FKC08W SERIES 8 WATTS DC-DC CONVERTER FEATURES • RAILWAY APPLICATION • 4:1 ULTRA WIDE INPUT VOLTAGE RANGE : 9 ~ 36VDC, 18 ~ 75VDC AND 43 ~ 160VDC • 8 WATTS OUTPUT POWER • OUTPUT CURRENT UP TO 2.4A • STANDARD 1.25 X 0.80 X 0.40 INCH AND 24 PIN DIP PACKAGE • HIGH EFFICIENCY UP TO 88% • FIVE-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY (300kHz) • CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC • SAFETY MEETS UL60950-1, EN60950-1, IEC60950-1 AND EN50155 • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU OPTIONS APPLICATIONS Railway System Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment SMD TYPE DESCRIPTION The FKC08W series offer 8 watts of output power from a package in an IC compatible 24pin DIP configuration. FKC08W series have 4:1 ultra wide input voltage of 9-36, 18-75VDC and 43-160VDC. The FKC08W have features 1600VDC of isolation, short circuit protection and as well as five sided shielding. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS Output power Voltage accuracy Minimum load Line regulation INPUT SPECIFICATIONS 8 Watts, max. ± 1% 0% ± 0.2% LL to HL at Full Load No Load to Full Load Load regulation 10% Load to 90% Load Cross regulation (Dual) Ripple and noise Single (DIP) Single (SMD) Dual (SMD,DIP) Single (DIP) Single (SMD) Dual (SMD,DIP) Asymmetrical load 25% / 100% FL ± 0.5% ± 1% ± 1% ± 0.3% ± 0.8% ± 0.8% ± 5% 20MHz bandwidth See table ±0.02% / ºC, max. Temperature coefficient Transient response recovery time 25% load step change 3.3VDC output Over voltage 5.0VDC output protection 12VDC output (only single) 15VDC output Over load protection % of FL at nominal input Short circuit protection 250µs 3.9VDC 6.2VDC 15VDC 18VDC 150% Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency Isolation voltage See table Input to Output 1600VDC, min. 1minute Input(Output) to Case DIP 1600VDC, min. 1minute SMD 1000VDC, min. 1minute Isolation resistance 500VDC 9 10 ohms, min. Input voltage range 24VDC nominal input 48VDC nominal input 110VDC nominal input 9 ~ 36VDC 18 ~ 75VDC 43 ~ 160VDC Pi type Input filter 24VDC input 48VDC input 110VDC input Input reflected ripple current 50VDC 100ms, max. 100VDC 100ms, max. 170VDC 100ms, max. 20mAp-p Input surge voltage Nominal input and Power up 450ms constant resistive load 24VDC input 9VDC Start-up voltage 48VDC input 18VDC 110VDC input 43VDC 24VDC input 8VDC Shutdown voltage 48VDC input 16VDC 110VDC input 42VDC Remote ON/OFF (Note 5) DC-DC ON Open or 3.0V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V Input current of Remote control pin Nominal input -0.5mA ~ 0.5mA Remote off state input current Nominal input 2.5mA Start up time ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature (Note 6) Vo:5V,12V,15V ±12V,±15V -40ºC ~ +78ºC (without derating) +78ºC ~ +105ºC (with derating) -40ºC ~ +70ºC (without derating) +70ºC ~ +105ºC (with derating) +105ºC Vo:3.3V;±5V Maximum case temperature Storage temperature range Thermal impedance -55ºC ~ +125ºC Nature convection 20ºC/Watt Isolation capacitance 1500pF, max. Thermal shock EN61373, MIL-STD-810F Switching frequency Design meet safety standard Case material 300kHz±10%. Vibration EN61373, MIL-STD-810F IEC60950-1, UL60950-1, EN60950-1, EN50155 Nickel-coated copper Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) 18g (0.62oz) Dimensions Weight MTBF (Note 1) Page 1 of 3 MIL-HDBK-217F 2.832 x 106 