GKT-VL Aluminum Electrolytic Capacitor–SMD FEATURES u Wide temperature range -55~+105℃. u Load life of 3000~5000 hours. u Comply with the RoHS directive.. SPECIFICATIONS OPERATING TEMPERATURE -55℃ ~+105℃ Voltage Range 6.3V~100V.DC Capacitance Range 0.1 ~ 1500μF Capacitance Tolerance ±20% at 120Hz, 20℃ Leakage Current Dissipation Factor (Tan δ) Stability At Low Temp. Leakage current (Φ4~Φ10) ≤0.01CV or 3μA, whichever is greater (After 2 minutes application of rated voltage) Leakage current (Φ12.5~Φ16) ≤0.03CV or 4μA, whichever is greater (After 1 minutes application of rated voltage) Measurement Frequency: 120Hz, Temperature: 20℃ Rated Voltage (V) 6.3 10 16 Φ4~Φ10 0.28 0.24 0.20 Tan δ (Max.) 0.38 0.34 Φ12.5~Φ16 0.30 Measurement Frequency: 120Hz Rated Voltage (V) 6.3 Z(-25℃)/ Z(20℃) 3 Impedance Φ4~Φ10 Z(-55℃)/ Z(20℃) 8 Ratio Z(-25℃)/ Z(20℃) 5 ZT/Z20 Φ12.5~Φ16 (Max.) Z(-55℃)/ Z(20℃) 12 25 35 50 0.16 0.13 0.12 0.26 0.22 0.18 10 16 25 35 50 3 2 2 2 2 5 4 3 3 3 4 10 3 8 2 5 2 4 2 3 Load Life After 5000 hrs. (3000 hrs. for Φ4~Φ6.3*5.4&Φ8*6.2) application of the rated voltage at 105℃, They meet the characteristics listed below. Capacitance Change Within ±30% of initial value Dissipation Factor 300% or less of initial specified value Leakage Current Initial specified value or less Shelf Life After leaving capacitors under no load at 105℃for 1000 hours, They meet the specified value for life characteristics listed above.. Resistance to Soldering Heat After reflow soldering and restored at room temperature, they meet the characteristics listed at right. Capacitance Change Within ± 10% of initial value Dissipation Factor Initial specified value or less Leakage Current Initial specified value or less DRAWING (Unit: mm) *1 Voltage mark for 6.3V is [6V] *3 Applicable toΦ8*10.5~Φ10 *2 Applicable toΦ6.3*7.7 *4 Applicable toΦ12.5~Φ16. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 GKT-VL Aluminum Electrolytic Capacitor–SMD DIMENSIONS(Unit: mm) ØD×L 4×5.4 5×5.8 6.3×5.4 6.3×7.7 8×6.2 8×10.5 10×10.5 10×13.5 12.5×13.5/16 16×16.5 A 2.0 2.2 2.6 2.6 3.4 3.0 3.3 3.3 4.9 5.8 B 4.3 5.3 6.6 6.6 8.4 8.4 10.4 10.4 13.0 17.0 C 4.3 5.3 6.6 6.6 8.4 8.4 10.4 10.4 13.0 17.0 E±0.2 1.0 1.4 1.9 1.9 2.3 3.1 4.7 4.7 4.7 6.4 L 5.8 5.8 5.8 7.7 6.2 10.5 10.5 13.5 13.5/16 16.5 DIMENSIONS&MAXIMUM PERMISSIBLE RIPPLE CURRENT WV Cap. (μF) 6.3 10 16 25 0J 1A 1C 1E 10 100 22 220 4×5.4 22 5×5.8 33 330 5×5.8 35 47 470 5×5.8 38 100 150 220 101 6.3×5.4 4×5.4 18 5×5.8 27 30 5×5.8 30 6.3×5.4 44 5×5.8 36 6.3×5.4 48 6.3×5.4 50 6.3×7.7 63 6.3×5.4 50 6.3×5.4 50 (8×6.2) (63_ 8×10.5 116 6.3×7.7 81 6.3×7.7 81 (8×6.2) (81) (8×6.2) (81) 8×10.5 125 8×10.5 125 10×10.5 320 8×10.5 