Marktech CCCCC-DXS-XHHKKMN4 Creeâ® p4 led Datasheet

Cree® P4 LED
CP41B-RDS/ADS (40 degrees)
CP41B-RFS/AFS (70 degrees)
CP41B-RHS/AHS (100 degrees)
Data Sheet
This revolutionary package design allows the lighting designer to reduce the number of LEDs
required and provide a more uniform and unique illuminated appearance than with other
LED solutions.
This is possible through the efficient optical package design and high-current capabilities.
The low-profile package can be easily coupled with reflectors or lenses to efficiently distribute
light and provide the desired lit appearance. This product family employs red and amber LED
materials, which allows designers to match the color of many lighting applications like vehicle
signal lamps, channel letters and gaming-equipment lighting.
APPLICATIONS
•
Size (mm): 7.6 x 7.6
•
Channel Letter
•
Color and Typical Dominant Wavelength (nm):
»» Red (628)
»» Amber (591)
•
Amusement
•
Luminous Flux (mlm)
»» CP41B-RDS (4400 - 11000)
»» CP41B-RFS (4400 - 11000)
»» CP41B-RHS (4400 - 13200)
»» CP41B-ADS (4400 - 11000)
»» CP41B-AFS (5500 - 13200)
»» CP41B-AHS (5500 - 13200)
•
Lead-Free
•
RoHS Compliant
0
D-CT1143.00
Data Sheet: CL
FEATURES
Subject to change without notice.
www.cree.com/ledlamps
1
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
Red/Amber
Forward Current
Peak Forward Current
IF
70
mA
Note1
IFP
200
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
220
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering Temperature
Tsol
Note2
Max. 260°C for 5 sec. max.
(3 mm from the base of the epoxy bulb)
Note:
1.
2.
A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C.
Pulse width ≤0.1 msec, duty ≤1/10.
Typical Electrical & Optical Characteristics (TA = 25°C)
Characteristics
Color
Symbol
Condition
Unit
Minimum
Typical
Maximum
2.5
3.0
Forward Voltage
Red/Amber
VF
IF = 70 mA
V
Reverse Current
Red/Amber
IR
VR = 5 V
μA
Red
λD
IF = 70 mA
nm
620
628
637
Amber
λD
IF = 70 mA
nm
584
591
599
CP41B-RDS (40 degree)
Φv
IF = 70 mA
mlm
4400
7000
Dominant Wavelength
Red
Luminous Flux
CP41B-RFS (70 degree)
Φv
IF = 70 mA
mlm
4400
7500
CP41B-RHS (100 degree)
Φv
IF = 70 mA
mlm
5500
8000
CP41B-ADS (40 degree)
Φv
IF = 70 mA
mlm
4400
6500
CP41B-AFS (70 degree)
Φv
IF = 70 mA
mlm
5500
7500
CP41B-AHS (100 degree)
Φv
IF = 70 mA
mlm
5500
8000
CP41B-RDS/ADS
2θ½
IF = 70 mA
deg
CP41B-RFS/AFS
2θ½
IF = 70 mA
deg
70
CP41B-RHS/AHS
2θ½
IF = 70 mA
deg
100
Amber
50% Power Angle
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
2
100
CLD-CT1143.000
40
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Flux Bin Limit (IF = 70 mA)
Amber
Red
CP41B-RDS/RFS (40/70 degree)
Bin Code
Min.
(mlm)
Max.
(mlm)
CP41B-ADS (40 degree)
Bin Code
Min.
(mlm)
Max.
(mlm)
L0
4400
5500
L0
4400
5500
M0
5500
6600
M0
5500
6600
N0
6600
8730
N0
6600
8730
P0
8730
11000
P0
8730
11000
CP41B-RHS (100 degree)
CP41B-AFS/AHS (70/100 degree)
Bin Code
Min.
(mlm)
Max.
(mlm)
Bin Code
Min.
(mlm)
Max.
(mlm)
L0
4400
5500
M0
5500
6600
M0
5500
6600
N0
6600
8730
N0
6600
8730
P0
8730
11000
P0
8730
11000
Q0
11000
13200
Q0
11000
13200
Tolerance of measurement of luminous Flux is ±15%
Color Bin Limit (IF = 70 mA)
Red
Amber
Bin Code
Min.
