Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT132SMX The ACT132SMX is a low height, plastic moulded package incorporating a cylinder type crystal. It is ideally suitable for automatic insertion, especially where high density surface mounting is needed. It has excellent shock and heat resistant properties. Applications include Radio Communications Equipment, Pagers, Cellular Phones, portable applications and a variety of clock sources. Specification Parameter Symbol Specification Frequency Range Frequency Tolerance Frequency v Temperature Turnover Temperature Temp. Coefficient Temp Operating Range Temp Storage Range Equivalent Series Resistance Shunt Capacitance Motional Capacitance Load Capacitance Maximum Drive Level Drive Level Aging Reflow Profile fo Δf/fo Δf/fo Tp K Tope Tsto ESR C0 C1 CL DL DL max Fa Tsol 32.768KHz ±20, ±30, ±50, ±100ppm Please specify See Drawing +25°C ±5°C -3.5 x 10-8/°C2 -40 ~+85°C -55 ~ +125°C 55KΩ max 0.9pF typical 2.3fF typical 12.5pF Please refer to note 1 1μ W recommended 0.1μ W ±5ppm max 25°C ±3°C, first year See diagram: page 4 Dimensions in mm Suggested Footprint 3.88 Note 1 A 7pF load capacitance device is available but at present this device is not RoHS compatible. The reflow profile for this device is available on request. 1.2 7.3 max #4 1.3 #3 2.6 #1 Condition 2.4 #2 1.8 2.0 max 0.4 5.08 4.3 max Lead Free-RoHS comp. Pad Surface Material SnBi 0.007-0.012mm A solder containing >85% Lead as an inapplicability substance is used on an internal terminal. Exempt under the RoHS legislation (1000ppm Pb) Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Tolerance, Operating Temperature Range, Load Capacitance In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 1 of 4 Issue : 5 A3 Date :26/7/0 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT132SMX TAPE AND REELING 3.000 PIECE REELS MATERIAL Tape Reel POLYSTYRENE MPPE ORIENTATION IN CARRIER TAPE LAYOUT OF TAPE No Components 20 Pockets Minimum Cover Tape Leader 400mm Minimum Start of carrier tape bent vertically and hooked into reel slot. COVER TAPE OVERLAP In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 2 of 4 Issue : 5 A3 Date :26/7/0 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT132SMX TAPE & REELING SPECIFICATION cont'd PEEL STRENGTH Using method below the force to start the tape peeling with a pull speed of 300±10 mm/min shall be 0.1~1.3N. REEL DIMENSIONS (mm) In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 3 of 4 Issue : 5 A3 Date :26/7/0 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT132SMX TAPE & REELING SPECIFICATION cont'd CARRIER TAPE DIMENSIONS (mm) ACT132SMX REFLOW SOLDERING PROFILE In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 4 of 4 Issue : 5 A3 Date :26/7/0