Taiyo Yuden D5DA942M5K2S2-Z Fbar/saw devices (saw duplexers) Datasheet

Spec Sheet
PrintPDF
FBAR/SAW Devices (SAW Duplexers)
D5DA942M5K2S2
Features
Item Summary
SAW, Duplexer, 1.8x1.4x0.6mm
Band 8
Lifecycle Stage
Mass Production
Standard packaging quantity (minimum)
Taping Embossed 3000 , 15000pcs
Products characteristics table
External Dimensions
W-CDMA / CDMA / LTE
Dimension L
1.8 + 0/- 0.20 mm
Type
SAW
Dimension W
1.4 + 0/- 0.20 mm
Function
Duplexer
Dimension T
Max 0.6 mm
band
Band 8
Insertion Loss (typ)
1.3/1.5 dB
System
(Tx-ANT/ANT-Rx)
Isolation (typ)
58/56 dB
Operating Temp. Range
-30 to +85 ℃
RoHS2 Compliance (10 subst.)
Yes
REACH Compliance (168 subst.)
Yes
Soldering
Reflow
2016.11.21
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the Date at any time without notice.
Before making final selection, please check product specification.
http://www.ty-top.com
Powered by TCPDF (www.tcpdf.org)
Pb
MSL1
Pb-free
* Pb Free Part
Customer Name
Standard
System
Band 8 Duplexer
DATE
Part Number
D5DA942M5K2S2
Version 2.1bbE
Table 1-1.
Item
Tx
to
ANT
Insertion loss(*1)
Ripple
VSWR
Min
Typ
Max
882.4~912.6
-
1.3
-
880.24~914.76
882.4~912.6
Unit
Remarks
2.4
dB (*2)
-20~+85℃
-
3.6
dB
-30~-20℃
-
1.6
3.2
dB
-20~+85℃
-
1.5
3.2
dB
Ta=+50℃,29dBm, 10000h,
LTE modulation
-
880.24~914.76
-
1.4
2.1
Ant
880.24~914.76
-
1.4
2.1
927.4~957.6
48
54
-
dB(*2)
-20~+85℃
37
-
-
dB
-30~-20℃
42
-
-
dB
-20~+0℃
48
54
-
dB
+0~+85℃
1565~1606
40
43
-
dB
1760~1830
40
48
-
dB
2640~2745
28
37
-
dB
927.4~957.6
925.24~959.76
925.24~959.76
925.24~959.76
880.24~914.76
1805~1875
2400~2500
45
40
40
1.5
1.8
1.1
1.8
1.7
54
52
49
2.5
3.5
3.0
2.9
2.1
2.1
-
dB (*2)
dB
dB
dB
2685~2790
40
48
-
dB
925.24~959.76
Insertion loss(*1)
Ripple
VSWR
Specification
Condition
(MHz)
Tx
Absolute
Attenuation
ANT
to
Rx
Final
Electrical Specification
880.24~914.76
Input Power
Jan.29, 2016
Rx
Ant
Absolute
Attenuation
925.24~959.76
(*1) Specification of insertion loss excludes loss that comes from the test board.
(*2) Integrated over +/-1.92MHz around the WCDMA channel center frequency
-
dB
dB
dB
-20~+85℃
-30~-20℃
-20~+85℃
Pb
MSL1
Pb-free
* Pb Free Part
Customer Name
Standard
System
Band 8 Duplexer
DATE
Part Number
D5DA942M5K2S2
Version 2.1bbE
Jan.29, 2016
Final
Table 1-2. Electrical Specification
Item
Tx to Rx
Isolation
Condition
(MHz)
882.4~912.6
880.24~914.76
927.4~957.6
925.24~959.76
Terminating Impedance
Specification
Device size (L max. x W max. x H max.)
dB(*2)
dB
dB
dB(*2)
dB
dB
dB
-20~+85℃
50 // 22nH
50
50 // 8.2nH
Ω
Single-ended
Single-ended
Single-ended
-30 to +85
℃
Max
55
48
55
55
40
45
53
58
58
58
56
-
Operating Temperature
DC impedance to ground
Remarks
Typ
Tx port
Rx port
Ant port
Maximum DC in all ports
Unit
Min
-
-
Ω
Ω
VDC
Device only
100
MΩ
Device only
1.8 x 1.4 x 0.6
mm
(*2) Integrated over +/-1.92MHz around the WCDMA channel center frequency
5
-30~+25℃
-20~+85℃
-30~-20℃
-20~+0℃
+0~+85℃
Pb
MSL1
Pb-free
* Pb Free Part
Customer Name
Standard
System
Band 8 Duplexer
DATE
Part Number
D5DA942M5K2S2
Version 2.1bbE
Jan.29, 2016
Final
Dimensions
0.6max.
max
<7>
<5>
<6>
<8>
index <1>
<5>
<4>
<2>
<6>
<7>
<4>
<3>
<3>
< Top View >
< Side View >
<8>
<2>
<1>
< Bottom View >
Unit: mm
Pin assignment
Pin No.
