole. Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 25 B43512, B43522 Very compact 85 °C B43522, solder pins Pole markings: Plus: +; Minus: All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings. These pins must be soldered to isolated pads or pads with the same potential as the negative pole. Dimensions (mm) d +1 Imax 35 35 35 35 35 35 35 35 35 35 35 35 44 49 54 59 64 69 74 79 84 89 94 99 Approx. weight (g) 51 57 63 70 76 82 88 95 101 107 114 120 Packing units (pcs.) Dimensions (mm) d +1 Imax 60 60 60 36 36 36 36 36 36 36 36 36 40 40 40 40 40 40 40 40 40 40 40 40 Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 25 44 49 54 59 64 69 74 79 84 89 94 99 Approx. weight (g) 71 80 89 98 107 116 125 134 143 152 161 170 Packing units (pcs.) 33 33 33 33 33 33 33 33 33 33 33 33 B43512, B43522 Very compact 85 °C Packing of 4-/5-pin snap-in terminal and solder pin capacitors For ecological reasons the packing is pure cardboard. Ordering codes for terminal styles and insulation features Identification in 3rd block of ordering code 4-/5-pin snap-in terminal capacitors Terminal version Insulation version PVC PVC plus PET cap Standard terminals 6.3 mm M000 M080 Short terminals 4.5 mm M007 M087 Ordering examples: B43512C9188M007 } B43512C9188M080 } 5-pin snap-in capacitor with short terminals and standard PVC insulation 5-pin snap-in capacitor with standard terminals and PVC insulation with additional PET insulation cap on terminal side Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 25 B43512, B43522 Very compact 85 °C Overview of available types VR (V DC) 385 400 420 450 500 Case dimensions d × l (mm) CR (µF) 220 35 × 40 270 35 × 45 330 35 × 50 40 × 40 390 35 × 40 35 × 40 35 × 55 40 × 45 470 35 × 40 35 × 40 35 × 45 35 × 45 40 × 40 35 × 60 40 × 50 45 × 40 560 35 × 45 35 × 45 40 × 40 35 × 50 40 × 40 35 × 55 40 × 45 35 × 70 40 × 55 45 × 45 680 35 × 50 40 × 40 35 × 50 40 × 40 35 × 55 40 × 45 35 × 60 40 × 50 45 × 40 35 × 80 40 × 65 45 × 50 820 35 × 55 40 × 45 35 × 60 40 × 50 45 × 40 35 × 65 40 × 50 45 × 40 35 × 70 40 × 55 45 × 45 35 × 95 40 × 75 45 × 60 1000 35 × 65 40 × 50 45 × 40 35 × 70 40 × 55 45 × 45 50 × 40 35 × 75 40 × 60 45 × 45 35 × 80 40 × 65 45 × 50 40 × 85 45 × 70 1200 35 × 75 40 × 60 45 × 45 35 × 80 40 × 60 45 × 50 50 × 45 35 × 85 40 × 70 45 × 55 50 × 50 35 × 95 40 × 75 45 × 60 50 × 55 45 × 80 1500 35 × 90 40 × 70 45 × 55 50 × 50 35 × 95 40 × 75 45 × 55 40 × 80 45 × 65 50 × 60 40 × 90 45 × 70 50 × 65 45 × 100 1800 40 × 80 45 × 60 40 × 85 45 × 65 50 × 60 40 × 95 45 × 70 45 × 80 50 × 75 Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 25 B43512, B43522 Very compact 85 °C VR (V DC) 385 400 420 450 45 × 95 50 × 90 500 Case dimensions d × l (mm) CR (µF) 2200 40 × 95 45 × 75 50 × 65 45 × 80 50 × 70 45 × 85 50 × 80 2700 45 × 85 50 × 80 45 × 90 50 × 80 50 × 95 3300 50 × 95 50 × 95 The capacitance and voltage ratings listed above are available in different cases upon request. Other voltage and capacitance ratings are also available upon request. Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 25 B43512, B43522 Very compact 85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 385 V DC 470 35 × 560 35 × 680 35 × 680 40 × 820 35 × 820 40 × 1000 35 × 1000 40 × 1000 45 × 1200 35 × 1200 40 × 1200 45 × 1500 35 × 1500 40 × 1500 45 × 1500 50 × 1800 40 × 1800 45 × 2200 40 × 2200 45 × 2200 50 × 2700 45 × 2700 50 × 3300 50 × 40 45 50 40 55 45 65 50 40 75 60 45 90 70 55 50 80 60 95 75 65 85 80 95 ESRtyp 100 Hz 20 °C mΩ 170 140 120 120 100 100 80 85 85 70 70 75 55 55 60 90 45 50 40 40 65 34 50 40 ESRtyp 300 Hz 60 °C mΩ 50 45 36 40 32 34 26 30 32 22 24 28 17 19 22 32 16 19 14 15 22 13 18 14 Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 250 210 170 180 150 150 120 130 130 100 110 110 80 85 90 150 70 75 60 60 110 50 85 70 5.00 5.62 6.41 6.34 7.29 7.16 8.44 8.14 7.87 9.68 9.32 8.84 11.5 10.9 10.3 10.1 12.4 11.6 14.5 13.6 12.9 15.6 15.1 17.4 2.84 3.19 3.64 3.59 4.13 4.06 4.79 4.61 4.45 5.50 5.29 5.01 6.54 6.19 5.88 5.53 7.06 6.57 8.25 7.72 7.07 8.87 8.28 9.55 B435*2A3477M0## B435*2A3567M0## B435*2A3687M0## B435*2B3687M0## B435*2A3827M0## B435*2B3827M0## B435*2A3108M0## B435*2B3108M0## B43512C3108M0## B435*2A3128M0## B435*2B3128M0## B43512C3128M0## B435*2A3158M0## B435*2B3158M0## B43512C3158M0## B43512D3158M0## B435*2A3188M0## B43512B3188M0## B435*2A3228M0## B43512B3228M0## B43512C3228M0## B43512A3278M0## B43512B3278M0## B43512A3338M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-/5-pin snap-in standard terminals and PVC insulation 07 = 4-/5-pin snap-in short terminals and PVC insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 12 of 25 B43512, B43522 Very compact 85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 400 V DC 470 35 × 560 35 × 560 40 × 680 35 × 680 40 × 820 35 × 820 40 × 820 45 × 1000 35 × 1000 40 × 1000 45 × 1000 50 × 1200 35 × 1200 40 × 1200 45 × 1200 50 × 1500 35 × 1500 40 × 1500 45 × 1800 40 × 1800 45 × 1800 50 × 40 45 40 50 40 60 50 40 70 55 45 40 80 60 50 45 95 75 55 85 65 60 ESRtyp 100 Hz 20 °C mΩ 180 150 150 120 130 100 100 110 85 85 90 130 70 70 75 110 55 55 60 50 50 75 ESRtyp 300 Hz 60 °C mΩ 55 45 45 38 40 32 34 36 26 28 30 45 22 24 26 36 17 19 22 16 19 26 Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 260 220 220 180 190 150 150 160 130 130 130 210 110 110 110 180 85 85 90 75 75 120 5.03 5.66 5.74 6.46 6.36 7.41 7.33 7.22 8.57 8.32 8.17 8.03 9.84 9.39 9.14 8.99 11.7 11.1 10.4 12.7 11.9 11.7 2.85 3.21 3.26 3.66 3.61 4.21 4.16 4.10 4.87 4.72 4.63 4.38 5.59 5.32 5.19 4.91 6.65 6.31 5.91 7.21 6.76 6.39 B435*2A9477M0## B435*2A9567M0## B435*2B9567M0## B435*2A9687M0## B435*2B9687M0## B435*2A9827M0## B435*2B9827M0## B43512C9827M0## B435*2A9108M0## B435*2B9108M0## B43512C9108M0## B43512D9108M0## B435*2A9128M0## B435*2B9128M0## B43512C9128M0## B43512D9128M0## B435*2A9158M0## B435*2B9158M0## B43512C9158M0## B435*2A9188M0## B43512B9188M0## B43512C9188M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-/5-pin snap-in standard terminals and PVC insulation 07 = 4-/5-pin snap-in short terminals and PVC insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 13 of 25 B43512, B43522 Very compact 85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 400 V DC 2200 45 × 2200 50 × 2700 45 × 2700 50 × 3300 50 × VR = 420 V DC 390 35 × 470 35 × 560 35 × 560 40 × 680 35 × 680 40 × 820 35 × 820 40 × 820 45 × 1000 35 × 1000 40 × 1000 45 × 1200 35 × 1200 40 × 1200 45 × 1200 50 × ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 13.9 13.4 16.0 15.2 17.6 7.90 7.32 9.08 8.36 9.67 B43512A9228M0## B43512B9228M0## B43512A9278M0## B43512B9278M0## B43512A9338M0## 2.44 2.77 3.12 3.12 3.57 3.54 4.10 4.00 3.93 4.75 4.62 4.45 5.46 5.27 5.11 5.15 B435*2A0397M0## B435*2A0477M0## B435*2A0567M0## B435*2B0567M0## B435*2A0687M0## B435*2B0687M0## B435*2A0827M0## B435*2B0827M0## B43512C0827M0## B435*2A0108M0## B435*2B0108M0## B43512C0108M0## B435*2A0128M0## B435*2B0128M0## B43512C0128M0## B43512D0128M0## 