SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD MMF Series 200W Surface Mount Transient Voltage Suppressors Features l Peak power dissipation 200W @10 x 1000 us Pulse l Low profile package. SOD-123FL l Excellent clamping capability. l Glass passivated junction. l Fast response time: typically less than 1ns from 0 Volts to BV min l Typical IR less than 1uA when VBR min above 15V. Bi-directional l IEC 61000-4-2 ESD 30KV(Air), 30KV(Contact) l ESD protection of data lines in accordance with IEC 61000-4-2 l EFT protection of data lines in accordance with IEC 61000-4-4 Cathode Anode l Halogen free and RoHS compliant l Lead-free finish Uni-directional Mechanical Characteristics l CASE: SOD-123FL Molded Plastic over glass passivated junction. l Mounting Position: Any l Polarity: by cathode band denotes uni-directional device, none cathode band denotes bi-directional device. l Terminal: Solder plated Maximum Ratings and Characteristics @ 25°C Ambient Temperature (unless otherwise noted) Parameter Peak Pulse Power Dissipation on 10/1000 us Waveform Peak Pulse Current of on 10/1000us Waveform (Note 1, 2, FIG.1) (Note 1, FIG.3) Operating Junction Temperature Range Storage Temperature Range Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig.2. Rev. 2.0, 24-Nov.-16 W W W.S E M I T E C H .C N Symbol Value Units PPPM Min 200 W IPPM See Table 1 A TJ -55 to 150 °C TSTG -55 to 150 °C MMF Series Electrical Specification @ Tamb 25°C Type Number Marking Reverse Breakdown Stand-Off Voltage Voltage Min. @IT Breakdown Voltage Max. @ IT Test Current Maximum Clamping Voltage @IPP Peak Pulse Current Reverse Leakage @VRMW Uni Bi Uni Bi VRMW(V) VBR MIN(V) VBR MAX(V) IT (mA) VC(V) IPP(A) IR(uA) MMF5.0A MMF5.0CA 5.0A 5.0CA 5.0 6.40 7.00 10 9.2 21.7 400.0 MMF6.0A MMF6.0CA 6.0A 6.0CA 6.0 6.67 7.37 10 10.3 19.4 400.0 MMF6.5A MMF6.5CA 6.5A 6.5CA 6.5 7.22 7.98 10 11.2 17.9 250.0 MMF7.0A MMF7.0CA 7.0A 7.0CA 7.0 7.78 8.60 10 12.0 16.7 100.0 MMF7.5A MMF7.5CA 7.5A 7.5CA 7.5 8.33 9.21 1 12.9 15.5 50.0 MMF8.0A MMF8.0CA 8.0A 8.0CA 8.0 8.89 9.83 1 13.6 14.7 25.0 MMF8.5A MMF8.5CA 8.5A 8.5CA 8.5 9.44 10.40 1 14.4 13.9 10.0 MMF9.0A MMF9.0CA 9.0A 9.0CA 9.0 10.00 11.10 1 15.4 13.0 5.0 MMF10A MMF10CA 10A 10CA 10.0 11.10 12.30 1 17.0 11.8 2.5 MMF11A MMF11CA 11A 11CA 11.0 12.20 13.50 1 18.2 11.0 2.5 MMF12A MMF12CA 12A 12CA 12.0 13.30 14.70 1 19.9 10.1 2.5 MMF13A MMF13CA 13A 13CA 13.0 14.40 15.90 1 21.5 9.3 1 MMF14A MMF14CA 14A 14CA 14.0 15.60 17.20 1 23.2 8.6 1 MMF15A MMF15CA 15A 15CA 15.0 16.70 18.50 1 24.4 8.2 1 MMF16A MMF16CA 16A 16CA 16.0 17.80 19.70 1 26.0 7.7 1 MMF17A MMF17CA 17A 17CA 17.0 18.90 20.90 1 27.6 7.2 1 MMF18A MMF18CA 18A 18CA 18.0 20.00 22.10 1 29.2 6.8 1 MMF20A MMF20CA 20A 20CA 20.0 22.20 24.50 1 32.4 6.2 1 MMF22A MMF22CA 22A 22CA 22.0 24.40 26.90 1 35.5 5.6 1 MMF24A MMF24CA 24A 24CA 24.0 26.70 29.50 1 38.9 5.1 1 MMF26A MMF26CA 26A 26CA 26.0 28.90 31.90 1 42.1 4.8 1 MMF28A MMF28CA 28A 28CA 28.0 31.10 34.40 1 45.4 4.4 1 MMF30A MMF30CA 30A 30CA 30.0 33.30 36.80 1 48.4 4.1 1 