Round Heat Pipe ATS Part#: ATS-HP-D4L200G30W-001 Description: Closed evaporator-condenser heat transfer systems. A heat pipe’s wick structure and embedded liquid enables it to produce a very high heat flux transport capability, which can be 10-20 times higher than the equivalent diameter solid copper pipe. Round heat pipes offer advantages for certain fin configurations at the condenser end. For Illustration Purposes ONLY. Features & Benefits Applications for Heat Pipes » Tube material: copper » Compact Electronics Enclosures »W ick structures: grooved or sintered copper powder » Aerospace »H igh thermal conductivity » Medical » Light weight » Consumer Electronics »F ast thermal response » HVAC (L)(L)±2.0% ±2.0% (D) (D)±0.5mm ±0.5mm Heat Pipe Length Heat Pipe Length Pipe Outer Pipe Outer Diameter Diameter Qt Qmax = L eff X 1000 Leff = A-(Le=Lc)/2 Heat sink Leff Evaporator block Semiconductor Lc Le Condenser insertion length Evaporator insertion length PRODUCT SPECIFICATIONS L=Length (mm); D=Diameter (mm); WT=Wick Type (S=Sintered, G=Grooved); WF=Working Fluid; TR=Temperature Range (°C) Product Detail Part Number L D Wick Type Working Fluid ATS-HP-D4L200G30W-001 200 4 Grooved Distilled H2O SUGGESTED MINIMUM BEND RADIUS ON ATS HEAT PIPES Temp Range (°C) 30-120 QT (w.m) Leff (mm) Qmax (W) Leff (mm) Qmax (W) Leff (mm) Qmax (W) 4.1 100 41 125 32 150 27 HEAT PIPE JOINING TECHNIQUES 1) For small batches/prototypes, heat pipes can be joined to heat sinks or other pieces Heat Pipe Diameter in mm Minimum Bend Radius in mm 4 12 2) For optimal results, heat pipes should 5 15 be soldered using low temperature solder 6 18 7 21 8 24 with thermal epoxy. at temperatures above 139°C but no greater than 250°C. For further technical information, please contact Advanced Thermal Solutions, Inc. by phone: 1-781-769-2800, email [email protected] or visit www.qats.com. R8-0118 89-27 ACCESS ROAD, NORWOOD, MA 02062 | T: 781.769. 2800 F: 781.769.9979 WWW.QATS.COM | [email protected]