EMC EKM8025BB Usb & ps/2 mouse controller Datasheet

eKM8025
USB & PS/2 Mouse Controller
1. General Description
The eKM8025 is an Mouse Controller designed to control both USB & PS/2 Mouse
device with XY Quadrature. This Mouse Controller can auto detect USB or PS/2 mode, and
supports X,Y,Z three axes , and L, R, M, P, N five buttons under both USB and PS2 mode.
2. Features
◆Universal Serial Bus Specification, version 1.1
◆USB HID Specification, version 1.11
◆Auto-detecting PS/2 port or USB port.
◆Compatible with Microsoft 3D PS/2 mouse.
◆Support 3D (X,Y,Z) 5 Key (L,R,M,P,N) input.
◆Support Z/2 Z-axis input type.
◆ Support Agilent HDNS2000、ADNS2051、OM01、OM02、PixArt
PAN101BOI/BSI Optical Mouse Sensor.
◆ 800DPI simulation by firmware(For eKM8025BBP/ eKM8025BCP/
eKM8025BBM/ eKM8025BCM only).
◆Applications:
◇3D, 3 Buttons USB and PS/2 Combo Mouse.
◇3D, 5 Buttons USB and PS/2 Combo Mouse.
1
This specification are subject to be changed without notice Revision1.00(2400/2500)
2006/7/11
eKM8025
USB & PS/2 Mouse Controller
◆ Package:
【400dpi】
◇18 Pin PDIP (300MIL) eKM8025ABP 3D 3K
◇18 Pin SOP (300MIL) eKM8025ABM 3D 3K
◇20 Pin PDIP (300MIL) eKM8025ACP 3D 5K
◇20 Pin SOP (300MIL) eKM8025ACM 3D 5K
【800 dpi simulation by firmware】
◇18 Pin PDIP (300MIL) eKM8025BBP 3D 3K
◇18 Pin SOP (300MIL) eKM8025BBM 3D 3K
◇20 Pin PDIP (300MIL) eKM8025BCP 3D 5K
◇20 Pin SOP (300MIL) eKM8025BCM 3D 5K
2
This specification are subject to be changed without notice Revision1.00(2400/2500)
2006/7/11
eKM8025
USB & PS/2 Mouse Controller
3. Pin assignment
◆eKM8025AB /eKM8025BB (18-Pin) for 3D3Key
□□□□□□□□
4 3 2 1 18171615
M KEY□ 1z
L KEY□ 2
Z1□ 3
Z2□ 4
R KEY□ 5
NA□ 6
VSS□ 7
V3.3□
8
OSCI□ 9
□X1
17 □X2
16 □Y1
15 □Y2
14 □IR_C
13 □D+ / CLK
12 □D- / DATA
11 □VDD
10 □OSCO
18
(0,0)
+
□ 5
14 □
□ 6
X □
□ 7
eKM8025AB/eKM8025BB (18-Pin)
3
8
□
9 101112 13 □
□□□□
Bounding PAD
Symbol
I/O
PIN
Function
M
I
1
Middle Key Input
L
I
2
Left Key Input
Z1
I
3
Z axis Input 1
Z2
I
4
Z axis Input 2
R
I/O
5
Right Key Input
K_OP
I
6
This pin should be connected to V3.3(pin8)
VSS
-
7
GND
V3.3V
O
8
3.3V DC voltage output from internal regulator. This pin has to be tied to a 4.7μF capacitor.
OSCI
I
9
6MHz ceramic resonator input.
OSCO
I/O
10
Return path for 6-MHz ceramic resonator.
