LightKey Datasheet of 0.80 inch Three Digit 7 Segment LED Display LD8031C/D Series - 0.80 inch Three Digit 7 Segment LED Display ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Available options ¾ 20.30 mm (0.80 inch) digit high ¾ ¾ Excellent digit appearance ¾ Wide viewing angle ¾ Range of emitted colors ¾ I.C. compatible ¾ Low power consumption ¾ White segment, black face ¾ RoHS compliant Alternative emitting luminosity: Standard or high brightness version ¾ ¾ ¾ ¾ ¾ Alternative emitted color Alternative face and segment color Alternative font Both CA and CC versions are available Cropped terminal pins Package Dimensions 11.20 8.0 DIG.3 A F 27.50 20.30(.80") DIG.2 DIG.1 1.75 E C D PIN 1 20.0 B G DP 20.0 0.50 0.51 6.10 8.30 59.2 23 2.54*5=12.70 Notes: 1. All dimensions are in millimeters (inches), Tolerance is + 0.25mm(0.01inch)unless other wise noted. 2. Specifications are subject to change without notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DS10121729 REV: A.4 HTTP://WWW.DISPLAY-LEDS.COM CHECKED: Emily Zhou APPROVED: M.H. Lin TEL: 0086-574-86322282 PAGE: 1/3 DATE: Jul/20/2011 LightKey Datasheet of 0.80 inch Three Digit 7 Segment LED Display Internal Circuit Diagram LD8031C (Common Cathode) 12 9 DIG.1 A B 11 C 7 D 4 E 2 F 1 G 10 8 DIG.2 DP 5 A B 3 C D E F G DIG.3 DP A B C D E F G DP 6 NO CONNECT LD8031B (Common Anode) 12 A B 11 C 7 D 4 E 2 8 9 DIG.1 F 1 DIG.2 G 10 DP 5 A 3 B C D E F G DIG.3 DP A B C D E F G DP 6 NO CONNCET Selection Guide Three Digit 7 Segment LED Display, Digit Height:20.30mm(0.80 inch), External Dimensions: 59.2 0x27.50x8.30mm (L x W x H ) Part No. Chip Common Common Cathode Anode Material Color WLD IV@IF=20mA Iv@IF=20mA One Seg One DP Min. Typ. Min. Typ. LD8031CR LD8031BR GaAlAs Super Red 640 8 10 8 10 LD8031CD LD8031BD GaAlAs Hi-Red 640 18 25 18 25 LD8031CO LD8031BO GaAsP Orange 625 7 9 7 9 LD8031CY LD8031BY GaAsP Yellow 588 8 10 8 10 LD8031CG LD8031BG GaP Green 568 7 9 7 9 LD8031CUR LD8031BUR AlGaInP Ultra Red 640 30 45 30 45 LD8031CUO LD8031BUO AlGaInP Ultra Orange 625 45 60 45 60 LD8031CUA LD8031BUA AlGaInP Ultra Amber 605 30 45 30 45 LD8031CUY LD8031BUY AlGaInP Ultra Yellow 595 30 45 30 45 LD8031CUG LD8031BUG AlGaInP Ultra Green 573 30 45 30 45 LD8031CPG LD8031BPG InGaN Pure Green 525 120 300 120 300 LD8031CUB LD8031BUB InGaN Ultra Blue 470 30 45 30 45 LD8031CUW LD8031BUW SMD Ultra White \ 100 120 100 120 Unit: \ \ \ nm mcd mcd mcd mcd SPEC NO: DS10121729 REV: A.4 HTTP://WWW.DISPLAY-LEDS.COM CHECKED: Emily Zhou APPROVED: M.H. Lin TEL: 0086-574-86322282 PAGE: 2/3 DATE: Jul/20/2011 LightKey Datasheet of 0.80 inch Three Digit 7 Segment LED Display Electrical Characteristics & Absolute Maximum Ratings Electrical optical Parameter Forward Hi-Red Orange Yellow Green Ultra Red Ultra Orange Ultra Amber Ultra Yellow Ultra Green Pure Green Ultra Blue Ultra White Unit: Reverse Voltage Emitted color Super Red Absolute Maximum Ratings[1] Characteristics[1] Current @ IF=20mA VR=5V Power Dissipation DC Peak Forward Forward Current Current[2] Typ. Max. Per Seg. 1.8 2.2 30 60 25 100 Per DP 1.8 2.2 30 60 25 100 Per Seg. 1.8 2.2 30 60 25 100 Per DP 1.8 2.2 30 60 25 100 Per Seg. 2.1 2.5 30 80 30 100 Per DP 2.1 2.5 30 80 30 100 Per Seg. 2.1 2.5 30 80 30 100 Per DP 2.1 2.5 30 80 30 100 Per Seg. 2.2 2.5 30 80 30 100 Per DP 2.2 2.5 30 80 30 100 Per Seg. 1.9 2.6 30 60 30 100 Per DP 1.9 2.6 30 60 30 100 Per Seg. 2 2.6 30 65 30 100 Per DP 2 2.6 30 65 30 100 Per Seg. 2 2.6 30 65 30 100 Per DP 2 2.6 30 65 30 100 Per Seg. 2 2.6 30 65 30 100 Per DP 2 2.6 30 65 30 100 Per Seg. 2.1 2.6 30 75 30 100 Per DP 2.1 2.6 30 75 30 100 Per Seg. 3.5 4 30 110 30 100 Per DP 3.5 4 30 110 30 100 Per Seg. 3.5 4 30 120 30 100 Per DP 3.5 4 30 120 30 100 Per Seg. 3.5 4 30 120 30 100 Per DP 3.5 4 30 120 30 100 V V uA mW mA mA \ Notes: 1. At Ta = 25 °C. 2. Peak forward current at 1/10 Duty Cycle, 0.1ms Pulse. SPEC NO: DS10121729 REV: A.4 HTTP://WWW.DISPLAY-LEDS.COM CHECKED: Emily Zhou APPROVED: M.H. Lin TEL: 0086-574-86322282 PAGE: 3/3 DATE: Jul/20/2011