® CLD-DS55 Rev 4 Product family data sheet ® Cree XLamp CXA1512 LED Product Description features Table of Contents The XLamp CXA1512 LED array • Available in ANSI white bins Characteristics............................... 2 expands Cree’s family of high‑flux, as well as 4-step and 2-step Operating Limits............................. 2 multi‑die EasyWhite® bins at 2700 K, Flux Characteristics, EasyWhite 3000 K, 3500 K, 4000 K and Order Codes and Bins..................... 3 5000 K CCT Flux Characteristics, ANSI White arrays easy-to-use XLamp the in a platform. lighting‑class CXA1512’s emitting surface directional smaller, and small, With reliability, uniform enables both non-directional lighting applications including lamp retrofit and luminaire designs. • Available in ANSI white bins as Relative Spectral Power Distribution.. 9 at 5700 K and 6500 K CCT Electrical Characteristics.................. 9 • Available in 70-, 80-, 90- and Relative Luminous Flux...................10 93‑minimum CRI options Typical Spatial Distribution..............11 Available in 2-step and 4-step color • Forward voltage: 37 V Performance Groups - Brightness.....11 consistency, and featuring a 9‑mm • 85 °C binning and Performance Groups - Chromaticity.. 12 optical source, the CXA1512 brings characterization new levels of flux and efficacy to this form factor. • Maximum drive current: 600 mA • 115° viewing angle, uniform chromaticity profile Cree EasyWhite Bins Plotted on the 1931 CIE Color Space....................14 Cree ANSI White Bins Plotted on the 1931 CIE Color Space...............15 Bin and Order Code Formats...........16 • Top-side solder connections Mechanical Dimensions..................16 • Thermocouple attach point Thermal Design.............................17 • NEMA SSL-3 2011 standard flux bins www.cree.com/Xlamp Order Codes and Bins..................... 6 well as 4-step EasyWhite bins Notes...........................................18 Packaging.....................................19 • RoHS- and REACh‑compliant • UL-recognized component (E349212) Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp CXA1512 LED Characteristics Characteristics Unit Viewing angle (FWHM) Minimum Typical degrees ESD withstand voltage (HBM per Mil-Std-883D) Maximum 115 V 8000 DC forward current mA 600* Reverse current mA 0.1 Forward voltage (@ 350 mA, 85 °C) V Forward voltage (@ 350 mA, 25 °C) V * 37 42 Refer to the Operating Limits section. Operating Limits The maximum current rating of the CXA1512 is dependent on the case temperature (Tc) when the LED has reached thermal equilibrium under steady-state operation. Please refer to the Mechanical Dimensions section on page 16 for the location of the Tc measurement point. CXA1512 700 600 If (mA) 500 400 300 200 100 0 0 25 50 75 100 125 150 Case Temperature (°C) Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 2 XLamp CXA1512 LED Flux Characteristics, EasyWhite Order Codes and Bins (If = 350 mA, TJ = 85 °C) The following tables provide order codes for XLamp CXA1512 LEDs. For a complete description of the order code nomenclature, please reference Bin and Order Code Formats (page 16). Base Order Codes Min. Luminous Flux @ 350 