LED Lighting FSP40-ZZAP1(140)VG FEATURES High Efficiency & Long Life Wide Input Range for Worldwide use (up to 305Vac) Built-in PFC Function: up to PF 0.99 IP65 Design for Outdoor Installation Suitable to Dry, Damp, Wet Location Compact Size High Surge Protection: 4kV(IEC61000-4-5) 0-10V DImming Isolation Class II Design, No F.G. Type HL LED Driver for use in Class I Division 2 hazardous location luminaires Protections: Short Circuit/ Over Voltage/ Over Temperature Class 2 power unit PRODUCT HIGHLIGHT Output Voltage/Current 40W/1400mA : Dimming: 0-10V Dimming SPECIFICATION Model Name Wattage Case IP Level Dimming Input Electrical Specification FSP40-ZZAP1(140)VG 40W Plastic IP65 0-10V Dimming Input Voltage 100~277 Vac Input Frequency 47~63 Hz PFC ≧0.99/120Vac, PF≧0.97/230Vac, PF≧0.94/277Vac at full load Input C urrent ≦0.41A /120Vac ; ≦0.21A /230Vac ; ≦0.18A /277Vac Inrush C urrent <6A @ C old start, 230Vac, Full load Constant Current C onstant C urrent / Constant Voltage Output Voltage Output1 15-30 V , 1400 mA and Current Rating Output Electrical Efficiency ≧ 90 % Specification Life 50,000 hours at Tcase of ≤ 65°C Protection OVP,OTP,SC P Function Environmental TEMP. Range Operating : -20℃ to +70℃ Requirement Storage : -40℃ to +85℃ Insulation Primary to Secondary: 500Vdc,25M ohms min. EMC performance EN55015 C lass B C onducted, C lass B radiated EN61000-3-2 C lass C EN61000-4-5 Differential Mode: 4KV Dimension 97.5mm(L) x 72mm(W)x 32mm(H) PROTECTION FUNCTIONS OVP,OTP,SC P This content is subject to change, please refer to specification for m ore detail. FSP reserve the right to change the content without prior notice