141 10×10.5 216 10×10.5 320 10×10.5 320 12.5×13.5 400 (10×13.5) (350) 69 6.3×7.7 85 (8×6.2) (85) 6.3×7.7 120 (8×6.2) (120) 151 221 330 331 8×10.5 290 10×10.5 290 10×10.5 290 470 471 10×10.5 320 10×10.5 320 10×10.5 320 680 681 10×10.5 320 10×10.5 320 10×13.5 420 12.5×13.5 415 1000 102 10×10.5 410 10×13.5 390 12.5×13.5 550 12.5×13.5 460 1500 152 10×13.5 450 12.5×13.5 480 12.5×13.5 650 12.5×16 700 12.5×16 750 2200 222 12.5×13.5 680 16×16.5 800 (12.5×13.5) (510) 16×16.5 800 12.5×16 3300 850 332 (12.5×13.5) Ripple Case Size Current (800) . Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2 GKT-VL Aluminum Electrolytic Capacitor–SMD DIMENSIONS&MAXIMUM PERMISSIBLE RIPPLE CURRENT WV 35 Cap. (μF) 50 1V 1H 0.1 0R1 4×5.4 1.0 0.22 R22 4×5.4 2.6 0.33 R33 4×5.4 3.2 0.47 R47 4×5.4 5 1 010 4×5.4 8 2.2 2R2 4×5.4 12 3.3 3R3 4×5.4 17 4.7 4R7 4×5.4 16 5×5.8 22 10 100 5×5.8 27 6.3×5.4 32 22 220 33 6.3×5.4 6.3×7.7 57 (8×6.2) (57) 47 470 8×10.5 92 100 101 10×10.5 151 150 151 10×10.5 290 220 221 10×10.5 375 330 100 1J 2A 70 10×10.5 80 80 10×10.5 310 10×10.5 90 (10×13.5) (320) 55 10×10.5 10×10.5 340 8×10.5 65 140 12.5×13.5 50 8×10.5 8×10.5 310 (30) 8×10.5 (45) (58) 10×10.5 (8×6.2) (8×6.2) (8×6.2) 310 30 45 58 10×10.5 6.3×7.7 6.3×7.7 6.3×7.7 44 330 63 10×13.5 150 12.5×13.5 12.5×13.5 250 (10×13.5) (150) 12.5×13.5 300 16×16.5 600 Case Size Ripple Current 470 12.5×13.5 380 12.5×16 600 16×16.5 650 (10×13.5) (375) (12.5×13.5) (500) (12.5×16) (550) 16×16.5 700 331 470 471 12.5×13.5 520 680 681 12.5×13.5 550 16×16.5 750 (12.5×16) (600) 1000 102 FREQUENCY COEFFICIENT OF ALLOWABLE RIPPLE CURRENT 50Hz Frequency Ø 4~ Ø 10 Coefficient Ø 12.5~ Ø 16 120Hz 300Hz 1KHz 10KHz~ 0.70 1.00 1.17 1.36 1.50 ~68μF 0.75 1.00 1.35 1.57 2.00 100~470μF 0.80 1.00 1.23 1.34 1.50 680~3300μF 0.85 1.00 1.10 1.13 1.15 Please visit our website to get more update data, those data & specification are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 3 GKT-VL Aluminum Electrolytic Capacitor–SMD HOW TO ORDER GKT | VL | 0J | M | 220 | 040054 | T | R | Series Sub Series Voltage Capacitance Tolerance 2. Capacitance Case Size Packing Pb 3. 4. 5. 6. 1. NOTE: 1. Rated Voltage Code 0G Voltage 4 0J 1A 1C 1E 1V 1H 1J 2A 6.3 10 16 25 35 50 63 100 2. Capacitance Tolerance Code K M Q T ±20% +30-10% +50-10% Tolerance ±10% 3. Capacitance Code 0R1 R47 010 4R7 100 470 101 471 102 472 103 0.1 0.47 1 4.7 10 47 100 470 1000 4700 10000 Capacitance (µF) 4. Case Size Code Case Size (mm) 5. Packing Code Packing 6. Pb Code Pb 040054 050054 063054 080105 100105 125135 160215 4x5.4 5x5.4 6.3x5.4 8x10.5 10x10.5 12.5x13.5 16x21.5 T Tape & Reel R RoHS Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 4