VDD
-
11
5 V Power Input
D- / DATA
I/O
12
USB D- or PS/2 Data I/O
D+ / CLK
I/O
13
USB D+ or PS/2 CLK I/O
IR_C
O
14
IR(Sensor power) Control Pin. 1
Y2
I
15
Y axis Input 2
Y1
I
16
Y axis Input 1
X2
I
17
X axis Input 2
X1
I
18
X axis Input 1
This specification are subject to be changed without notice Revision1.00(2400/2500)
2006/7/11
eKM8025
USB & PS/2 Mouse Controller
◆eKM8025AC/eKM8025BC (20-Pin) for 3D5Key
□□□□□□□□
4 3 2 1 20191817
M KEY□ 1z
L KEY□ 2
Z1□ 3
Z2□ 4
R KEY□ 5
P KEY/K_OP□ 6
VSS□ 7
VSS□ 8
V3.3□ 9
OSCI□ 10
□X1
19 □X2
18 □Y1
17 □Y2
16 □IR_C
15 □N KEY
14 □D+ / CLK
13 □D- / DATA
12 □VDD
11 □OSCO
20
(0,0)
+
□5
16 □
□6
15 □
□8
eKM8025AC/eKM8025BC (20-Pin)
4
9
□
10111213 14 □
□□□□
Bounding PAD
Symbol
I/O
PIN
Function
M
I
1
Middle Key Input
L
I
2
Left Key Input
Z1
I
3
Z axis Input 1
Z2
I
4
Z axis Input 2
R
I/O
5
Right Key Input
K_OP
I
6
This pin should be connected to GND with 1MΩ resistance.
P
I
6
Pre Key Input
VSS
-
7,8
V3.3V
O
9
3.3V DC voltage output from internal regulator. This pin has to be tied to a 4.7μF capacitor.
OSCI
I
10
6MHz ceramic resonator input.
OSCO
I/O
11
Return path for 6-MHz ceramic resonator.
VDD
-
12
5 V Power Input
D- / DATA
I/O
13
USB D- or PS/2 Data I/O
D+ / CLK
I/O
14
USB D+ or PS/2 CLK I/O
N
I
15
Next Key Input
IR_C
O
16
IR(Sensor power) Control Pin. 1
Y2
I
17
Y axis Input 2
Y1
I
18
Y axis Input 1
X2
I
19
X axis Input 2
X1
I
20
X axis Input 1
GND
This specification are subject to be changed without notice Revision1.00(2400/2500)
2006/7/11
eKM8025
USB & PS/2 Mouse Controller
4. Function description
X1
X2
Y1
Y2
X-COUNTER
X
Y
USB PROTOCOL
CONTROLLER
Y-COUNTER
DATA
PROCESS
Z1
Z2
Z
PS/2 PROTOCOL
CONTROLLER
Z-COUNTER
BTM REGISTER
IR_C
MULTIPLEXER
DATA
I/O
IR_C
D+/CLK
D-/DATA
LMRPN
MODE
SELECTOR
DETECT
CIRCUIT
L MR P N
Fig-1 : Function block
◆Quadrature Signal Timing Diagram
◇X、Y、Z Axis Counting
XY AXIS COUNTING
X1(Y1)
X2(Y2)
+1
+1
+1
+1
-1
-1
-1
-1
Z/2 COUNTING
Z1
Z2
+1
5
+1
-1
This specification are subject to be changed without notice Revision1.00(2400/2500)
-1
2006/7/11
eKM8025
USB & PS/2 Mouse Controller
◇Quadrature Output Crossed Width Limit
X1(Y1)
X2(Y2)
T
T
T
T
T
T
T
T
Note:For X(Y) Axis ,T > 40us
For Z Axis ,T > 1ms
◆PS/2 function description
◇PS/2 Mouse Commands Description
Hex Code
Command
eKM8023 echo code
FF
Reset
FA,AA,00
FE
Resend
XX,(XX,XX)
F6
Set Default
FA
F5
Disable
FA
F4
Enable
FA
F3,XX
Set Sampling Rate
FA,FA
F2
Read Device Type
FA,00
F0
Set Remote Mode
FA
EE
Set Wrap Mode
FA
EC
Reset Wrap Mode
FA
EB
Read Data
FA,XX,XX,XX
EA
Set Stream Mode
FA
E9
Status Request
FA,XX,XX,XX
E8
Set Resolution
FA,FA
E7
Set Autospeed
FA
E6
Reset Autospeed
FA
◇Microsoft PS/2 scrolling mouse
(A) Entering procedure: Except in WRAP mode, while eKM8023 received the following consecutive
command.
