Inductor ELECTRONICS INC. EPA4222G-LF • UL 94V-0 Recognized Components • UL 1446 Class F Insulation System • Operating Temperature : -40°C to +85°C • Storage Temperature : -40°C to +125°C • Lead Free Electrical Parameters @ 25° C Inductance (mH ± 6%) Turns Ratio (± 8%) @ 10 KHz, 0.1 Vrms Hipot @ 10 Hz, 0.1 Vrms DCR (Ω Max.) @ 50 Hz, 2 seconds Pri. Sec. 6.0 (Idc = 100 mA) 6.1 1:1 1800 Vac 500 Vrms 4.35 4.35 Pins 1-5 Pins 6-10 Pins 1-5:6-10 Pri. to Sec. Wdgs. to Core Pins 1-5 Pins 6-10 Package Mark on Top : PCA EPA4222G-LF Date Code .551 Max. (14.00) Pin 1 I.D. Schematic Epoxy 1 6 5 10 Epoxy .570 Max. (14.50) .020 Ref. (.500) .098 (2.50) 1 5 .040 Ref. (1.00) Coplanarity : .004 Max (.100) .709 Max. (18.00) 10 6 .392 (10.00) Notes : EPA4222G-LF 1. Lead Finish Hot Dip Sn or (SnCu) 2. Peak Solder Rating 245°C 3. Moisture Sensitive Levels MSL = 1 4. Weight 7.3 grams 5. Packaging Information (Tape & Reel) 150 pieces/reel Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSA4222G-LF Rev. 2 1/13/09 HW TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com