GLENAIR FO1002PT7PT7 Fiber optic cable sets field repairable banding backshell assembly Datasheet

MIL-DTL-38999
Connectors
Glenair ASAP Fiber Optic Cable Sets
Field Repairable Banding Backshell Assembly
D38999 Series III to D38999 Series III
PRODUCT FEATURES

Neoprene Jacketed Cable

MIL-DTL-38999 Series III Connectors in Aluminum,
Composite or Stainless Steel

Glenair Banding Backshells with Flex-Nut Strain-
Relief in Aluminum, Composite or Stainless Steel

Plug, Jam-Nut Receptacle, In-Line and Wall-Mount Receptacle Configurations

Single and Multimode Fiber Media

Simple, Fast Kevlar Strength-Member Termination

Military Standard Dust Caps

MIL-PRF-29504 Qualified Termini

Multichannel Capability: From 2 to 37 Channels

Custom Lengths Available

100% Tested
The Ideal Solution for Combined Environmental
Resistance, Field Repairability and Kevlar Termination
®
Reinforced Cable/Backshell Assemblies
Reinforced, extruded cable is an ideal packaging option for rugged application environments, and Glenair can extrude fiber optic cable for most high-performance applications. But
while the cable is the backbone of this packaging solution, Glenair's ruggedized backshell is the
component which gives the assembly its real functionality. The backshell allows for the convenient termination of cable shielding and/or the Kevlar® strength member. Unlike other backshell
designs, Glenair's assembly uses a simple, easy to use banding technology to terminate cable
shielding and the Kevlar material used in fiber cable extrusions. The Glenair Band-It® technology is fully tested and proven to meet pull strength requirements and is the quickest and most
reliable way to terminate these materials. The Glenair backshell also provides additional strainrelief and environmental protection of the cable to connector transition with it's unique Flex-Nut
style fitting. And unlike overmolded solutions, the reinforced extruded cable/backshell package
allows maintenance technicians to open the cable for field service.
Backshells are selected for functionality (strain-relief, shield termination, and so on) and
for material compatibility with the chosen connector. The turnkey assembly includes custom
extruded cable, Glenair Backshell, MIL-DTL-38999 Style Connectors, MIL-PRF-29504 Termini,
Mil-Spec Dust-Caps and customer specified marking and labeling.
*See Section M For Band-It® Tooling Information
© 2006 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
B-38
www.glenair.com
MIL-DTL-38999
Connectors
Glenair ASAP Fiber Optic Cable Sets
Field Repairable Banding Backshell Assembly
D38999 Series III to D38999 Series III
A
B
CONNECTOR END
CONNECTOR END
L
LENGTH
Reference Part Number Development:
FO1002 P 06 P 06 J 04 - 62 - 100 L
Protective Covers
Basic part Number
L = Less Covers
Omit for with Covers
A Terminus Type
P = Pin Terminus
S = Socket Terminus
Length in Feet
Fiber Size
A Connector Type
09 = 9.3/125 Singlemode
50 = 50/125 Multimode
62 = 62.5/125 Multimode
10 = 100/140 Multimode
20 = 200/230 Multimode
05 = D38999 Style In-Line Receptacle
06 = D38999/26 Style Plug
08 = D38999/24 Style Jam-Nut Receptacle
H7 = D38999/20 Style Wall Mount Receptacle (Std.)
S7 = D38999/20 Style Wall Mount Receptacle (Slotted)
T7 = D38999/20 Style Wall Mount Receptacle (Tapped)
Number of Fibers*
B Terminus Type
02 = 2 Fibers (Shell Size 11)
04 = 4 Fibers (Shell Size 13)
05 = 5 Fibers (Shell Size 15)
08 = 8 Fibers (Shell Size 17)
11 = 11 Fibers (Shell Size 19)
16 = 16 Fibers (Shell Size 21)
21 = 21 Fibers ( Shell Size 23)
29 = 29 Fibers (Shell Size 25)
37 = 37 Fiber (Shell Size 25)
P = Pin Terminus
S = Socket Terminus
B Connector Type
05 = D38999 Style In-Line Receptacle
06 = D38999/26 Style Plug
08 = D38999/24 Style Jam-Nut Receptacle
H7 = D38999/20 Style Wall Mount Receptacle (Std.)
S7 = D38999/20 Style Wall Mount Receptacle (Slotted)
T7 = D38999/20 Style Wall Mount Receptacle (Tapped)
Connector/Backshell Class
F = Aluminum, Electroless Nickel Plating
J = Composite, Olive Drab Cadmium Plating
K = Stainless Steel, Passivated
M = Composite, Electroless Nickel Plating
W = Aluminum, Olive Drab Cadmium Plating
Standard Cable Make-Up:
2mm Jacketed Fiber, Polyurethane Jacketing,
Kevlar Reinforcement, Nominal Temperature
Range -40° to +85°C.
Please Reference Special Marking, Labels Or
Other Identification Specifications on Your
Purchase Order
*See Page B-10 for Insert Arrangements
Part Numbering is for Reference Purposes Only. A Unique Glenair Part Number Will Be Assigned to Your Cable Order.
© 2006 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
B-39
www.glenair.com
Similar pages