TDK ACH4518-152 3-teminal filter Datasheet

3-teminal Filters
For power line
ACH series
Type:
ACH32C
ACH3218
ACH4518
[1206 inch]*
[1207 inch]
[1807 inch]
* Dimensions Code [EIA]
Issue date:
September 2011
• All specifications are subject to change without notice.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(1/6)
3-terminal Filters
For Power Line
Conformity to RoHS Directive
ACH Series ACH32C
FEATURES
• These T-type EMC filters comprise ferrite beads and chip
capacitors and are engineered to handle high current levels.
• The series offers even greater attenuation characteristics when
used in a stable circuit on the ground.
• The ACH series is ideal for high-density circuit design, since the
series is vertically mounted and does not require much mounting
space.
• Because guarantee temperature range is –40 to +125°C, it is
possible to use in strict environmental condition.
• Available for reflow soldering.
APPLICATIONS
Home electronic equipment, (TVs, VCRs, CD players, DAT players,
electric musical instruments, PCs, etc.), office automation equipment (computers, terminals, stand-alone word processors, fax
machines, etc.), factory automation equipment (robots, numerical
control devices, process controllers, etc.), automotive electronics
(car navigation, ECU, etc.)
PRODUCT IDENTIFICATION
ACH 32C - 103 - T
(1) (2)
(3)
(4)
(5)
(1) Series name
(2) Dimensions
32C: 3216 type(3.2×1.6mm)
(3) Capacitance
103: 10000pF
(4) Packaging style
T: ø180mm reel taping
(5) TDK internal code
TEMPERATURE RANGES
Operating
Storage(After mount)
–40 to +125°C
–40 to +125°C
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
Reel
ø180mm
Quantity
2000 pieces/reel
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
RECOMMENDED SOLDERING CONDITIONS
RECOMMENDED TEMPERATURE PROFILE
FOR LEAD-FREE SOLDER
3.2 ± 0.2
2.1±0.2
1.6±0.2
3.0
Marking
Peak 245˚C max.
3
1
Natural
cooling
230˚C
GND
2
1
3
180˚C
150˚C
60 to 120s
0.1
2
0.45
No polarity
1.7
Ferrite
Time (s)
GND terminal
Terminal
electrode
0.7
10 to 30s
Dimensions in mm
REFLOW PROFILE FOR SOLDER HEAT RESISTANCE
Peak 260˚C max.
RECOMMENDED PC BOARD PATTERN
REFLOW SOLDERING
Natural
cooling
230˚C
180˚C
4.2
1.0
0.6
150˚C
1.0
2.6
40s max.
0.5
60 to 120s
Land pattern
Time (s)
Dimensions in mm
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
001-03 / 20110928 / e9611_ach
(2/6)
ELECTRICAL CHARACTERISTICS
Part No.
Rated voltage
Edc(V)max.
Rated current
(A)max.
Insulation resistance
(MΩ )min.
DC resistance
(mΩ )max.
ACH32C-100-T001
ACH32C-220-T001
ACH32C-470-T001
ACH32C-101-T001
ACH32C-331-T001
ACH32C-102-T001
ACH32C-222-T001
ACH32C-103-T001
ACH32C-333-T001
ACH32C-104-T001
50
50
50
50
50
50
50
50
50
50
6
6
6
6
6
6
6
6
6
6
100
100
100
100
100
100
100
100
100
100
2
2
2
2
2
2
2
2
2
2
Guaranteed
attenuation
(dB)
–15
–15
–15
–20
–20
–25
–25
–25
–25
–25
Guaranteed frequency
bandwidth
(MHz)
2000 to 6000
1300 to 2500
650 to 2500
450 to 1300
200 to 800
100 to 350
55 to 300
30 to 200
10 to 300
3.5 to 200
TYPICAL ELECTRICAL CHARACTERISTICS
ATTENUATION vs. FREQUENCY CHARACTERISTICS
(Glass epoxy coated double side mounting PCB)
0
0
102
–20
–10
Attenuation (dB)
Attenuation (dB)
–10
103
–30
–40
104
–50
–60
–30
333
–40
–50
–60
–70
–70
–80
1
10
0
100
Frequency (MHz)
1000
331
–10
–80
1
10000
10
100
Frequency (MHz)
1000
10000
1000
10000
0
100
–10
–20
Attenuation (dB)
Attenuation (dB)
222
–20
–30
–40
–50
–60
–70
–20
220
470
101
–30
–40
–50
–60
–70
–80
1
10
100
Frequency (MHz)
1000
10000
–80
1
10
100
Frequency (MHz)
CIRCUIT DIAGRAM
S.G.
ACH-C Series
L.M.
50Ω
50Ω
• All specifications are subject to change without notice.
001-03 / 20110928 / e9611_ach
(3/6)
3-terminal Filters
For Power Line
Conformity to RoHS Directive
ACH Series ACH3218, ACH4518
FEATURES
• The ACH series consists of products with superior attenuation
characteristics, in which the T-type filter circuit is magnetically
shielded with ferrite.
• The series offers even greater attenuation characteristics when
used in a stable circuit on the ground.
• The ACH series is ideal for high-density circuit design, since the
series is vertically mounted and does not require much mounting
space.
• Available for reflow soldering.
• It is a product conforming to RoHS directive.