i. F3 C8 ---- set sampling rate 200/sec
ii. F3 64 ---- set sampling rate 100/sec
iii. F3 50 ---- set sampling rate 80/sec
(B) Entering procedure: after eKM8023 enter scrolling mouse mode (Mouse ID = 03), while eKM8023
received the following consecutive command.eKM8023 will enter 5 buttons mode Mouse ID:04)
6
i
F3 C8 ------- set sampling rate 200/sec
ii
F3 C8 ---- set sampling rate 200/sec
iii
F3 50 ---- set sampling rate 80/sec
This specification are subject to be changed without notice Revision1.00(2400/2500)
2006/7/11
eKM8025
USB & PS/2 Mouse Controller
(C) Operating in PS/2 scrolling mode:
a. All of the commands in legacy mode still be valid.
b. The ID code of read device type command (F2) will changed from "00" to be "03".
c. Data report will be four bytes format:
【3D3Buttons Data Format】
Byte
1
2
3
4
Bit
0
1
2
3
4
5
6
7
0-7
0-7
0-7
Description
Left button status; 1 = pressed
Right buttson status; 1 = pressed
Middle button status; 1 = pressed
Reserve to 1
X data sign; 1 = negative
Y data sign; 1 = negative
X data overflow; 1 = overflow
Y data overflow; 1 = overflow
X data (D0-D7)
Y data (D0-D7)
Z data (D0-D7)
(D) Operating in 3D5K mode:
a. All of the commands in legacy mode still be valid.
b. The ID code of read device type command (F2) will changed from "03" to be "04".
c. Data report will be four bytes format:
【3D5Buttons Data Format】
Byte
1
2
3
4
4
4
4
Bit
0
1
2
3
4
5
6
7
0-7
0-7
0-3
4
5
6,7
Description
Left button status; 1 = pressed
Right button status; 1 = pressed
Middle button status; 1 = pressed
Reserve to 1
X data sign; 1 = negative
Y data sign; 1 = negative
X data overflow; 1 = overflow
Y data overflow; 1 = overflow
X data (D0-D7)
Y data (D0-D7)
Z data (D0-D3)
P KEY status; 1 = pressed
N KEY status; 1 = pressed
Reserve to 0
(E) Exiting Microsoft scrolling mode & 3D5K mode:
There are two ways to exit:
a. Power off.
b. Reset command (FF).
◇Z-axis Input Function
The Z0-Z7 limit value is ±7
Z-axis counter accumulates the Z1, Z2 phase changed by movement. This mode includes noise immunity.
Z/2 : 2 dot per count. The wheel should stay at Z1=0, Z2=0 or Z1=1, Z2=1 Phase
7
This specification are subject to be changed without notice Revision1.00(2400/2500)
2006/7/11
eKM8025
USB & PS/2 Mouse Controller
◆USB function Description
【Descriptor in USB Mode】
Descriptor Type
Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8
Device Descriptor
Configuration Descriptor
12
01
10
01
00
VID1
VID0
PID1
00
01
09
02
22
00
01
04
00
00
21
11
00
00
08
00
02
01
00
A0
01
03
01
02
01
00
01
22
34
PID0 REV1 REV0
32
09
Interface Descriptor
00
09
HID Descriptor
00
Endpoint
07
05
81
03
04
00
0A
HID Report Descriptor
05
A1
15
81
05
15
81
01
00
00
02
01
80
06
09
05
25
95
09
25
C0
02
09
01
01
30
7F
C0
A1
19
95
75
09
75
01
01
KEY1
KEY2
31
08
09
29
75
81
09
95
01
KEY1
01
03
38
03
*VID:Vendor ID (Default = 0x04F3).