80 70 90 80 95 40 60 34 50 40 15 22 13 18 14 65 100 55 80 70 40 45 50 40 55 45 65 50 40 75 60 45 85 70 55 50 320 260 220 220 180 180 150 150 160 120 130 130 100 100 110 110 80 65 55 60 45 50 40 40 45 32 34 38 28 30 32 36 500 410 350 350 290 290 240 250 250 200 200 210 170 170 170 180 4.35 4.93 5.55 5.56 6.35 6.31 7.29 7.14 7.01 8.45 8.23 7.95 9.72 9.38 9.11 9.43 Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-/5-pin snap-in standard terminals and PVC insulation 07 = 4-/5-pin snap-in short terminals and PVC insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 14 of 25 B43512, B43522 Very compact 85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 420 V DC 1500 40 × 1500 45 × 1500 50 × 1800 40 × 1800 45 × 2200 45 × 2200 50 × 2700 50 × VR = 450 V DC 390 35 × 470 35 × 470 40 × 560 35 × 560 40 × 680 35 × 680 40 × 680 45 × 820 35 × 820 40 × 820 45 × 1000 35 × 1000 40 × 1000 45 × ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 11.0 10.6 10.9 12.6 11.9 13.8 14.2 16.4 6.18 5.96 6.01 7.12 6.69 7.80 7.79 9.02 B435*2A0158M0## B43512B0158M0## B43512C0158M0## B435*2A0188M0## B43512B0188M0## B43512A0228M0## B43512B0228M0## B43512A0278M0## 2.53 2.87 2.91 3.27 3.27 3.74 3.71 3.67 4.31 4.20 4.14 5.01 4.84 4.68 B435*2A5397M0## B435*2A5477M0## B435*2B5477M0## B435*2A5567M0## B435*2B5567M0## B435*2A5687M0## B435*2B5687M0## B43512C5687M0## B435*2A5827M0## B435*2B5827M0## B43512C5827M0## B435*2A5108M0## B435*2B5108M0## B43512C5108M0## 80 65 60 95 70 85 80 95 85 85 90 70 75 60 60 50 24 26 28 20 22 18 20 16 140 140 150 120 120 95 100 80 40 45 40 55 45 60 50 40 70 55 45 80 65 50 290 240 240 200 200 160 170 170 140 140 140 110 110 120 75 60 65 50 55 45 45 50 36 38 40 30 32 36 440 370 370 310 310 260 260 270 210 220 220 180 180 190 4.46 5.06 5.13 5.75 5.75 6.59 6.53 6.47 7.58 7.40 7.30 8.82 8.53 8.26 Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-/5-pin snap-in standard terminals and PVC insulation 07 = 4-/5-pin snap-in short terminals and PVC insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 15 of 25 B43512, B43522 Very compact 85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 450 V DC 1200 35 × 1200 40 × 1200 45 × 1200 50 × 1500 40 × 1500 45 × 1500 50 × 1800 45 × 1800 50 × 2200 45 × 2200 50 × VR = 500 V DC 220 35 × 270 35 × 330 35 × 330 40 × 390 35 × 390 40 × 470 35 × 470 40 × 470 45 × 560 35 × 560 40 × 560 45 × ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 95 75 60 55 90 70 65 80 75 95 90 95 95 95 100 75 80 80 65 70 55 55 26 28 30 32 22 24 26 20 22 17 18 150 150 160 160 120 130 130 110 110 85 90 10.1 9.74 9.45 9.89 11.5 11.0 11.4 12.5 13.0 14.5 15.0 5.79 5.53 5.36 5.40 6.56 6.25 6.27 7.12 7.11 8.28 8.23 B435*2A5128M0## B435*2B5128M0## B43512C5128M0## B43512D5128M0## B435*2A5158M0## B43512B5158M0## B43512C5158M0## B43512A5188M0## B43512B5188M0## B43512A5228M0## B43512B5228M0## 40 45 50 40 55 45 60 50 40 70 55 45 540 440 360 360 310 310 260 260 260 210 220 220 120 100 80 85 70 70 55 60 60 50 50 50 850 700 570 570 480 490 400 410 410 340 340 350 3.20 3.67 4.20 4.27 4.71 4.76 5.38 5.39 5.41 6.13 6.07 6.07 1.27 1.45 1.66 1.69 1.87 1.89 2.13 2.13 2.14 2.43 2.40 2.40 B435*2A6227M0## B435*2A6277M0## B435*2A6337M0## B435*2B6337M0## B435*2A6397M0## B435*2B6397M0## B435*2A6477M0## B435*2B6477M0## B43512C6477M0## B435*2A6567M0## B435*2B6567M0## B43512C6567M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-/5-pin