GPA801 THRU GPA807 8.0 AMPS. Glass Passivated Rectifiers Voltage Range 50 to 1000 Volts Current 8.0 Amperes TO-220A Features .185(4.70) .175(4.44) Low forward voltage drop High current capability High reliability High surge current capability .412(10.5) MAX .113(2.87) .103(2.62) .27(6.86) .23(5.84) .594(15.1) .587(14.9) Mechanical Data .055(1.40) .045(1.14) DIA .154(3.91) .148(3.74) PIN1 2 .16(4.06) .14(3.56) Cases: TO-220A molded plastic Epoxy: UL 94V-0 rate flame retardant Terminals: Leads solderable per MIL-STD202, Method 208 guaranteed Polarity: As marked High temperature soldering guaranteed: 260℃/10 seconds .16”,(4.06mm) from case. Weight: 2.24 grams .56(14.22) .53(13.46) .11(2.79) .10(2.54) .037(0.94) .027(0.68) .025(0.64) .014(0.35) .205(5.20) .195(4.95) PIN 1 PIN 2 CASE Case Positive Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol GPA GPA Type Number 801 802 Maximum Recurrent Peak Reverse Voltage 50 100 VRRM Maximum RMS Voltage 35 70 VRMS Maximum DC Blocking Voltage 50 100 VDC GPA GPA GPA GPA GPA Units 803 804 805 806 807 200 140 200 400 280 400 600 420 600 800 1000 560 700 800 1000 V V V Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TC = 100℃ I(AV) 8.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 150 A VF 1.1 V IR 5.0 uA Maximum Instantaneous Forward Voltage @8.0A Maximum DC Reverse Current @ TC=25℃ at Rated DC Blocking Voltage Typical Junction Capacitance ( Note 1) 50 pF ℃/W 2.5 Operating and Storage Temperature Range TJ ,TSTG ℃ - 65 to + 150 Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 2. Thermal Resistance from Junction to Case Mounted on Heatsink size 2” x 3” x 0.25” Al-Plate Typical Thermal Resistance (Note 2) Cj RθJC - 546 - RATINGS AND CHARACTERISTIC CURVES (GPA801 THRU GPA807) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 175 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 10 8 6 4 Single Phase Half Wave 60Hz Resistive of Inductive Load 2 0 150 125 100 8.3ms Single Half Sine Wave JEDEC Method 75 50 25 0 0 50 100 1 150 2 5 o CASE TEMPERATURE. ( C) 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4- TYPICAL REVERSE CHARACTERISTICS 400 100 200 INSTANTANEOUS REVERSE CURRENT. ( A) 40 40 20 10 4 Tj=25oC Pulse Width=300 s 1% Duty Cycle 2 1 0.4 0.2 0.1 10 Tj=125 0C 4 2 1 Tj=25 0C 0.4 0.2 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.1 2.0 FORWARD VOLTAGE. (V) 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE 120 JUNCTION CAPACITANCE.(pF) INSTANTANEOUS FORWARD CURRENT. (A) 100 100 80 60 40 f=10 MHz Vsig 50Mvp-p Tj=25 0C 20 0 0.1 0.5 1 4 10 40 REVERSE VOLTAGE. (V) - 547 - 100 400 1000