TECHNICAL DATA Hex Inverter Buffers/Drivers with Open-Collector IN7406 High-Voltage Outputs The IN7406 monolithic TTL hex inverter buffers/drivers feature high-voltage open collector outputs for interfacing with high-level circuits (such as MOS) or for driving high-current loads (such as lamps or relays), and are also characterized for use as inverter buffers for driving TTL inputs. • • • • • Minimum breakdown Voltages is 30 V Maximum sink Current is 40 mА Converts TTL Voltage Levels to MOS Levels Open-Collector Driver for Indicator Lamps and Relays Inputs Fully Compatible with MOST TTL Circuits. ORDERING INFORMATION IN7406N Plastic IN7406D SOIC TA = -10° to 70° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM FUNCTION TABLE Inputs Output A Y L Z H L Z = High Impedance Y=Ā PIN 14 =VCC PIN 7 = GND 1 IN7406 MAXIMUM RATINGS* Symbol Parameter Value Unit VCC Supply Voltage 7.0 V VIN Input Voltage 5.5 V VOUT Output Voltage 30 V Tstg Storage Temperature Range -65 to +150 °C * Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit 5.25 V VCC Supply Voltage 4.75 VIH High Level Input Voltage 2.0 VIL Low Level Input Voltage 0.8 V UOH High Level Output Voltage 30 V IOL Low Level Output Current 40 mA TA Ambient Temperature Range +70 °C -10 V DC ELECTRICAL CHARACTERISTICS Guaranteed Limit Symbol Parameter Test Conditions Min Max Unit VIK Input Clamp Voltage VCC = 4.75V, IIN = -12 mA -1.5 V IOH High Level Output Current VCC = 4.75V, VOH =30V 0.25 mA VOL Low Level Output Voltage VCC = 4.75V, IOL = 16 mA 0.4 V VCC = 4.75V, IOL = 40 mA 0.7 IIH High Level Input Current VCC = 5.25V, VIN = 2.4 V 0.04 mA IIL Low Level Input Current VCC = 5.25V, VIN = 0.4 V -1.6 mA ICC Supply Current VCC = 5.25V Outputs High 48 mA Outputs Low 51 2 IN7406 AC ELECTRICAL CHARACTERISTICS (T = 25°C, VCC = 5.0 V, CL = 15 pF, RL = 110 Ω, Input tr = tf = 10 ns) Symbol Parameter tPLH tPHL Min Max Unit Propagation Delay Time, Low to High Level Output (from Input to Output) 18 ns Propagation Delay Time, High to Low Level Output (from Input to Output) 28 ns Figure 1. Switching Waveforms * Includes all probe and jig capacitance Figure 2. Test Circuit 3 IN7406 N SUFFIX PLASTIC DIP (MS - 001AA) A Dimension, mm 8 14 B 7 1 Symbol MIN MAX A 18.67 19.69 B 6.1 7.11 5.33 C F L C -T- SEATING PLANE N G M K J H D 0.25 (0.010) M T NOTES: 1. Dimensions “A”, “B” do not include mold flash or protrusions. Maximum mold flash or protrusions 0.25 mm (0.010) per side. D 0.36 0.56 F 1.14 1.78 G 2.54 H 7.62 J 0° 10° K 2.92 3.81 L 7.62 8.26 M 0.2 0.36 N 0.38 D SUFFIX SOIC (MS - 012AB) Dimension, mm A 14 8 H B 1 G P 7 R x 45 C -TK D SEATING PLANE M Symbol MIN MAX A 8.55 8.75 B 3.8 4 C 1.35 1.75 D 0.33 0.51 F 0.4 1.27 G 1.27 H 5.27 J 0° 8° K 0.1 0.25 1. Dimensions A and B do not include mold flash or protrusion. M 0.19 0.25 2. Maximum mold flash or protrusion 0.15 mm (0.006) per side for A; for B ‑ 0.25 mm (0.010) per side. P 5.8 6.2 R 0.25 0.5 J 0.25 (0.010) M T C M NOTES: F 4