*PID:Product ID (3D3K MOUSE = 0x0211 ,3D5K MOUSE = 0x0212).
*REV:Revision Number = 0x2400(eKM8025A)/0x2500(eKM8025B)
*KEY1:3D3K MOUSE = 3, 3D5K MOUSE = 5 .
*KEY2:3D3K MOUSE = 5, 3D5K MOUSE = 3 .
*Product String:”PS/2+USB Mouse”
【USB Mouse Report Data Type】
Byte0
Byte1
Byte2
Byte3
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
0
0
0
N
P
M
R
L
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
Bit2
Bit1
Bit0
Bit2
Bit1
Bit0
X-AXIS
Bit7
Bit6
Bit5
Bit4
Bit3
Y-AXIS
Bit7
Bit6
Bit5
Bit4
Bit3
Z-AXIS
*3D3K MODE , P = N = 0.
8
This specification are subject to be changed without notice Revision1.00(2400/2500)
2006/7/11
eKM8025
USB & PS/2 Mouse Controller
5. Absolute Maximum Rating
Symbol
Temperature under bias
Storage temperature
Input voltage
Output voltage
min
0
-65
-0.5
-0.5
Max
70
150
6.0
6.0
unit
ºC
ºC
V
V
6. Electrical Characteristic
(T = 0ºC ~70ºC, VDD=4.4~5.2V, VSS=0V)
Symbol
Parameter
Condition
Min
Type
Max
Unit
3.0
3.3
3.6
V
-
2.3
V
3.3V Regulator
VRag
Output voltage of 3.3v Regulator
VDD = 4.2V ~ 5.2V
VResetL
Low Power Reset detecting low Voltage
VResetH
Low Power Reset detecting high Voltage
2.4
-
V
-
-
1
μA
MCU operating
Input Leakage Current for input pins
VIN=VDD,VSS
VIHX
Clock Input High Voltage
OSCI
2.5
-
-
V
VILX
Clock Input Low Voltage
OSCI
-
-
1.0
V
1.1
-
V
IIL
GPIO Pins
VHL
High/Low level transfer point
Input
VOH
Output High Voltage
IDrive = 5.0mA
2.4
-
-
V
VOL
Output Low Voltage
ISink = 5.0mA
-
-
0.4
V
IPH
Input current with pull-high resister
-
25
-
μA
IPL
Input current with pull-low resister
-
330
-
μA
2.8
-
3.6
V
-
-
0.3
V
0.2
-
-
V
The input pin with internal
pull-high resistor of Port6 or
port7 is connected to VSS.
The input pin with internal
pull-low resistor of Port6 is
connected to VDD.
USB Interface
9
VOH
Static Output High
VOL
Static Output Low
VDI
Differential Input Sensitivity
VCM
Differential Input Command Mode Range
0.8
-
2.5
V
VSE
Single Ended Receiver Threshold
0.8
-
2.0
V
CIN
Transceiver Capacitance
-
-
20
pF
VRG
Output Voltage of Internal Regulator
3.0
-
3.6
V
RPH
Internal Pull-high Resistor
-20%
1.5
+20%
kΩ
USB operation Mode
USB operation Mode
This specification are subject to be changed without notice Revision1.00(2400/2500)
2006/7/11
eKM8025
USB & PS/2 Mouse Controller
7. Package Diagram
◆PDIP-18L 300MIL PACKAGE OUTLINE DIMENSION(Unit:mm)
◆PDIP-20L 300MIL PACKAGE OUTLINE DIMENSION(Unit:mm)
10
This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11
eKM8025