mA CRI CCT Range Min 70 Typ 75 6500 K 80 70 --- 75 5700 K 80 70 5000 K 80 90 --- 75 --- 95 2-Step Order Code 4-Step Order Code Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* M2 1380 1563 M4 1485 1682 N2 1590 1710 CXA1512-0000-000N00N265F K4 1290 1461 CXA1512-0000-000N0HK465F M2 1380 1563 M4 1485 1685 M2 1380 1563 M4 1485 1682 N2 1590 1710 CXA1512-0000-000N00N257F K4 1290 1461 CXA1512-0000-000N0HK457F M2 1380 1563 M4 1485 1685 M2 1380 1563 M4 1485 1682 N2 1590 1710 CXA1512-0000-000N00N250H CXA1512-0000-000N00N250F K4 1290 1461 CXA1512-0000-000N0HK450H CXA1512-0000-000N0HK450F M2 1380 1563 M4 1485 1685 J4 1120 1269 K2 1200 1359 K4 1290 1461 Chromaticity Region Chromaticity Region CXA1512-0000-000N00M265F 65F 65F CXA1512-0000-000N00M465F CXA1512-0000-000N0HM265F CXA1512-0000-000N0HM465F CXA1512-0000-000N00M257F 57F 57F CXA1512-0000-000N00M457F CXA1512-0000-000N0HM257F CXA1512-0000-000N0HM457F CXA1512-0000-000N00M250H 50H 50H CXA1512-0000-000N00M450H CXA1512-0000-000N0HM250H CXA1512-0000-000N00M250F 50F 50H CXA1512-0000-000N0HM450H CXA1512-0000-000N0UK250H CXA1512-0000-000N0UK450H CXA1512-0000-000N0HM250F CXA1512-0000-000N0HM450F CXA1512-0000-000N0UJ450H 50H CXA1512-0000-000N00M450F CXA1512-0000-000N0UJ450F 50F CXA1512-0000-000N0UK250F CXA1512-0000-000N0UK450F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 3 XLamp CXA1512 LED Flux Characteristics, EasyWhite Order Codes and Bins (If = 350 mA, TJ = 85 °C) Continued Base Order Codes Min. Luminous Flux @ 350 mA CRI CCT Range Min 70 4000 K 80 90 80 Typ 75 --- 95 --- 3500 K 93 80 3000 K 90 93 95 --- --- 95 2-Step Order Code 4-Step Order Code Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* K4 1290 1461 M2 1380 1563 M4 1485 1682 CXA1512-0000-000N00M440H CXA1512-0000-000N00M440F K2 1200 1359 CXA1512-0000-000N0HK240H CXA1512-0000-000N0HK240F K4 1290 1461 M2 1380 1563 CXA1512-0000-000N0HM240H CXA1512-0000-000N0HM240F J2 1040 1178 CXA1512-0000-000N0UJ240H CXA1512-0000-000N0UJ240F J4 1120 1269 K2 1200 1359 CXA1512-0000-000N0UK240H CXA1512-0000-000N0UK240F K2 1200 1359 CXA1512-0000-000N00K235H CXA1512-0000-000N00K235F K4 1290 1461 M2 1380 1563 CXA1512-0000-000N00M235H CXA1512-0000-000N00M235F H4 970 1099 CXA1512-0000-000N0YH435H CXA1512-0000-000N0YH435F J2 1040 1178 J4 1120 1269 Chromaticity Region Chromaticity Region CXA1512-0000-000N00K440H 40H 40H 40H 35H 35H CXA1512-0000-000N00M240H CXA1512-0000-000N0HK440H CXA1512-0000-000N0UJ440H CXA1512-0000-000N00K435H CXA1512-0000-000N0YJ235H CXA1512-0000-000N00K440F 40F 40F 40F 35F 35F CXA1512-0000-000N0YJ435H CXA1512-0000-000N00M240F CXA1512-0000-000N0HK440F CXA1512-0000-000N0UJ440F CXA1512-0000-000N00K435F CXA1512-0000-000N0YJ235F CXA1512-0000-000N0YJ435F K2 1200 1359 K4 1290 1461 CXA1512-0000-000N00K230H M2 1380 1563 CXA1512-0000-000N00M230H CXA1512-0000-000N00M230F H2 900 1019 CXA1512-0000-000N0UH230H CXA1512-0000-000N0UH230F H4 970 1099 J2 1040 1178 CXA1512-0000-000N0UJ230H CXA1512-0000-000N0UJ230F H2 900 1019 CXA1512-0000-000N0YH230H CXA1512-0000-000N0YH230F H4 970 1099 J2 1040 1178 30H 30H 30H CXA1512-0000-000N00K430H CXA1512-0000-000N0UH430H CXA1512-0000-000N0YH430H CXA1512-0000-000N0YJ230H CXA1512-0000-000N00K230F 30F 30F 30F