(nm)
Max.
(nm)
Bin Code
Min.
(nm)
Max.
(nm)
RE
620
637
A2
584
587
A3
587
590
A4
590
593
A5
593
596
A6
596
599
Tolerance of measurement of dominant wavelength is ±1 nm
VF Bin Limit (IF = 70 mA)
Red Amber Bin Code
Min.
(V)
Max.
(V)
Bin Code
Min.
(V)
Max.
(V)
23
2.0
2.2
23
2.0
2.2
24
2.2
2.4
24
2.2
2.4
25
2.4
2.6
25
2.4
2.6
26
2.6
2.8
26
2.6
2.8
27
2.8
3.0
27
2.8
3.0
Tolerance of measurement of VF is ± 0.05 V
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
3
CLD-CT1143.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Order Code Table*
Luminous Flux (mlm)
Kit Number
Viewing
Angle
Red
CP41B-RDS-CL0P0EE4
Red
CP41B-RDS-CM0P0EE4
Color
Kit Number
Viewing
Angle
Min.
Red
CP41B-RFS-CL0P0EE4
70
Red
CP41B-RFS-CM0P0EE4
Red
CP41B-RFS-CN0P0EE4
Color
Kit Number
Viewing
Angle
Min.
Red
CP41B-RHS-CL0Q0EE4
100
Red
CP41B-RHS-CM0Q0EE4
Red
CP41B-RHS-CN0Q0EE4
Color
Dominant Wavelength
Min.
Max.
Color
Bin
40
4400
11000
RE
620
RE
637
40
5500
11000
RE
620
RE
637
Luminous Flux (mlm)
CLD-CT1143.000
Color
Bin
Max.
(nm)
Dominant Wavelength
Max.
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
4400
11000
RE
620
RE
637
70
5500
11000
RE
620
RE
637
70
6600
11000
RE
620
RE
637
Luminous Flux (mlm)
Dominant Wavelength
Max.
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
4400
13200
RE
620
RE
637
100
5500
13200
RE
620
RE
637
100
6600
13200
RE
620
RE
637
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
4
Min.
(nm)
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Order Code Table*
Kit Number
Viewing
Angle
Amber
CP41B-ADS-CL0P0264
Amber
CP41B-ADS-CM0P0354
Amber
Color
Luminous Flux (mlm)
Dominant Wavelength
Min.
Max.
Color
Bin
40
4400
11000
A2
584
A6
599
40
5500
11000
A3
587
A5
596
CP41B-ADS-CM0P0454
40
5500
11000
A4
590
A5
596
Color
Kit Number
Viewing
Angle
Min.
Amber
CP41B-AFS-CM0Q0264
70
Amber
CP41B-AFS-CN0Q0354
70
Amber
CP41B-AFS-CN0Q0454
70
Color
Kit Number
Viewing
Angle
Min.
Amber
CP41B-AHS-CM0Q0264
100
Amber
CP41B-AHS-CN0Q0354
Amber
CP41B-AHS-CN0Q0454
Luminous Flux (mlm)
Min.
(nm)
Color
Bin
Max.
(nm)
Dominant Wavelength
Max.
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
5500
13200
A2
584
A6
599
6600
13200
A3
587
A5
596
6600
13200
A4
590
A5
596
Luminous Flux (mlm)
Dominant Wavelength
Max.
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
5500
13200
A2
584
A6
599
100
6600
13200
A3
587
A5
596
100
6600
13200
A4
590
A5
596
Note: The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one
intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin codes and single color-bin
codes will not be orderable.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT1143.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Graphs
IF (mA)
100.0
1.25
1.0
80.0
60.0
0.75
Red
40.0
0.5
Amber
1.8
2.0
2.2
2.4
2.6
VF(V)
2.8
Amber
-60
-50
-40
-30
-20
0.0
0
20
40
60
80
IF(mA)
100
FIG.2 RELATIVE LUMINOUS INTENSITY VS.