USB & PS/2 Mouse Controller
◆SOP-18L 300MIL PACKAGE OUTLINE DIMENSION(Unit:mm)
◆SOP-20L 300MIL PACKAGE OUTLINE DIMENSION(Unit:mm)
11
This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11
eKM8025
USB & PS/2 Mouse Controller
8. Pad List Information
◆eKM8025AB/eKM8025BB Pad Configuration
□□□□□□□□
4 3 2 1 18171615
(0,0)
+
□5
□6
□7
8
□
14 □
X□
9 101112 13 □
□□□□
◆eKM8025AB/eKM8025BB Pad Name & Coordinate Table
Pad Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
12
Chip Size:1520*2580 UM
Pad Name
M_KEY
L_KEY
Z1
Z2
R_KEY
K_OP
VSS
V3.3
OSCI
OSCO
VDD
D_MNS
D_PLUS
NC
IR_C
Y2
Y1
X2
X1
Pad Coordinate (X, Y)
196.5, 1176.7
91.5, 1176.7
-13.5, 1176.7
-118.5, 1176.7
-652.7, -785
-652.7, -890
-652.7, -997.5
-304.45, -1182.6
44.3, -1182.6
149.3, -1182.6
256.9, -1182.6
364.4, -1182.6
647.3, -1015.8
647.3, -901.6
647.3, -796.6
616.5, 1176.7
511.5, 1176.7
406.5, 1176.7
301.5, 1176.7
This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11
eKM8025
USB & PS/2 Mouse Controller
◆eKM8025AC/eKM8025BC Pad Configuration
□□□□□□□□
4 3 2 1 20191817□
(0,0)
+
□5
□6
□8
9
□
16 □
15 □
10111213 14 □
□□□□
◆eKM8025AC/eKM8025BC Pad Name & Coordinate Table
Pad Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
13
Chip Size:1520*2580 UM
Pad Name
M_KEY
L_KEY
Z1
Z2
R_KEY
P_KEY/K_OP
Pad Coordinate (X, Y)
196.5, 1176.7
91.5, 1176.7
-13.5, 1176.7
-118.5, 1176.7
-652.7, -785
-652.7, -890
VSS
V3.3
OSCI
OSCO
VDD
D_MNS
D_PLUS
N_KEY
IR_C
Y2
Y1
X2
X1
-652.7, -997.5
-304.45, -1182.6
44.3, -1182.6
149.3, -1182.6
256.9, -1182.6
364.4, -1182.6
647.3, -1015.8
647.3, -901.6
647.3, -796.6
616.5, 1176.7
511.5, 1176.7
406.5, 1176.7
301.5, 1176.7
This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11
eKM8025
USB & PS/2 Mouse Controller
9. Application circuit
※NOTICE DIAGRAM
R_LED
OM02_7
OMA100
1
2
3
4
5
Q2
eKM8025AB/eKM8025BB
1
2
V3.3
1
2
3
1
2
4
M
X1
L
X2
Z1
Y1
Z2
Y2
6
3904
7
18
+
4.7uF
17
0.1uF
6
V3.3
7
8
+
C9
9
4.7uF
R
IR_C
K_OP
D+/CLK
VSS
D-/DATA
V3.3
VDD
OSCI
OSCO
TIO
X2
PD
X1
R_BIN
Y1
VDD
Y2
GND
XY _LED
ROSCA
REFA
GND
REFB
ROSCB
16
15
14
13
C8
12
C7 +
11
Rosc Cosc
10
9
16
15
Z-AXIS
5
8
TCLK
14
R4
13
R3
12
R2
11
R1
Q1
3904
VDD
10 C6
+
C5
C4
+
C3
C2
+
D+ / CLK
C1
D- / DATA
VSS
20P
6M
SHLD
20P
PORT
◆COMPONENTS IN DETAIL
TYPE
NORMAL
APPLICATION
EFT BETTER
IMPROVEMENT
TYPE
NORMAL
APPLICATION
EFT BETTER
IMPROVEMENT
R1
R2
R3
-
-
33Ω
33Ω
C5
C6
C7
C8
C9
10uF
0.1uF(104)
100uF
0.1uF(104)
4.7uF
10Ω
C4
R4
C1
C2
C3
-
1.5KΩ
10uF
0.1uF(104)
0.1uF(104)
-
Cosc
-
10uF
1nF(102)
