GBJ5005 THRU GBJ5010 GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER 50 to 1000 VOLTS 50.0 AMPERE REVERSE VOLTAGE: FORWARD CURRENT: FEATURES GBJ · Glass passivated chip junction · Reliable low cost construction utilizing molded plastic technique · Ideal for printed circuit board · Low forward voltage drop · Low reverse leakage current · High surge current capability MECHANICAL DATA Case: Molded plastic, GBJ Epoxy: UL 94V-O rate flame retardant Terminals: Leads solderable per MIL-STD-202, method 208 guaranteed Dimensions in inches and (millimeters) Mounting position: Any Weight: 0.23ounce, 6.6gram Maximum Ratings and Electrical Characteristics Ratings at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60H Z, resistive or inductive load. For capacitive load, derate current by 20%. Symbols GBJ5005 GBJ5001 Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Voltage VRMS Maximum DC Blocking Voltage VDC Maximum Average Forward Rectified Current with Heatsink at TC=100℃ GBJ5002 GBJ5004 GBJ5006 GBJ5008 GBJ5010 Units 1000 Volts 100 200 400 600 800 35 70 140 280 420 560 700 Volts 50 100 200 400 600 800 1000 Volts I(AV) 50.0 Amp IFSM 400 Amp VF 1.1 Volts Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage Drop per Element at 12.5A DC and 25℃ Maximum Reverse Current at TA=25℃ at Rated DC Blocking Voltage T A=125℃ Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range IR CJ 10.0 500 85 pF RθJC 0.6 ℃/W TJ，Tstg -55 to +150 ℃ NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance fromn Junction to Case with Device Mounted on 300mm x 300mm x 1.6mmCu Plate Heatsink. www.yfwdiode.com uAmp GBJ5005 THRU GBJ5010 GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER RATINGS AND CHARACTERISTIC CURVES www.yfwdiode.com