MVAH Series VCXO Industry Standard Footprint +2.5VDC, +3.3VDC, or +5.0VDC Supply Voltage HCMOS Output RoHS Compliant Available Frequency Range Frequency Stability (Inclusive of Temp., Load and Voltage) Aging 1.000MHZ TO 220.000MHZ (See Part Number Guide for Options) Operating Temp.Range (See Part Number Guide for Options) ±5ppm per year Storage Temp. Range -55°C to +125°C Supply Voltage (Vdd) Supply Current Load Control Voltage +2.5VDC ±10% +3.3VDC ±10% +5.0VDC ±10% 60mA max 60mA max 85mA max 15pF 30pF 30pF 1.25 VDC ±1.00 VDC 1.65 VDC ±1.50 VDC 2.50 VDC ±2.00 VDC Output HCMOS Logic “0” 10% Vdd max Logic “1” 90% Vdd min Symmetry (50% of waveform) (See Part Number Guide for Options) Rise / Fall Time (10% to 90%) 10nSec max Start Time 10mSec max Linearity Pullability (See Part Number Guide for Options) (See Part Number Guide for Options) Environmental & Mechanical Detail Shock MIL-STD-883, Meth 2002, Cond B Solderability Vibration MIL-STD-883, Meth 2003 MIL-STD-883, Meth 2007, Cond A Reflow Solderability 260°C for 10 seconds Gross Leak Test MIL-STD-883, Meth 1014, Cond C Fine Leak Test MIL-STD-883, Meth 1014, Cond A Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ S = Internal Code YYWW = L = Line 2 = SYYWWL 4 Numerical Digit Date Code (Year / Week) Jan 27 2011=1105 Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 02/20/12 G Pg 1 of 2 Part Number Guide MVA 14 Pin DIP VCXO RoHS Compliant Blank = Not Compliant F = Compliant Supply Voltage Output H = HCMOS 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Frequency H Frequency Stability 010 = ±10 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Symmetry Blank = 40%/60% A = 45%/55% Linearity Pullability A = ±200 ppm min* C = ±100 ppm min D = ±50 ppm min P = ±80 ppm min Blank = ±20% max X = ±5% max Y = ±10% max Z = ±15% max Please Consult with MMD Sales Deparment for any other Parameters or Options *Not available with 2.5VDC 3.3VDC or option Mechanical Details 20.70 [.815] MAX MXXX.XXX SYYWWL XXXXX 5.08 [.200] MAX 15.24 [.600] 5.08 [.200] 8 13.10 [.516] MAX 14 7.62 [.300] 1 7 .46 [.018] Black Dot to Denote Pin 1 DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED PIN CONNECTIONS PIN 1 VOLTAGE CONTROL PIN 7 GROUND PIN 8 OUTPUT PIN 14 SUPPLY VOLTAGE MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 02/20/12 G Pg 2 of 2