CXA1512-0000-000N00K430F CXA1512-0000-000N0UH430F CXA1512-0000-000N0YH430F CXA1512-0000-000N0YJ230F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 4 XLamp CXA1512 LED Flux Characteristics, EasyWhite Order Codes and Bins (If = 350 mA, TJ = 85 °C) Continued Base Order Codes Min. Luminous Flux @ 350 mA CRI CCT Range Min 80 2700 K 90 93 Typ --- --- 95 2-Step Order Code 4-Step Order Code Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* J4 1120 1269 K2 1200 1359 K4 1290 1461 CXA1512-0000-000N00K427H CXA1512-0000-000N00K427F G4 840 952 CXA1512-0000-000N0UG427H CXA1512-0000-000N0UG427F H2 900 1019 H4 970 1099 CXA1512-0000-000N0UH427H CXA1512-0000-000N0UH427F G4 840 952 CXA1512-0000-000N0YG427H CXA1512-0000-000N0YG427F H2 900 1019 H4 970 1099 Chromaticity Region Chromaticity Region CXA1512-0000-000N00J427H 27H 27H 27H CXA1512-0000-000N00K227H CXA1512-0000-000N0UH227H CXA1512-0000-000N0YH227H CXA1512-0000-000N0YH427H CXA1512-0000-000N00J427F 27F 27F 27F CXA1512-0000-000N00K227F CXA1512-0000-000N0UH227F CXA1512-0000-000N0YH227F CXA1512-0000-000N0YH427F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 5 XLamp CXA1512 LED Flux Characteristics, ANSI White Order Codes and Bins (If = 350 mA, TJ = 85 °C) The following tables provide order codes for XLamp CXA1512 LEDs. For a complete description of the order code nomenclature, please reference Bin and Order Code Formats (page 16). CCT Range Min 70 Typ 75 6500 K 80 70 --- 75 5700 K 80 70 5000 K Base Order Codes Min. Luminous Flux @ 350 mA CRI 80 90 --- 75 --- 95 Chromaticity Regions Order Code Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* M2 1380 1563 M4 1485 1685 N2 1590 1710 CXA1512-0000-000N00N20E1 K4 1290 1461 CXA1512-0000-000N0HK40E1 M2 1380 1563 M4 1485 1685 CXA1512-0000-000N0HM40E1 M2 1380 1563 CXA1512-0000-000N00M20E2 M4 1485 1685 N2 1590 1710 CXA1512-0000-000N00N20E2 K4 1290 1461 CXA1512-0000-000N0HK40E2 M2 1380 1563 M4 1485 1685 CXA1512-0000-000N0HM40E2 M2 1380 1563 CXA1512-0000-000N00M20E3 M4 1485 1685 N2 1590 1710 CXA1512-0000-000N00N20E3 K4 1290 1461 CXA1512-0000-000N0HK40E3 M2 1380 1563 M4 1485 1685 CXA1512-0000-000N0HM40E3 J4 1120 1269 CXA1512-0000-000N0UJ40E3 K2 1200 1359 K4 1290 1461 CXA1512-0000-000N00M20E1 1A0, 1B0, 1C0, 1D0 1A0, 1B0, 1C0, 1D0 2A0, 2B0, 2C0, 1D0 2A0, 2B0, 2C0, 1D0 3A0, 3B0, 3C0, 3D0 3A0, 3B0, 3C0, 3D0 3A0, 3B0, 3C0, 3D0 CXA1512-0000-000N00M40E1 CXA1512-0000-000N0HM20E1 CXA1512-0000-000N00M40E2 CXA1512-0000-000N0HM20E2 CXA1512-0000-000N00M40E3 CXA1512-0000-000N0HM20E3 CXA1512-0000-000N0UK20E3 CXA1512-0000-000N0UK40E3 Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 6 XLamp CXA1512 LED Flux Characteristics, ANSI White Order Codes and Bins (If = 350 mA, TJ = 85 °C) Continued CCT Range Min 70 4000 K 80 90 80 Typ 75 --- 95 --- 3500 K 93 80 3000 K Base Order Codes Min. Luminous Flux @ 350 mA CRI 90 93 95 --- --- 95 Chromaticity Regions Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* K4 1290 1461 Order Code CXA1512-0000-000N00K40E5 M2 1380 1563 M4 1485 1682 5A0, 5B0, 5C0, 5D0 CXA1512-0000-000N00M40E5 K2 1200 1359 CXA1512-0000-000N0HK20E5 K4 1290 1461 M2 1380 1563 CXA1512-0000-000N0HM20E5 J2 1040 1178 CXA1512-0000-000N0UJ20E5 J4 1120 1269 K2 1200 1359 