FORWARD CURRENT
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
Vr(V)
Red
0.25
20.0
0.0
IV(%)
-10
(RELATIVE LUMINOUS INTENSITY)
0
100%
-10
80%
-20
60%
-30
40%
-40
20%
Amber
-50
Ir(uA)
FIG.3 Red & Amber REVERSE CURRENT
VS. REVERSE VOLTAGE.
IF(mA)
100
0%
300
400
500
Red
600
700
WL(nm)
800 900
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
WAVELENGTH.
CP41B-RDS/ADS 50% Power Angle : 40
IV(%)
0
1.0
80
60
40
0.5
20
Ta( C)
40
20
60
80
100
0
FIG.5 Red & Amber MAXIMUM FORWARD
DCCURRENT VS AMBIENT
TEMPERATURE (Tjmax=120 C)
0
0
-60
-90
-30
FIG.6 FAR FIELD PATTERN
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
6
CLD-CT1143.000
0
30
60
Angle
90
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Graphs
1.0
IV(%)
CP41B-RHS/AHS
50% Power Angle : 70
0
1.0
0.5
CP41B-RFS
50% Power Angle : 100
0
0.5
0
-90
-60
-30
0
30
60
Angle
90
FIG.7 FAR FIELD PATTERN
1.0
IV(%)
IV(%)
CP41B-AFS
0
-60
-90
-30
FIG.8 FAR FIELD PATTERN
0
30
60
Angle
90
50% Power Angle : 100
0
0.5
0
-60
-90
-30
FIG.9 FAR FIELD PATTERN
0
30
60
Angle
90
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
7
CLD-CT1143.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Mechanical Dimensions
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Document No.
Rev. No.
Burr around bottom of epoxy may be 0.5 mm max.
Applications:
-
SPE/LP377UHR1-70G-01-MT
00
Dimension Drawing
CP41B-RDS/RFS/ADS/AFS:
CP41B-RHS/AHS:
Advertising Signs
Indicators
Traffic
Automotive Lighting
Absolute Maximum Ratings at Ta = 25°C
Items
Absolute maximum
Symbol
Rating
Unit
IF
70
mA
Peak Forward Current*1
IFP
200
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
210
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Forward Current
*2
Lead Soldering
Temperature
Electrostatic Discharge
Classification
(MIL-STD-883E)
*1 pulse
width <=0.1msec
Notes
Max.260°C for 5 sec Max.
Tsol
(3mm from the base of the epoxy bulb)
ESD
Class II
duty <=1/10
*2 Heat sink is recommended to be adequated if the device is operated at ambient temperatures higher than 25 deg C. For long term
performance
the drive currents between 10mA and 50mA are recommended. Please contact COTCO sales representative for more
RoHS Compliance
information on recommended drive conditions.
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
limits)
Typicthreshold
al Electric
al & Opermitted
ptical Chafor
racsuch
teristsubstances,
ics ( Ta = 25or
) used in an exempted application, in accordance with EU Direc°Care
tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS), as amended through April 21, 2006.
Items
Symbol
Condition
Min.
Typ.
Max.
Unit
Forward Voltage
VF
IF = 70mA
---
2.5
3.0
V
Reverse Current
IR
VR = 5V
---
---
100
µA
Dominant Wavelength
λD
IF = 70mA
618
624
630
nm
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright
© 2009 Cree, Inc. All rightsΦ
reserved. The information
in this document is
subject to change without
notice. Cree and
Luminous
Flux
IF = 70mA
4400
7500
--the Cree logo are registered trademarks Vof Cree, Inc.
8
CLD-CT1143.000
50% Power Angle
2θ½
IF = 70mA
---
70
---
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
mlm
deg
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
9
CLD-CT1143.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Package
Features:
•
•
•
•
•
The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation.
The boxes are not water-resistant, and they must be kept away from water and moisture.
The Tube Pack type of packaging.
Max 60 pcs per tube.
R
xxx xxx
R
C OL OR LED LAMP
T YPE
LXXXXXXXX-XXX
LOT
J OWAXXXXX -XX-XXX
QT Y
RANK
P CS
Iv
Vf
Hu e
X
XX
XX
AX XXX XXX XXX X
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
10
CLD-CT1143.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Similar pages