Spec Sheet PrintPDF FBAR/SAW Devices (SAW Duplexers) D5DA876M5K2P6 Features Item Summary SAW, Duplexer, 1.8x1.4x0.6mm Band26 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping Embossed 3000 , 15000pcs Products characteristics table External Dimensions LTE Dimension L 1.8 + 0/- 0.20 mm Type SAW Dimension W 1.4 + 0/- 0.20 mm Function Duplexer Dimension T Max 0.6 mm band Band26 Insertion Loss (typ) 1.3/2.0 dB System (Tx-ANT/ANT-Rx) Isolation (typ) 60/57 dB Operating Temp. Range -20 to +85 ℃ RoHS2 Compliance (10 subst.) Yes REACH Compliance (168 subst.) Yes Soldering Reflow 2016.11.21 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 26 Duplexer Date Part Number D5DA876M5K2P6 Version 2.2fhD Mar. 22, 2016 Final Table 1-1. Electrical Specification Item (MHz) Unit Typ Max 815~845 - 1.3 2.2 dB(*1) 814.24~815 - 1.4 2.4 dB(*1) 845~848.76 - 1.9 2.9 dB(*1) 814.24~848.76 - 1.2 2.2 dB Tx 814.24~848.76 - 1.6 2.0 - Ant 814.24~848.76 - 1.5 2.0 - 29dBm,50 oC,5000h,CW - Insertion loss Ant Amplitude Ripple VSWR (Ver.2.2fhD) Min Tx to Specification Condition Input Power 814.24~848.76 Absolute 10~494 35 41 - dB attenuation 494~804 32 37 - dB 859.24~893.76 44 56 - dB 1475.9~1698 35 40 - dB 1710~2494 30 35 - dB 3256~4245 20 27 - dB 4884~6000 35 44 - dB 6512~6792 15 28 - dB 7326~7641 12 26 - dB (*1) Specification of insertion loss excludes loss that comes from the test board. Remarks Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 26 Duplexer Date Part Number D5DA876M5K2P6 Version 2.2fhD Mar. 22, 2016 Final Table 1-2. Electrical Specification Item (MHz) Unit Typ Max 859.24~893.76 - 2.0 3.1 dB(*1) 859.24~893.76 - 1.0 2.2 dB Ant 859.24~893.76 - 1.8 2.2 - Rx 859.24~893.76 - 1.8 2.2 1~447 50 75 - dB 814.24~848.76 45 55 - dB 909~979 10 22 - dB 1427~2500 45 50 - dB 2577~6000 38 47 - dB 6013~6258 20 44 - dB 814.24~848.76 55 60 - dB 859.24~893.76 52 57 - dB Insertion loss to Amplitude Rx Ripple Absolute attenuation Tx (Ver.2.2fhD) Min Ant VSWR Specification Condition Isolation To Rx Terminating Impedance Tx port 50 + 5.1nH Ω Rx port 50 Ω Ant port 50 // 8.2nH Ω -20 to +85 oC 1.8 x 1.4 x 0.60 mm Operating Temperature Device size (L typ. x W typ. x H max.) (*1) Specification of insertion loss excludes loss that comes from the test board. Remarks Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 26 Duplexer Date Part Number D5DA876M5K2P6 Version 2.2fhD Mar. 22, 2016 Final Dimensions 0.6ｍax < Top View > < Side View > < Bottom View > Unit : mm Pin assignment Pin No. Pin name Description 1 Rx Receiver 2 GND Ground 3 Tx Transmitter 4 GND Ground 5 GND Ground 6 Ant Antenna 7 GND Ground 8 GND Ground Figure 1. Dimensions and Pin assignment Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 26 Duplexer Date Part Number D5DA876M5K2P6 Version 2.2fhD Mar. 22, 2016 Final Evaluation Circuit 1-8:Pin No. Recommended foot print pattern Common GND Common GND External appearance in Chip carrier External appearance in Chip carrier :Pad pattern :Resist pattern Figure 2. Recommended foot print pattern Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 26 Duplexer Date Part Number D5DA876M5K2P6 Version 2.2fhD Tx to Ant Ant to Rx Figure 3-1. Electrical Characteristics These data exclude loss that comes from the test board. Mar. 22, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 26 Duplexer Date Part Number D5DA876M5K2P6 Version 2.2fhD Tx to Ant, Ant to Rx Tx to Rx Isolation Figure 3-2. Electrical Characteristics These data exclude loss that comes from the test board Mar. 22, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 26 Duplexer Date Part Number D5DA876M5K2P6 Version 2.2fhD Tx Port Figure 3-4. Electrical Characteristics Mar. 22, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 26 Duplexer Date Part Number D5DA876M5K2P6 Version 2.2fhD Rx Port Figure 3-5. Electrical Characteristics Mar. 22, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 26 Duplexer Date Part Number D5DA876M5K2P6 Version 2.2fhD Ant Port Figure 3-6. Electrical Characteristics Mar. 22, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 26 Duplexer Date Part Number D5DA876M5K2P6 Version 2.2fhD Tx to Ant (Wide Span) Ant to Rx (Wide Span) Figure 3-7. Electrical Characteristics Mar. 22, 2016 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 26 Duplexer Date Part Number D5DA876M5K2P6 Version 2.2fhD Mar. 22, 2016 Final Ordering Code Ordering Code Packing Reel size Status D5DA876M5K2P6-Z Tape & Reel 3,000 pcs. MP D5DA876M5K2P6-ZA Tape & Reel less than 3,000 pcs. MP D5DA876M5K2P6-Y Tape & Reel 15,000 pcs. MP D5DA876M5K2P6-YA Tape & Reel less than 15,000 pcs. MP D5DA876M5K2P6-Q Bulk few pcs. MP *Minimum order quantity (MOQ) is assigned for each inquiry, Please contact to Sales Representatives.. *MP : Mass Production Notice All of the contents specified herein are subject to change without notice due to technical improvements, etc. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. This product is for general electronics equipment such as Audio-Visual equipment, household electronics, office supplies, information services and telecommunications; therefore, in case this product is used for any medical equipment, space equipment, nuclear equipment or disaster prevention equipment, please contact Taiyo Yuden in advance. In case this product is used for general electronics equipment or circuits which require high safety and high reliability, thoroughly evaluate on safety and add a protection circuit if necessary.