hrs Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 7) ESD EN55022, EN55011 EN61000-4-2 Radiated immunity EN61000-4-3 Fast transient (Note 8) EN61000-4-4 Surge (Note 8) EN61000-4-5 Conducted immunity EN61000-4-6 www.pduke.com Class A, Class B Air Contact ± 8kV ± 6kV 20 V/m ± 2kV ± 2kV 10 Vr.m.s VER: 15 Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A 2013/09/13 FKC08W SERIES 8 WATTS DC-DC CONVERTER (4) Output Current (2) (3) (4) No load Input Current Eff (%) 50mVp-p 40mA 85 1330µF 50mVp-p 40mA 87 1330µF 666mA 50mVp-p 25mA 86 288µF 533mA 50mVp-p 25mA 86 200µF ± 800mA 50mVp-p 20mA 84 ± 900µF ± 333mA 50mVp-p 25mA 86 ± 133µF Model Number Input Range Output Voltage Output Min. Load Max. Load Ripple & Noise FKC08-24S3P3W 9 ~ 36 VDC 3.3 VDC 0mA 2400mA FKC08-24S05W 9 ~ 36 VDC 5 VDC 0mA 1600mA FKC08-24S12W 9 ~ 36 VDC 12 VDC 0mA FKC08-24S15W 9 ~ 36 VDC 15 VDC 0mA FKC08-24D05W 9 ~ 36 VDC ± 5 VDC 0mA FKC08-24D12W 9 ~ 36 VDC ± 12 VDC 0mA Capacitor Load max FKC08-24D15W 9 ~ 36 VDC ± 15 VDC 0mA ± 267mA 50mVp-p 25mA 86 ± 90µF FKC08-48S3P3W 18 ~ 75 VDC 3.3 VDC 0mA 2400mA 50mVp-p 20mA 85 1330µF FKC08-48S05W 18 ~ 75 VDC 5 VDC 0mA 1600mA 50mVp-p 20mA 87 1330µF FKC08-48S12W 18 ~ 75 VDC 12 VDC 0mA 666mA 50mVp-p 13mA 87 288µF FKC08-48S15W 18 ~ 75 VDC 15 VDC 0mA 533mA 50mVp-p 13mA 88 200µF FKC08-48D05W 18 ~ 75 VDC ± 5 VDC 0mA ± 800mA 50mVp-p 10mA 84 ± 900µF FKC08-48D12W 18 ~ 75 VDC ± 12 VDC 0mA ± 333mA 50mVp-p 13mA 87 ± 133µF FKC08-48D15W 18 ~ 75 VDC ± 15 VDC 0mA ± 267mA 50mVp-p 13mA 87 ± 90µF FKC08-110S3P3W 43 ~ 160 VDC 3.3 VDC 0mA 2400mA 75mVp-p 8mA 84 1330µF FKC08-110S05W 43 ~ 160 VDC 5 VDC 0mA 1600mA 75mVp-p 8mA 85 1330µF FKC08-110S12W 43 ~ 160 VDC 12 VDC 0mA 666mA 75mVp-p 4mA 86 288µF FKC08-110S15W 43 ~ 160 VDC 15 VDC 0mA 533mA 75mVp-p 4mA 86 200µF FKC08-110D05W 43 ~ 160 VDC ± 5 VDC 0mA ± 800mA 75mVp-p 5mA 82 ± 900µF FKC08-110D12W 43 ~ 160 VDC ± 12 VDC 0mA ± 333mA 75mVp-p 5mA 85 ± 133µF FKC08-110D15W 43 ~ 160 VDC ± 15 VDC 0mA ± 267mA 75mVp-p 5mA 85 ± 90µF Note 1. 2. 3. 4. 5. 6. MIL-HDBK-217F @Ta=25 ºC, Full load. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum input and constant resistive load. The ON/OFF control pin voltage is referenced to –INPUT. Operating ambient temperature: Converter can meet the railway T2 and TX temperature requirement. T2 : -40 ºC ~ +70 ºC as all models, TX : -40 ºC ~ +85 ºC as power derating to 55% output power. 7. The FKC08W series standard module meets EN55022 Class A and Class B with external components. For more detail information, please contact with P-DUKE. 8. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: : 24Vin/48Vin Nippon chemi-con KY series, 220µF/100V : 110 Vin Nippon chemi-con KXJ series, 150µF/200V CAUTION: This power module is not internally fused. An input line fuse must always be used. Page 2 of 3 www.pduke.com VER: 15 2013/09/13 FKC08W SERIES 8 WATTS MECHANICAL DRAWING DC-DC CONVERTER ： DIP TYPE SMD TYPE 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1) DIP PIN CONNECTION SMD PIN CONNECTION PIN 1 2 3 SINGLE CTRL -INPUT -INPUT DUAL CTRL -INPUT -INPUT PIN SINGLE DUAL 23 22 +INPUT +INPUT +INPUT +INPUT 9 11 NC NC COMMON -OUTPUT 16 14 -OUTPUT +OUTPUT COMMON +OUTPUT Page 3 of 3 PIN 1 2 3 SINGLE CTRL -INPUT -INPUT DUAL CTRL -INPUT -INPUT PIN SINGLE DUAL 23 22 +INPUT +INPUT +INPUT +INPUT 9 11 Others NC NC NC COMMON -OUTPUT NC 16 14 -OUTPUT +OUTPUT COMMON +OUTPUT www.pduke.com VER: 15 2013/09/13