CXA1512-0000-000N0UK20E5 K2 1200 1359 CXA1512-0000-000N00K20E6 K4 1290 1461 M2 1380 1563 CXA1512-0000-000N00M20E6 H4 970 1099 CXA1512-0000-000N0YH40E6 J2 1040 1178 J4 1120 1269 CXA1512-0000-000N0YJ40E6 K2 1200 1359 CXA1512-0000-000N00K20E7 K4 1290 1461 M2 1380 1563 CXA1512-0000-000N00M20E7 H2 900 1019 CXA1512-0000-000N0UH20E7 H4 970 1099 J2 1040 1178 CXA1512-0000-000N0UJ20E7 H2 900 1019 CXA1512-0000-000N0YH20E7 H4 970 1099 J2 1040 1178 5A0, 5B0, 5C0, 5D0 5A0, 5B0, 5C0, 5D0 6A0, 6B0, 6C0, 6D0 6A0, 6B0, 6C0, 6D0 7A0, 7B0, 7C0, 7D0 7A0, 7B0, 7C0, 7D0 7A0, 7B0, 7C0, 7D0 CXA1512-0000-000N00M20E5 CXA1512-0000-000N0HK40E5 CXA1512-0000-000N0UJ40E5 CXA1512-0000-000N00K40E6 CXA1512-0000-000N0YJ20E6 CXA1512-0000-000N00K40E7 CXA1512-0000-000N0UH40E7 CXA1512-0000-000N0YH40E7 CXA1512-0000-000N0YJ20E7 Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 7 XLamp CXA1512 LED Flux Characteristics, ANSI White Order Codes and Bins (If = 350 mA, TJ = 85 °C) Continued CCT Range Min 80 2700 K Base Order Codes Min. Luminous Flux @ 350 mA CRI 90 93 Typ --- --- 95 Chromaticity Regions Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* J4 1120 1269 Order Code CXA1512-0000-000N00J40E8 K2 1200 1359 K4 1290 1461 8A0, 8B0, 8C0, 8D0 CXA1512-0000-000N00K40E8 G4 840 952 CXA1512-0000-000N0UG40E8 H2 900 1019 H4 970 1099 CXA1512-0000-000N0UH40E8 G4 840 952 CXA1512-0000-000N0YG40E8 H2 900 1019 H4 970 1099 8A0, 8B0, 8C0, 8D0 8A0, 8B0, 8C0, 8D0 CXA1512-0000-000N00K20E8 CXA1512-0000-000N0UH20E8 CXA1512-0000-000N0YH20E8 CXA1512-0000-000N0YH40E8 Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 8 XLamp CXA1512 LED Relative Spectral Power Distribution Relative Spectral Power Distribution (If = 350 ma, Tj = 85 °C) The following graph is the result of a series of pulsed measurements at 350 mA and TJ = 85 °C. 100% Relative Spectral Power 90% 80% 70% 60% 5000K, 70 CRI 50% 4000K, 70 CRI 40% 3000K, 80 CRI 30% 3000K, 93 CRI 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Electrical Characteristics The following graph is the result of a series of steady-state measurements. 41 40 Voltage (V) 39 Tc = 25 °C 38 Tc = 55 °C Tc = 85 °C 37 Tc = 105 °C 36 35 34 200 300 400 500 600 Current (mA) Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 9 XLamp CXA1512 LED Relative Luminous Flux The relative luminous flux values provided below are the ratio of: • Measurements of CXA1512 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 350 mA at TJ = 85 °C. For example, at steady-state operation of Tc = 25 °C, IF = 500 mA, the relative luminous flux ratio is 140% in the chart below. A CXA1512 LED that measures 1200 lm during binning will deliver 1680 lm (1200 * 1.4) at steady-state operation of Tc = 25 °C, IF = 500 mA. 160% Relative Luminous Flux 140% 120% Tc = 25 °C 100% Tc = 55 °C 80% Tc = 85 °C Tc = 105 °C 60% 40% 20% 0% 200 300 400 500 600 Current (mA) Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 10 Far Field XLamp CXA1512 LED Typical Spatial Distribution Relative Luminous Intensity 100% 80% 60% 40% 20% -90 -70 -50 -30 0% -10 10 30 50 70 90 Angle (º) Performance Groups - Brightness (If = 350 mA, Tj = 85 °C) XLamp CXA1512 LEDs are tested for luminous flux and placed into one of the