3.4mm RIGHT ANGLE LED INDICATOR L1384QMP/YD Description Features ! PRE-TRIMMED ! CAN ! I.C. The Yellow source color devices are made with Gallium LEADS FOR PC MOUNTING. BE ASSEMBLED WITH EACH OTHER. Arsenide Phosphide on Gallium Phosphide Yellow Light COMPATIBLE. ! BLACK Emitting Diode. CASE ENHANCES CONTRAST RATIO. ! WIDE VIEWING ANGLE. ! HIGH RELIABILITY LIFE MEASURED IN YEARS. !HOUSING MATERIAL: PPA !PACKAGE : 1000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAA4139 APPROVED : REV NO: V.1 CHECKED : Digitally signed by YANGSHOUFEN cn=YANGSHOUFEN, ou=42, o=KINGBRIGHT, c=US Date: 2001.10.05 15:30:55 +08'00' Reason: Document is certified DATE: SEP/26/2001 DRAWN: S.S. Wu PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e L1384QMP/YD Iv (m c d ) @ 10 m A Cas e-Co lo r YELLOW (GaAsP/GaP) YELLOW DIFFUSED V i ew i n g An g l e Min . Ty p . 2θ1/2 8 15 60 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Yellow λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Halfwidth Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current All 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C P ar am e t e r Yello w Un it s Power dissipation 10 5 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA4139 APPROVED : REV NO: V.1 CHECKED : DATE: SEP/26/2001 DRAWN: S.S. Wu PAGE: 2 OF 4 Yellow L1384QMP/YD SPEC NO: DSAA4139 APPROVED : REV NO: V.1 CHECKED : DATE: SEP/26/2001 DRAWN: S.S. Wu PAGE: 3 OF 4 L1384QMP/YD SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process." Recommended Soldering Pattern Tape Specifications SPEC NO: DSAA4139 APPROVED : REV NO: V.1 CHECKED : DATE: SEP/26/2001 DRAWN: S.S. Wu PAGE: 4 OF 4