CIT A171AS12VDC.96R Switching capacity up Datasheet

A17
RoHS Compliant
R
16.5 x 15.5 x 24.3 mm
Features
Fe
eatures
•
•
•
Switching capacity up to 30A
Small size and light weight
Suitable for automobile and lamp accessories
Contact Data*
Contact Arrangement
1A = SPST N.O.
Maximum Switching Power
280W
Contact Rating
20A @ 14VDC N.O.
Maximum Switching Voltage
75VDC
30A @ 14VDC N.O.
Maximum Switching Current
30A
Contact Resistance
< 50 milliohms initial
Contact Material
AgSnO2
Coil Data*
Coil Voltage
VDC
Coil Resistance
Ω +/- 10%
Pick Up Voltage
VDC (max)
Release Voltage
VDC (min)
Coil Power
W
Rated
Max
0.96W
75% of rated
voltage
10% of rated
voltage
12
15.6
150
9.0
1.2
0.96
24
31.2
600
18.0
2.4
0.96
Operate Time
ms
Release Time
ms
≤10
≤5
General Data*
Electrical Life @ rated load
100K cycles, average
Mechanical Life
10M cycles, average
Insulation Resistance
100M Ω min. @ 500VDC initial
Dielectric Strength, Coil to Contact
750V rms min. @ sea level initial
Contact to Contact
500V rms min. @ sea level initial
Shock Resistance
98m/s2 for 11 ms
Vibration Resistance
1.5mm double amplitude 10~55Hz
Operating Temperature
-40oC to +85oC
Storage Temperature
-40oC to +85oC
Solderability
260oC for 5 s
Weight
13g
*
Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the
application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise
the operation of the relay.
www.citrelay.com
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
page 1
Specifications and availability subject to change without notice.
A17
Ordering Information
1. Series
A17
1A
S
12VDC
.96
A17
2. Contact Arrangement
1A = SPST N.O. (20A contacts)
1AH = SPST N.O. (30A contacts)
3. Sealing Option
S = Sealed
4. Coil Voltage
12VDC
24VDC
5. Coil Power
.96 = .96W
6. Coil Suppresion
Blank = Standard
R = Resistor (1100Ω for 12VDC, 4300 for 24VDC)
D = Diode (1N405) Cathode on “86” terminal
Schematic & PC Layout
Dimensions
Units = mm
Bottom Views
15.00
[.59]
16.00
[.63]
87
85
86
30
23.70
[.93]
2.80 TYP
[.11]
11.00 TYP
[.43]
0.80 TYP
[.03]
8.00
[.31]
(4X) Ø 3.00
[.12]
7.80
[.31]
page 2
www.citrelay.com
8.00
[.31]
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
7.80
[.31]
fax - 763.535.2194
Specifications and availability subject to change without notice.
Similar pages