MMF33A MMF33CA 33A 33CA 33.0 36.70 40.60 1 53.3 3.8 1 MMF36A MMF36CA 36A 36CA 36.0 40.00 44.20 1 58.1 3.4 1 MMF40A MMF40CA 40A 40CA 40.0 44.40 49.10 1 64.5 3.1 1 MMF43A MMF43CA 43A 43CA 43.0 47.80 52.80 1 69.4 2.9 1 MMF45A MMF45CA 45A 45CA 45.0 50.00 55.30 1 72.7 2.8 1 MMF48A MMF48CA 48A 48CA 48.0 53.30 58,90 1 77.4 2.6 1 MMF51A MMF51CA 51A 51CA 51.0 56.70 62.70 1 82.4 2.4 1 MMF54A MMF54CA 54A 54CA 54.0 60.00 66.30 1 87.1 2.3 1 MMF58A MMF58CA 58A 58CA 58.0 64.40 71.20 1 93.6 2.1 1 MMF60A MMF60CA 60A 60CA 60.0 66.70 73.70 1 96.8 1.8 1 MMF64A MMF64CA 64A 64CA 64.0 71.10 78.60 1 103.0 1.7 1 MMF70A MMF70CA 70A 70CA 70.0 77.80 86.00 1 113.0 1.5 1 MMF75A MMF75CA 75A 75CA 75.0 83.30 92.10 1 121.0 1.4 1 ※ For Bi-directional type having VRWM of 10 Volts and less, the IR limit is double Rev. 2.0, 24-Nov.-16 W W W.S E M I T E C H .C N MMF Series Type Number Uni Marking Bi Reverse Breakdown Stand-Off Voltage Voltage Min. @IT Breakdown Voltage Max. @ IT Test Current Maximum Clamping Voltage @IPP Peak Pulse Current Reverse Leakage @VRMW Uni Bi VRMW(V) VBR MIN(V) VBR MAX(V) IT (mA) VC(V) IPP(A) IR(uA) 86.70 95.80 1 126.0 1.4 1 MMF78A MMF78CA 78A 78CA 78.0 MMF85A MMF85CA 85A 85CA 85.0 94.40 104.00 1 137.0 1.3 1 MMF90A MMF90CA 90A 90CA 90.0 100.00 111.00 1 146.0 1.2 1 MMF100A MMF100CA 100 100C 100.0 111.00 123.00 1 162.0 1.1 1 MMF110A MMF110CA 110 110C 110.0 122.00 135.00 1 177.0 1.0 1 MMF120A MMF120CA 120 120C 120.0 133.00 147.00 1 193.0 0.9 1 MMF130A MMF130CA 130 130C 130.0 144.00 159.00 1 209.0 0.8 1 MMF150A MMF150CA 150 150C 150.0 167.00 185.00 1 243.0 0.7 1 MMF160A MMF160CA 160 160C 160.0 178.00 197.00 1 259.0 0.7 1 MMF170A MMF170CA 170 170C 170.0 189.00 209.00 1 275.0 0.6 1 MMF180A MMF180CA 180 180C 180.0 198.00 222.00 1 292.0 0.6 1 MMF190A MMF190CA 190 190C 190.0 209.00 233.00 1 308.0 0.5 1 ※ For Bi-directional type having VRWM of 10 Volts and less, the IR limit is double I-V Curve Characteristics ※ ※ Bi-directional ※ Uni-directional ※ ※ ※ ※ ※ ※ PPPM Peak Pulse Power Dissipation - Max power dissipation VRWM Reverse Stand-off Voltage - Maximum voltage that can be applied to TVS without operation VBR Breakdown Voltage – Maximum voltage that flows though the TVS at a specified current (IT) VC Clamping Voltage – Peak voltage measured across the TVS at a specified IPPM (peak impulse current) IR Reverse Leakage Current – Current measured at VR VF Forward Voltage Drop for Uni-directional Rev. 2.0, 24-Nov.-16 W W W.S E M I T E C H .C N MMF Series Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Fig.1 Peak Pulse Power Rating Fig.2 Pulse Derating Cure Fig.3 Pulse Waveform Fig.4 Typical Junction Capacitance Rev. 2.0, 24-Nov.-16 W W W.S E M I T E C H .C N MMF Series Package Outline Dimensions and Pad Layouts SOD-123FL Dim Millimeters Min Rev. 2.0, 24-Nov.-16 Max Inches Min Max A 3.40 3.95 0.142 0.155 B 2.50 2.90 0.098 0.114 C 1.40 1.95 0.055 0.077 D 0.90 1.35 0.035 0.053 E 0.50 1.10 0.020 0.043 G 0.25 ------ 0.010 ---- H ------ 0.20 ---- 0.008 W W W.S E M I T E C H .C N