following bins. Group Code Min. Luminous Flux @ 350 mA Max. Luminous Flux @ 350 mA G4 840 900 H2 900 970 H4 970 1040 J2 1040 1120 J4 1120 1200 K2 1200 1290 K4 1290 1380 M2 1380 1485 M4 1485 1590 N2 1590 1710 Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 11 XLamp CXA1512 LED Performance Groups - Chromaticity (Tj = 85 °C) XLamp CXA1512 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 4-Step Code 65F 57F 50F 40F 35F 30F 27F CCT 6500 K 5700 K 5000 K 4000 K 3500 K 3000 K 2700 K x y 0.3253 0.3325 0.3249 0.3439 0.3331 0.3514 0.3330 0.3393 0.3097 0.3196 0.3079 0.3297 0.3164 0.3382 EasyWhite Color Temperatures – 2-Step 0.3176 0.3275 Code 0.3407 0.3415 0.3499 0.3654 0.3484 0.3744 0.3782 0.3837 0.3912 0.3917 0.3863 x y 0.3459 0.3429 0.3507 0.3586 0.3434 0.3571 0.3475 0.3604 0.3521 0.3469 0.3539 0.3685 0.3784 0.3741 0.3804 0.3818 0.3867 0.3857 0.3758 0.3844 0.3778 0.3981 0.3800 0.4030 0.3857 0.4040 0.3966 0.4061 0.3941 0.4186 0.4037 0.4132 0.3976 0.4116 0.3865 0.4099 0.3890 0.4242 0.3919 0.4291 0.3973 0.4322 0.4096 0.4333 0.4062 0.4449 0.4141 0.4395 0.4084 0.4359 0.3960 0.4351 0.3994 0.4475 0.3994 0.4528 0.4046 0.4573 0.4178 0.4578 0.4138 0.4695 0.4207 0.4638 0.4152 0.4589 0.4021 0.4586 0.4060 50H 40H 35H 30H 27H CCT 5000 K 4000 K 3500 K 3000 K 2700 K Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 12 XLamp CXA1512 LED Performance Groups - Chromaticity (Tj = 85 °C) - Continued ANSI White Bins Code Bin Code CCT 1A0 1B0 0E1 6500 K 1C0 1D0 ANSI White Bins x y 0.3048 0.3130 0.3144 0.3186 CCT Bin Code 3A0 3B0 0E3 5000 K 3C0 3D0 CCT Bin Code x y 0.3207 0.3215 0.3350 0.3290 0.3290 0.3417 0.3290 0.3300 2A0 0.3068 0.3113 0.3222 0.3243 0.3028 0.3304 0.3207 0.3462 0.3115 0.3391 0.3290 0.3538 0.3130 0.3290 0.3290 0.3417 0.3048 0.3207 0.3215 0.3350 0.3115 0.3391 0.3290 0.3538 0.3205 0.3481 0.3376 0.3616 0.3213 0.3373 0.3371 0.3490 0.3130 0.3290 0.3290 0.3417 0.3130 0.3290 0.3290 0.3417 0.3213 0.3373 0.3371 0.3490 0.3221 0.3261 0.3366 0.3369 0.3144 0.3186 0.3290 0.3300 ANSI White Bins Code Code 2B0 0E2 5700 K 2C0 2D0 ANSI White Bins x y .3371 .3490 .3451 .3554 .3440 .3427 .3366 .3369 .3376 .3463 .3451 .3554 .3371 .3490 .3463 .3687 .3551 .3760 .3533 .3620 .3451 .3554 Code CCT Bin Code ANSI White Bins Bin Code .3578 .3889 .3690 .3702 .3722 .3941 .3848 .3825 .3798 .4080 .3916 .3783 .3646 .4017 .3751 .3616 .3702 .3722 .3941 .3848 .3687 .3736 .3874 .3996 .4015 .3869 .3958 .4146 .4089 .3825 .3798 .4080 .3916 .3825 .3798 .4080 .3916 .4146 .4089 0E5 4000 K 5C0 .3670 CCT y 5B0 y Code x 5A0 x 6A0 6B0 0E6 3500 K .3869 .3958 .4006 .4044 .4299 .4165 .3950 .3875 .4221 .3984 6C0 .3451 .3554 .3783 .3646 .4017 .3751 .3533 .3620 .3825 .3798 .4080 .3916 .3515 .3487 .4221 .3984 .3440 .3427 .4147 .3814 5D0 .3950 .3875 .3898 .3716 6D0 Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 13 XLamp CXA1512 LED Performance Groups - Chromaticity (Tj = 85 °C) - Continued ANSI White Bins Code Bin Code CCT 7A0 7B0 0E7 3000 K 7C0 7D0 ANSI White Bins x y .4147 .4221 Code Bin Code CCT x y .3814 .4373 .3893 .3984 .4465 .4071 .4582 .4099 8A0 .4342 .4028 .4259 .3853 .4483 .3919 .4221 .3984 .4465 .4071 .4299 .4165 .4562 .4260 .4430 .4212 .4687 .4289 .4342 .4028 .4582 .4099 .4342 .4028 .4582 .4099 .4430 .4212 .4687 .4289 .4813 .4319 8B0 0E8 2700 K 8C0 .4562 .4260 .4465 .4071 .4700 .4126 .4259 .3853 .4483 .3919 .4342 .4028 .4582 .4099 .4465 .4071 .4700 .4126 .4593 .3944 .4373 8D0 .3893 Cree EasyWhite Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) 0.44 2700K ANSI C76.377 Quadrangle EasyWhite 4-step EasyWhite 2-step 0.43 3000K 0.42 3500K 0.41 4000K 0.40 4500K 0.39 5000K 0.38 CCy 0.37 5700K 0.36 6500K 0.35 0.34 0.33 0.32 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.31 CCx Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 14 XLamp CXA1512 LED Cree ANSI White Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) 0.45 ANSI C76.377 Quadrangle 0.44 2700K 3000K 0.43 0.42 3500K 0.41 0.40 6B 5C 5D 0.37 5700K 0.36 7D 7A 8A 8C 8D 6D 5B 5000K 0.38 CCy 6C 4500K 0.39 6A 5A 3C 3B 6500K 0.35 1C 8000K 1B 0.32 3D 2C 2B 0.34 0.33 7B 4000K 8B 7C 3A 2D 2A 1D 1A 0.31 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.30 CCx Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 15 XLamp CXA1512 LED Bin and Order Code Formats Bin codes and order codes are configured as follows: Order CodeBin Code Series = CXA15 Series = CXA15 Internal code Chromaticity bin Vf class: N0 = 37-V class CRI Specification 0 = Standard CRI H = 80 min CRI U = 90 min CRI 6 NOTICE Y = 93 min CRI Internal code 5 SSSSSCC-WWW-FF-GGR-AAAAA 4 3 CRI Specification B = 70 min CRI H = 80 min CRI U = 90 min CRI Y = 93 min CRI CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND SSSSSCC-HHHH-HHHGGNNNNNN CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. Kit code Vf class: N0 = 37-V class D REV Flux bin Performance class Performance class Mechanical Dimensions Dimensions are in mm. 15.85 ±0.2 Tolerances unless otherwise specified: .x + .10 1.3 C 2.6 Tc 3.3 1.15 ± .15 1.3 .xx + .03 1.3 .xxx + .010 x° + 1° 2.6 15.85 ±0.2 B 5.5 R .5 4X 8.9 ± 0.2 10.5 ±0.2 2.6 1.3 2.6 0.55 ± 0.1 TOLERANCE DIMENSION .X ± .XX ± .XXX ± X° ± 1.3 A Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, registered trademarks of Cree, Inc.. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 XLamp® and EasyWhite® are .XXX ± .125 X° ± .5 ° THIRD ANGLE PROJECTION FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° 16 SURFACE FINISH: 1.6 XLamp CXA1512 LED Thermal Design The CXA family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to ensure the CXA LED is being operated within its designed limits. Please refer to page 2 for the Operating Limit specification. Cree has measured the temperature at the bottom of the package, commonly referred to as the solder point (TSP), and found this value to be equivalent to the temperature at the Tc location at the top of the package once the LED has reached thermal equilibrium. There is no need to calculate for TJ inside the package, as the thermal management design process, specifically from TSP to ambient (Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please refer to the XLamp Thermal Management application note at www.cree.com/xlamp_app_notes/thermal_management. For CXA soldering recommendations and more information on thermal interface materials (TIM) and connection methods, please refer to the Cree XLamp CXA Family LEDs soldering