AEC DG5N High sensitivity 200mw coil Datasheet

DG5N
miniature pcb power relay
• miniature - only 20.5 x 7 x 15mm
• High switching capacity 140W, 1250VA
• High sensitivity 200mW coils
• Cadmium free contacts
• RoHS Compliant
E305753
Contacts
Contact number & arrangement
SPST-NO (1 Form A)
Contact material
AgSnO2
Max. switching voltage
Rated load (resistive - cos φ=1)
AC/DC 250VAC, 28VDC
AC1 5A/250VAC
DC1 5A/28VDC
Max. switching power
1250VA / 140W
Contact Resistance (Initial)
≤ 50mΩ at 6VDC/1A
Coil
Rated voltage
DC 3...48V (3V coil not UL approved)
Must release voltage
≥0.10Un
Operating range of supply voltage
See coil table 1
Rated power consumption
DC 200mW
Insulation
Insulation resistance
Tracking resistance
Dielectric strength
≥100MΩ at 500VDC, 50%RH
CTI 250
coil to contact 4,000Vrms, 1min (50/60Hz); 10,000V surge
contact to contact 1,000Vrms, 1min (50/60Hz)
General Data
Operating time (typical)
ms ≤ 10
Release time (typical)
ms ≤ 5
Max Switch Rate (On/Off)
electrical 30 operations / minute
mechanical 300 operations / minute
Electrical Life
ops 1 x 105 (resistive 5A/250VAC)
Mechanical life
ops 1 x 107 (no load)
Dimensions
Weight
L x W x H 20.5 x 7.0 x 15mm
≤ 4g
Ambient temperature
storage -30 to 85°C
operating -30 to 85°C
Flammability Class
UL 94V-0
Humidity range
45~85% RH
Shock resistance
Functional: 98.1m/s2 (10g) / Destructive: 981m/s2 6ms (100g)
Vibration resistance
10-55Hz DA. 1.5mm
Specifications are subject to change without notice. E&OE.
Page 1 of 2
Ref: DG5N 090514JHM
www.durakoolrelays.com
Sales Department Tel: (888) 847-6552
DG5N
miniature pcb power relay
Coil Data (at 20°C)
Table 1
Coil Resistance
(Ω) ±10%
Nominal
Current (mA)
Must Operate
Voltage max.
(VDC)
Must Release
Voltage min.
(VDC)
Max. Allowable
Voltage (VDC)
3
45
66.7
2.25
0.3
3.9
5
125
40.0
3.75
0.5
6.5
6
180
33.7
4.50
0.6
7.8
1009
9
405
22.2
6.75
0.9
11.7
1012
12
720
16.7
9.00
1.2
15.6
1024
24
2880
8.3
18.0
2.4
31.2
Coil Voltage Code
Nominal Voltage
(VDC)
1003
1005
1006
Notes:
1) Operating the relay coil below the nominal voltage may compromise the current ratings for the contacts.
2) 3VDC Coil not UL approved.
Ordering codes
Contact Material
Type
D
G
5
N
-
3
Contact
arrangement
0
2
1
Cover protection
and mounting
-
3
5
Coil code
-
Contact material
30
-
see Table 1
AgSnO2
Contact arrangement
21
-
SPST-NO (1N/O)
Cover protection category
3
-
in cover, sealed - IP67 (RTIII)
Connection mode
5
-
for PCB
Options
NIL
-
standard
GW
-
GWFI IEC60695-2-12 850°C
GWIT IEC60695-2-13 750°C
Fig. 1
Dimensions
Fig. 2
7
15
4.7
20. 5
PCB Mounting Dimensions
7
4
11. 5
0.4
0.2
0.2
0.8
0.4
Dimensions in millimeters
Dimensions in millimeters
Specifications are subject to change without notice. E&OE.
Page 2 of 2
Ref: DG5N 090514JHM
American Electronic Components Inc., 1101 Lafayette St. Elkhart, IN46516
www.durakoolrelays.com
Sales Department Tel: (888) 847-6552
Bottom view
Similar pages