PRODUCT IDENTIFICATION
ACH 3218 - 223 - T D
(1)
(2)
(3)
(4)
(5)
(1) Series name
(2) Dimensions
(3) Type
(4) Packaging style
(5) TDK internal code
TEMPERATURE RANGES
Operating
Storage(After mount)
–40 to +125°C
–40 to +125°C
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference
between the solder temperature and product temperature does
not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• The inductance value may change due to magnetic saturation if
the current exceeds the rated maximum.
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
• When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
Quantity
1000 pieces/reel
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
001-03 / 20110928 / e9611_ach
(4/6)
ACH3218 TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
RECOMMENDED PC BOARD PATTERN
REFLOW SOLDERING
Terminal
electrode
1
3
2
0.6
3
1
1.94
2.5±0.25
3.2 ± 0.3
Insulation
resin
GND
2
No polarity
0.45
1.8±0.2
Ferrite
Dimensions in mm
GND terminal
1.4
0.6
2.2
Resist
Land pattern
1.4
Dimensions in mm
• Dimension without tolerance
is reference value.
ELECTRICAL CHARACTERISTICS
Part No.
25dB attenuation
frequency range
(MHz)
ACH3218-223
ACH3218-103
ACH3218-682
ACH3218-472
ACH3218-332
ACH3218-222
ACH3218-152
ACH3218-102
ACH3218-681
ACH3218-471
ACH3218-331
ACH3218-221
ACH3218-151
ACH3218-101
ACH3218-680
ACH3218-470
ACH3218-330
ACH3218-220
11 to 55
17 to 60
22 to 75
30 to 85
37 to 90
45 to 105
60 to 115
80 to 140
95 to 150
120 to 180
130 to 210
170 to 250
205 to 280
265 to 340
340 to 420
420 to 500
500 to 600
600 to 700
Rated
voltage
Edc
(V)max.
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
Rated
current
(A)max.
DC resistance
(Ω )max.
[Terminal No.1 to 3]
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
TYPICAL ELECTRICAL CHARACTERISTICS
ATTENUATION vs. FREQUENCY CHARACTERISTICS
Insulation
resistance
(MΩ )min.
[Terminal No.1 to 2/No.2 to 3]
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
MEASURING CIRCUIT
0
S.G.
ACH Series
L.M.
50Ω
3
10
68 47 33
2 2 2
3
10
3
20
50Ω
22
0
220
33
0
47
0
681
101
15
1
22
1
331
471
2
68
2 15
10
2
22
Attenuation (dB)
10
30
40
50
1
30
100
Frequency (MHz)
300
1000
• All specifications are subject to change without notice.
001-03 / 20110928 / e9611_ach
(5/6)
ACH4518 TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
RECOMMENDED PC BOARD PATTERN
REFLOW SOLDERING
Terminal
electrode
1
3
3
1
1.94
3.2±0.3
4.5±0.4
Insulation
resin
GND
2
2
1.0
No polarity
0.45
1.8±0.2
Ferrite
Dimensions in mm
GND terminal
1.75
• Dimension without tolerance
is reference value.
Resist
Land pattern
1.0
3.5
1.75
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Part No.
25dB attenuation
frequency range
(MHz)
ACH4518-333
ACH4518-223
ACH4518-153
ACH4518-103
ACH4518-682
ACH4518-472
ACH4518-332
ACH4518-222
ACH4518-152
ACH4518-102
ACH4518-681
ACH4518-471
ACH4518-331
ACH4518-221
ACH4518-151
ACH4518-101
ACH4518-680
ACH4518-470
ACH4518-330
ACH4518-220
6 to 60
9 to 65
11 to 70
15 to 75
20 to 85
25 to 90
35 to 100
40 to 110
50 to 130
65 to 150
75 to 160
95 to 180
115 to 205
150 to 250
190 to 290
235 to 335
290 to 395
360 to 460
450 to 550
530 to 650
Rated
voltage
Edc
(V)max.
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
TYPICAL ELECTRICAL CHARACTERISTICS
ATTENUATION vs. FREQUENCY CHARACTERISTICS
Rated
current
(A)max.
DC resistance
(Ω )max.
[Terminal No.1 to 3]
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
Insulation
resistance
(MΩ )min.
[Terminal No.1 to 2/No.2 to 3]
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
MEASURING CIRCUIT
0
S.G.
ACH Series
L.M.
50Ω
50Ω
0
22
0
330 680
47
22 15 10 68 47 33 22
3 3 3 2 2 2 2
33
3
20
1
101
151 31
3
22
1
1 68
47
2
2 15
10
Attenuation(dB)
10
30
40
50
60
1
3
10
30
100
Frequency (MHz)
300
1000
• All specifications are subject to change without notice.
001-03 / 20110928 / e9611_ach
(6/6)
PACKAGING STYLES
REEL DIMENSIONS
ø60±2.0
1.0
2.0±0.5
13.0±0.3
ø13±0.5
17.0±1.4
ø21±0.8
ø178±2.0
Dimensions in mm
1.5 +0.1
–0.0
Cavity
5.5±0.05
Sprocket
hole
B
12.0±0.3
0.3 to 0.4
1.75±0.1
TAPE DIMENSIONS
T
A
4.0±0.1
D
C
Dimensions in mm
Type
321825
451832
A
2.2±0.2
2.2±0.2
40 to 80
B
3.7±0.2
5.2±0.2
Taping
C
4.0±0.1
4.0±0.1
D
2.0±0.05
2.0±0.05
T
3.3max.
3.8max.
200min.
Drawing direction
300min.
Dimensions in mm
• All specifications are subject to change without notice.
001-03 / 20110928 / e9611_ach
Similar pages