snap-in standard terminals and PVC insulation 07 = 4-/5-pin snap-in short terminals and PVC insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 16 of 25 B43512, B43522 Very compact 85 °C Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d×l mm VR = 500 V DC 680 35 × 80 680 40 × 65 680 45 × 50 820 35 × 95 820 40 × 75 820 45 × 60 1000 40 × 85 1000 45 × 70 1200 45 × 80 1500 45 × 100 ESRtyp 100 Hz 20 °C mΩ 180 180 180 150 150 150 120 120 100 80 ESRtyp 300 Hz 60 °C mΩ 40 40 45 34 34 36 28 30 26 20 Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 280 280 290 230 240 240 200 200 170 130 7.10 6.96 6.88 8.23 7.97 7.86 9.24 9.03 10.2 12.1 2.81 2.76 2.72 3.26 3.16 3.11 3.66 3.58 4.08 4.83 B435*2A6687M0## B435*2B6687M0## B43512C6687M0## B435*2A6827M0## B435*2B6827M0## B43512C6827M0## B435*2A6108M0## B43512B6108M0## B43512A6128M0## B43512A6158M0## Capacitors with solder pins are only available in 35 and 40 mm case diameters. Capacitors with 50 mm case diameter are only available with 5-pin snap-in terminals. Composition of ordering code * = Terminal type 1 = 4-/5-pin snap-in terminals 2 = solder pin Please read Cautions and warnings and Important notes at the end of this document. ## = Terminal style and insulation feature 00 = solder pin or 4-/5-pin snap-in standard terminals and PVC insulation 07 = 4-/5-pin snap-in short terminals and PVC insulation 80 = 4-/5-pin snap-in standard terminals and PVC insulation with additional PET insulation cap on terminal side 87 = 4-/5-pin snap-in short terminals and PVC insulation with additional PET insulation cap on terminal side Page 17 of 25 B43512, B43522 Very compact 85 °C Useful life1) For useful life calculations, please use our web-based "AlCap Useful Life Calculation Tool", which can be found on the Internet under the following link http://www.epcos.com/designtools/alu_useful_life/Useful_life.swf. The AlCap Useful Life Calculation Tool provides calculations of useful life as well as additional data for selected capacitor types under operating conditions defined by the user. Frequency characteristic of ESR Typical behavior Impedance Z versus frequency f Typical behavior at 20 °C 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 25 B43512, B43522 Very compact 85 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. However, the amount of dangerous materials used in our products is limited to an absolute minimum. Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 25 B43512, B43522 Very compact 85 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Polarity Reverse voltage Mounting position of screwterminal capacitors Robustness of terminals Mounting of single-ended capacitors Soldering Soldering, cleaning agents Upper category temperature Passive flammability Safety information Reference chapter "General technical information" Make sure that polar capacitors are connected 1 with the right polarity. "Basic construction of aluminum electrolytic capacitors" Voltages of opposite polarity should be prevented 3.1.6 by connecting a diode. "Reverse voltage" Screw terminal capacitors must not be mounted 11.1. with terminals facing down unless otherwise "Mounting positions of specified. capacitors with screw terminals" The following maximum tightening torques must 11.3 not be exceeded when connecting screw "Mounting