and handling document at www.cree.com/xlamp_app_notes/CXA_SH. To keep the CXA1512 LED at or below the maximum rated Tc, the case to ambient temperature thermal resistance (R_c-a) must be at or below the maximum R_c-a R_j-c R_j-c Tc Tc value shown on the following graph, depending on the operating environment. The y‑axis in the graph is a base 10 logarithmic scale. As the figure at right shows, the R_c-a value is the sum of the thermal resistance of R_tim R_c-a the TIM (R_tim) plus the thermal resistance of the heat sink (R_hs). R_hs CXA1512 Ta Ta 100.00 Maximum R_c-a 10.00 Ta = 25 °C Ta = 55 °C 1.00 Ta = 85 °C Ta = 105 °C 0.10 0.01 200 300 400 500 600 Current (mA) Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 17 XLamp CXA1512 LED Notes Lumen Maintenance Projections Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document at www.cree.com/xlamp_app_notes/LM80_results. Please read the XLamp Long-Term Lumen Maintenance application note at www.cree.com/xlamp_app_notes/lumen_ maintenance for more details on Cree’s lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.. 18 XLamp CXA1512 LED Packaging Cree CXA1512 LEDs are packaged in trays of 20. Five trays are sealed in an anti-static bag and placed inside a carton, 6 5 4 3 2 for a total of 100 LEDs per carton. Each carton contains 100 LEDs from the same performance bin. NOTICE FIDENTIAL. THIS PLOT AND THE INFORMATION D WITHIN ARE THE PROPRIETARY AND TIAL INFORMATION OF CREE, INC. THIS PLOT E COPIED, REPRODUCED OR DISCLOSED TO ANY IZED PERSON WITHOUTTHE WRITTEN CONSENT C. Dimensions are in inches. Tolerances: .x + .1 .xx + .05 5.875 R.375 .xxx + .005 x° + 1° 6 5 4 3 NOTICE FIDENTIAL. THIS PLOT AND THE INFORMATION D WITHIN ARE THE PROPRIETARY AND TIAL INFORMATION OF CREE, INC. THIS PLOT E COPIED, REPRODUCED OR DISCLOSED TO ANY IZED PERSON WITHOUTTHE WRITTEN CONSENT C. 2 1 .875 5.875 R.375 5.875 .875 5.875 BAG .38 .875 LABEL WITH CREE BIN CODE, QTY, LOT# PATENT LABEL IS LOCATED ON UNDERSIDE OF CARTON BAG .38 .875 LABEL WITH CREE BIN CODE, QTY, LOT# LABEL WITH CREE BIN CODE, QTY, LOT# PATENT LABEL IS LOCATED ON UNDERSIDE OF CARTON LABEL WITH CREE BIN CODE, QTY, LOT# UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. TOLERANCE UNLESS SPECIFIED: LABEL WITH CREE BIN CODE, QTY, LOT# .X ± .XX ± .XXX ± X° ± THIRD ANGLE PROJECTION 6 5 3.X .XX 4 THIRD ANGLE PROJECTION Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change registered trademarks of Cree, Inc.. 5 4 3 ± ± .XXX ± X° ± 0.1 .05 .005 1° FOR SHEET METAL PARTS ONLY .X ± .06 ® without notice. Cree , the .XX ± .03 .XXX ± .010 X° ± 2° APPROVED DATE DATE APPROVED DATE TITLE CXA1 MATERIAL FOR SHEET METAL PARTS ONLY DRAWN BY ± .06 DATE UNLESS OTHERWISE SPECIFIED .X .XX ± .03 DIMENSIONS ARE IN CHECK ± .XXX .010 DATE MILLIMETERS & BEFORE FINISH. ± 2° TOLERANCE UNLESS SPECIFIED: X° LABEL WITH CREE BIN CODE, QTY, LOT# 6 0.1 .05 .005 1° DRAWN BY CHECK SIZE FINAL PROTECTIVE FINISH DRAW C CX 4600 Silicon Dri Durham, N.C 27 SCALE Phone (919) 361 0.500 Fax (919) 313-5 2 DATE TITLE CXA15XX_DATASHEET MATERIAL SIZE C DRAWING NO. ® ® CXA15XX_DATASHEET_BAG2013 FINAL PROTECTIVE FINISHXLamp Cree logo, and EasyWhite are SCALE 2 SHEET 0.500 19 1 OF