** C5 & C6 have to be closed to MCU(VDD)
** C7 & C8 have to be closed to Sensor(VDD).
** C9 has to be closed to MCU(V3.3)
** It’s NOT recommended to use eKM8025B(800DPI) for Ball Type.
14
This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11
eKM8025
USB & PS/2 Mouse Controller
◆eKM8025AB _Mechanical Z/2 3D3Key Application For Ball Type
6
1
5
2
eKM8025AB
4
1
2
M
X1
L
X2
Z1
Y1
Z2
Y2
18
6
1
17
5
1
2
3
1
2
4
2
16
4
15
200
Z-AXIS
5
R
6
IR_C
K_OP
7
8
D+/CLK
VSS
D-/DATA
V3.3
VDD
OSCI
OSCO
+
9
4.7uF
14
13
12
10Ω
11
0.1uF
10
C4
+
C2
0.1uF
10uF
+
VDD
C1
10uF
D+ / CLK
D- / DATA
C3
VSS
20P
6M
1、C9 HAS TO be clos ed to V3.3(MCU)
20P
SHLD
2、C3 & C4 HAVE TO be clos ed to VDD(MCU)
PORT
◆eKM8025AB//eKM8025BB _Mechanical Z/2 3D3Key Application For OM02
33Ω
OM02_5
OMA100
1
2
1、C9 HAS TO be clos ed to V3.3(MCU)
2、C3 & C4 HAVE TO be clos ed to VDD(MCU)
3
3、C5 & C6 HAVE TO be clos ed to VDD(SENSOR)
4
TCLK
TIO
X2
PD
X1
R_BIN
Y1
VDD
Y2
GND
16
15
14
13
0.1uF
5
Q2
eKM8025AB/eKM8025BB
1
2
1
2
3
1
2
4
M
X1
L
X2
Z1
Y1
Z2
Y2
7
18
+
4.7uF
17
6
7
8
+
C9
9
4.7uF
R
IR_C
K_OP
D+/CLK
VSS
D-/DATA
V3.3
VDD
OSCI
OSCO
0.1uF
8
XY _LED
ROSCA
REFA
GND
REFB
ROSCB
+100uF
C6
C5
11
Rosc Cosc
10
9
16
15
Z-AXIS
5
6
3904
12
Q1
1.5K
14
3904
13
12
10Ω
11
0.1uF
10
C4
+
C3
10uF
C2
0.1uF
+
C1
10uF
VDD
D+ / CLK
D- / DATA
VSS
20P
6M
20P
SHLD
PORT
15
This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11
eKM8025
USB & PS/2 Mouse Controller
◆eKM8025AC _ Mechanical 3D5Key Application For Ball Type
6
1
5
2
eKM8025AC
4
1
2
M
20
X1
L
X2
Z1
Y1
Z2
Y2
6
1
19
5
1
2
3
1
2
4
2
18
4
17
200
Z-AXIS
5
6
7
8
9
1M Ω
+
C9
10
4.7uF
R
16
IR_C
P/K_OP
15
N
VSS
D+/CLK
VSS
D-/DATA
V3.3
VDD
OSCI
OSCO
14
13
12
0.1uF
11
C4
10Ω
+
C2
0.1uF
10uF
+
VDD
C1
10uF
D+ / CLK
D- / DATA
C3
VSS
20P
6M
1、C9 HAS TO be clos ed to V3.3(MCU)
20P
SHLD
2、C3 & C4 HAVE TO be clos ed to VDD(MCU)
PORT
◆eKM8025AC/eKM8025BC _ Mechanical 3D5Key Application For OM02
33Ω
OM02_9
OMA100
1
2
1、C9 HAS TO be clos ed to V3.3(MCU)
2、C3 & C4 HAVE TO be clos ed to VDD(MCU)
3
3、C5 & C6 HAVE TO be clos ed to VDD(SENSOR)
4
TCLK
TIO
X2
PD
X1
R_BIN
Y1
VDD
Y2
GND
16
15
14
13
0.1uF
5
Q2
eKM8025AC/eKM8025BC
1
2
1
2
3
1
2
4
M
X1
L
X2
Z1
Y1
Z2
Y2
7
20
+
4.7uF
19
6
7
8
9
1M Ω
R
IR_C
P/K_OP
N
VSS
D+/CLK
VSS
D-/DATA
V3.3
VDD
OSCI
OSCO
+
10
4.7uF
0.1uF
8
XY _LED
ROSCA
REFA
GND
REFB
ROSCB
C5
11
Rosc Cosc
10
9
18
17
Z-AXIS
5
6
3904
+100uF
C6
12
Q1
1.5K
16
3904
15
14
13
12
0.1uF
11
C4
10Ω
+
C3
10uF
C2
0.1uF
+
C1
10uF
VDD
D+ / CLK
D- / DATA
VSS
20P
6M
20P
SHLD
PORT
16
This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11
eKM8025
USB & PS/2 Mouse Controller
ELAN (HEADQUARTER) MICROELECTRONICS CORP., LTD.
