Fairchild HLMP-K401 T-100 3 mm solid state lamp Datasheet

T-100 (3 mm)
SOLID STATE LAMPS
PURE GREEN
PURE GREEN
SOFT ORANGE
SOFT ORANGE
SOFT ORANGE
PACKAGE DIMENSIONS
.137 (3.48)
DIA
.113 (2.88)
.122 (3.1)
.106 (2.7)
HLMP-K600
HLMP-K640
HLMP-K400
HLMP-K401
HLMP-K402
TINTED
CLEAR
TINTED
TINTED
TINTED
FEATURES
• Popular T-100 package
• Low drive current
• Solid state reliability
• Wide viewing angle
.047 (1.2)
.032 (.08)
.189 (4.8)
.165 (4.2)
• Choice of pure green or soft orange colors
DESCRIPTION
1.040 (26.4)
MIN
(ANODE)
.059 (1.5)
.035 (0.9)
.100 (2.54)
.040 (1.00)
MIN
.018 (.46) 2X
.012 (.30)
These T-100 LEDs are widely used as general
purpose indicators. The pure green lamps is
made with a GaP LED on a GaP substrate. The
soft orange is made with a GaAsP LED on a GaP substrate. They
are encapsulated in epoxy packages and are designed to provide
superior light output and a wide viewing angle.
NOTES:
1. ALL DIMENSIONS ARE IN INCHES (mm).
2. LEAD SPACING IS MEASURED WHERE THE LEADS
EMERGE FROM THE PACKAGE.
3. PROTRUDED RESIN UNDER THE FLANGE IS 1.5 mm (.059)
MAX.
.020 (.51)
2X
.016 (.41)
ABSOLUTE MAXIMUM RATING
Parameter
Power Dissipation
(TA =25°C)
GREEN
ORANGE
UNITS
110
110
mW
Forward Current
40
40
mA
Peak Forward Current (f=1kHz, DF=10%)
200
200
mA
Lead Soldering Time at 260° C
5
5
sec
Operating Temperature
-40 to +100
-40 to +100
°C
Storage Temperature
-40 to +100
-40 to +100
°C
 2001 Fairchild Semiconductor Corporation
DS300014
2/27/01
1 OF 4
www.fairchildsemi.com
T-100 (3 mm)
SOLID STATE LAMPS
ELECTRICAL / OPTICAL CHARACTERISTICS
Part Number
HLMP-K600
(TA =25°C)
HLMP-K640*
HLMP-K400
HLMP-K401
HLMP-K402
Luminous Intensity (mcd)
IF = 10mA
Minimum
1.0
4.0
1.0
2.0
3.0
Typical
4.5
15.0
4.0
5.0
7.0
2.7
3.0
2.4
2.4
2.4
Forward Voltage (V)
Maximum
Typical
Condition
IF = 10mA
2.1
2.2
1.9
1.9
1,9
Peak Wavelength (nm)
555
555
612
612
612
Spectral Line Half Width (nm)
24
24
40
40
40
IF = 10mA
Reverse Voltage (V)
5
5
5
5
5
IR = 100µA
Viewing Angle (°)
90
45
90
90
90
IF = 10mA
IF = 10mA
* HLMP-K640 test condition is IF = 20mA
www.fairchildsemi.com
2 OF 4
2/27/01
DS300014
T-100 (3 mm)
SOLID STATE LAMPS
TYPICAL PERFORMANCE CURVES
(TA =25°C)
90
2.5
RELATIVE LUMNOUS INTENSITY
(NORMALIZED AT 20 mA)
IF - FORWARD CURRENT (mA)
80
70
60
50
40
30
20
10
2.0
1.5
1.0
0.5
0.0
0
1.0
2.0
3.0
4.0
5.0
0
10
VF - FORWARD VOLTAGE (V)
Fig. 1 Forward Current vs. Forward Voltage
50
IF - FORWARD CURRENT (mA)
ORANGE
GREEN
RELATIVE INTENSITY
30
Fig. 2 Relative Luminous Intensity vs.
DC Forward Current
1.0
0.5
0
40
30
20
10
0
500
550
600
650
700
0
750
20
-20˚
-10˚
0˚
10˚
20˚
-20˚
30˚
-40˚
40˚
50˚
-70˚
-80˚
0
20
40
10˚
20˚
60
30˚
80
40˚
50˚
60˚
-70˚
80˚
20
0˚
-60˚
70˚
40
100
-50˚
60˚
60
-10˚
-40˚
-60˚
80
80
-30˚
-50˚
-90˚
100
60
Fig. 4 Current Derating Curve
Fig. 3 Relative Intensity vs. Peak Wavelength
-30˚
40
TA - AMBIENT TEMPERATURE (˚C)
WAVELENGTH (nm)
DS300014
20
IF - DC FORWARD CURRENT (mA)
70˚
-80˚
-90˚
100
90˚
100
80˚
80
60
40
20
0
20
40
60
REL. LUMINOUS INTENSITY (%)
REL. LUMINOUS INTENSITY (%)
Fig. 5A Radiation Diagram
(HLMP-K600, HLMP-K400, HLMP-K401, HLMP-K402)
Fig. 5B Radiation Diagram
(HLMP-K640)
2/27/01
3 OF 4
80
90˚
100
www.fairchildsemi.com
T-100 (3 mm)
SOLID STATE LAMPS
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE
TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT
ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT
DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE
RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical
implant into the body,or (b) support or sustain life,
and (c) whose failure to perform when properly
used in accordance with instructions for use provided
in labeling, can be reasonably expected to result in a
significant injury of the user.
www.fairchildsemi.com
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
4 OF 4
2/27/01
DS300014
Similar pages