Pin name
Description
1
Rx
Receiver
2
GND
Ground
3
Tx
Transmitter
4
GND
Ground
5
GND
Ground
6
ANT
Antenna
7
GND
Ground
8
GND
Ground
Figure 1. Dimensions and Pin assignment
Pb
MSL1
Pb-free
* Pb Free Part
Customer Name
Standard
System
Band 8 Duplexer
DATE
Part Number
D5DA942M5K2S2
Version 2.1bbE
Jan.29, 2016
Final
Evaluation Circuit
Ant (50Ω)
L=8.2nH (Q=∞)
6
Rx (50Ω)
Tx (50Ω)
2,4,
1 5,7,8 3
L=22nH (Q=∞)
GND
Figure 2.
1~8 : Pin No.
Evaluation Circuit
Recommended foot print pattern
Common GND
External appearance
in Chip carrier
:Pad pattern
:Resist pattern
Figure 3. Recommended foot print pattern
Pb
Pb-free
MSL1
* Pb Free Part
Customer Name
Standard
System
Band 8 Duplexer
DATE
Part Number
D5DA942M5K2S2
Version 2.1bbE
Tx to Ant
Ant to Rx
Figure 4-1. Electrical Characteristics
These data exclude loss that comes from the test board.
Jan.29, 2016
Final
Pb
Pb-free
MSL1
* Pb Free Part
Customer Name
Standard
System
Band 8 Duplexer
DATE
Part Number
D5DA942M5K2S2
Version 2.1bbE
Tx to Ant, Ant to Rx
Tx to Rx Isolation
Figure 4-2. Electrical Characteristics
These data exclude loss that comes from the test board.
Jan.29, 2016
Final
Pb
Pb-free
MSL1
* Pb Free Part
Customer Name
Standard
System
Band 8 Duplexer
DATE
Part Number
D5DA942M5K2S2
Version 2.1bbE
Tx Port
Figure 4-3. Electrical Characteristics
Jan.29, 2016
Final
Pb
Pb-free
MSL1
* Pb Free Part
Customer Name
Standard
System
Band 8 Duplexer
DATE
Part Number
D5DA942M5K2S2
Version 2.1bbE
Rx Port
Figure 4-4. Electrical Characteristics
Jan.29, 2016
Final
Pb
Pb-free
MSL1
* Pb Free Part
Customer Name
Standard
System
Band 8 Duplexer
DATE
Part Number
D5DA942M5K2S2
Version 2.1bbE
Ant Port
Figure 4-5. Electrical Characteristics
Jan.29, 2016
Final
Pb
Pb-free
MSL1
* Pb Free Part
Customer Name
Standard
System
Band 8 Duplexer
DATE
Part Number
D5DA942M5K2S2
Version 2.1bbE
Tx to Ant (Wide span)
Ant to Rx (Wide span)
Figure 4-6. Electrical Characteristics
Jan.29, 2016
Final
Pb
MSL1
Pb-free
* Pb Free Part
Customer Name
Standard
System
Band 8 Duplexer
DATE
Part Number
D5DA942M5K2S2
Version 2.1bbE
Jan.29, 2016
Final
Ordering Code
Ordering Code
Packing
Reel size
Status
D5DA942M5K2S2-Z
Tape & Reel
3,000 pcs.
MP
D5DA942M5K2S2-ZA
Tape & Reel
less than 3,000 pcs.
MP
D5DA942M5K2S2-Y
Tape & Reel
15,000 pcs.
MP
D5DA942M5K2S2-YA
Tape & Reel
less than 15,000 pcs.
MP
D5DA942M5K2S2-Q
Bulk
few pcs.
MP
*Minimum order quantity (MOQ) is assigned for each inquiry, Please contact to Sales Representatives.
*MP: Mass Production
Notice
All of the contents specified herein are subject to change without notice due to technical
improvements, etc.
Please contact Taiyo Yuden Co., Ltd. for further details of product specifications.
Please conduct validation and verification of products in actual condition of mounting
and operating environment before commercial shipment of the equipment.
This product is for general electronics equipment such as Audio-Visual equipment, household
electronics, office supplies, information services and telecommunications; therefore, in case
this product is used for any medical equipment, space equipment, nuclear equipment or
disaster prevention equipment, please contact Taiyo Yuden in advance.
In case this product is used for general electronics equipment or circuits which require high
safety and high reliability, thoroughly evaluate on safety and add a protection circuit if
necessary.
Similar pages