torques" terminals: M5: 2.5 Nm M6: 4.0 Nm The internal structure of single-ended capacitors 11.4 might be damaged if excessive force is applied to "Mounting the lead wires. considerations for Avoid any compressive, tensile or flexural stress. single-ended capacitors" Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. Do not exceed the specified time or temperature 11.5 limits during soldering. "Soldering" Do not allow halogenated hydrocarbons to come 11.6 into contact with aluminum electrolytic capacitors. "Cleaning agents" Do not exceed the upper category temperature. 7.2 "Maximum permissible operating temperature" Avoid external energy, e.g. fire. 8.1 "Passive flammability" Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 25 B43512, B43522 Very compact 85 °C Topic Safety information Active flammability Maintenance Avoid overload of the capacitors. Storage Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. Do not apply excessive mechanical stress to the capacitor terminals when mounting. Do not store capacitors at high temperatures or high humidity. Capacitors should be stored at +5 to +35 °C and a relative humidity of ≤ 75%. Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves Reference chapter "General technical information" 8.2 "Active flammability" 10 "Maintenance" 7.3 "Shelf life and storage conditions" Reference chapter "Capacitors with screw terminals" "Screw terminals accessories" Display of ordering codes for EPCOS products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of EPCOS, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 25 B43512, B43522 Very compact 85 °C Symbols and terms Symbol English German C CR CS CS,T Cf d dmax ESL ESR ESRf Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current (ripple current) Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Leakage current Operating leakage current Case length, nominal dimension Maximum case length (without terminals and mounting stud) Resistance Insulation resistance Balancing resistance Temperature Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life (operating hours) Kapazität Nennkapazität Serienkapazität Serienkapazität bei Temperatur T Kapazität bei Frequenz f Gehäusedurchmesser, Nennmaß Maximaler Gehäusedurchmesser Eigeninduktivität Ersatzserienwiderstand Ersatzserienwiderstand bei Frequenz f ESRT f I IAC IAC,RMS IAC,f IAC,max IAC,R Ileak Ileak,op l lmax R Rins Rsymm T ∆T TA TC TB t ∆t tb Please read Cautions and warnings and Important notes at the end of this document. Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulässiger Wechselstrom Nennwechselstrom Reststrom Betriebsreststrom Gehäuselänge, Nennmaß Maximale Gehäuselänge (ohne Anschlüsse und Gewindebolzen) Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehäusetemperatur Temperatur des Gehäusebodens Zeit Zeitraum Brauchbarkeitsdauer (Betriebszeit) Page 22 of 25 B43512, B43522 Very compact 85 °C Symbol V VF Vop VR VS XC XL Z ZT tan δ λ ε0 εr ω English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity; 2 π f German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitätszahl Kreisfrequenz; 2 π f Note All dimensions are given in mm. Please read Cautions and warnings and Important notes at the end of this document. Page 23 of 25 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). Page 24 of 25 Important notes 7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.vvv Page 25 of 25