Address : No. 12, Innovation 1st. Rd. Science-Based Industrial Park, Hsinchu City, Taiwan.
Telephone: 886-3-5639977
Facsimile : 886-3-5639966
ELAN (H.K.) MICROELECTRONICS CORP., LTD.
Address : Rm. 1005B, 10/F, Empire Centre, 68 Mody Road, Tsimshatsui, Kowloon, Hong Kong.
Telephone: 852-27233376
Facsimile : 852-27237780
E-mail : [email protected]
ELAN MICROELECTRONICS SHENZHEN, LTD.
Address : SSMEC Bldg. 3F , Gaoxin S. Ave. 1st , South Area , Shenzhen High-tech Industrial Park., Shenzhen
Telephone: 86-755-26010565
Facsimile : 86-755-26010500
ELAN MICROELECTRONICS SHANGHAI, LTD.
Address : #23 Building No.115 Lane 572 BiBo Road. Zhangjiang, Hi-tech Park, Shanghai
Telephone: 86-21-50803866
Facsimile : 86-21-50804600
Elan Information Technology Group.
Address: 1821 Saratoga Avenue, suite 250, Saratoga, CA 95070, USA
Telephone: 1-408-366-8225
Facsimile : 1-408-366-8220
Elan Microelectronics Corp. (Europe)
Address: Dubendorfstrasse 4, 8051 Zurich, Switzerland
Telephone: 41-43-2994060
Facsimile : 41-43-2994079
Email : [email protected]
Web-Site : www.elan-europe.com
Copyright © 2004 ELAN Microelectronics Corp.
All rights reserved. ELAN owns the intellectual property rights, concepts, ideas, inventions, know-how
(whether patentable or not) related to the Information and Technology (herein after referred as "
Information and Technology") mentioned above, and all its related industrial property rights throughout the
world, as now may exist or to be created in thefuture. ELAN represents no warranty for the use of the
specifications described, either expressed or implied, including, but not limited, to the implied warranties of
merchantability and fitness for particular purposes. The entire risk as to the quality and performance of the
application is with the user. In no even shall ELAN be liable for any loss or damage to revenues, profits or
goodwill or other special, incidental, indirect and consequential damages of any kind, resulting from the
performance or failure to perform, including without limitation any interruption of business, whatever
resulting from breach of contract or breach of warranty, even if ELAN has been advised of the possibility of
such damages.
The specifications of the Product and its applied technology will be updated or changed time by time. All
the information and explanations of the Products in this website is only for your reference. The actual
specifications and applied technology will be based on each confirmed order.
ELAN reserves the right to modify the information without prior notification. The most up-to-day
information is available on the website http://www.emc.com.tw.
17
This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11
Similar pages