Resistors Make Possible Ceramic Ball Grid Termination Arrays Ceramic Ball Grid Ceramic Ball Grid CHC Series Termination Arrays Superior TaNFilm® resistors on ceramic substrate Termination Arrays High density networks on a reduced footprint High purity alumina substrate Excellent CHC Series high frequency performance ® • Superior TaNFilm resistors on ceramic substrate Standard tolerances to ±1% • Superior TaNFilm® resistors on ceramic substrate • High density networks on a reduced footprint RoHS compliant terminations • High density networks on a reduced available footprint • Excellent high frequency performance • Excellent high frequency performance Standard tolerances tolerancesto to±1% ±1% •• Standard •• RoHS RoHS compliant compliantterminations terminationsavailable available Ball grid terminations CHC Series High High purity alumina puritysubstrate alumina substrate Ball grid Ball grid terminations terminations All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2) IRC’s Chipscale terminal Chipscale on onceramic ceramicCHC CHCoffers offershigh highperformance performance terminal solutions solutions in in aa small smallsurface surfacemount mountpackage. package.Sn/Pb Sn/Pbsolder solderballs balls placed and placed on on aa ceramic ceramicsubstrate substratepermit permitvery verylow lowparasitic parasiticinductance inductance and capacitance. and reduces ground bounce. IRC’s proven capacitance.This Thisimproves improvesspeeds, speeds,lowers lowerspropagation propagationdelays, delays, and reduces ground bounce. IRC’s proven tantalum nitride thin film technology can handle the most demanding applications. tantalum nitride thin film technology can handle the most demanding applications. For all of your high density, small footprint termination needs, use IRC’s CHC Termination arrays. For all of your high density, small footprint termination needs, use IRC’s CHC Termination arrays. Electrical Data Electrical Data Package Package CB0565A CB0565A CB0565B CB0565B CD0865A CD0865A CD0865B CD0865B CD1065A CD1065A CD1065B CD1065B CC0910A CC0910B CC0910A CD0910A CC0910B CD0910B CD0910A Resistance Range (Ω) Resistance Absolute Tolerances Absolute 10Rtoto10.0K 4.7K 10R ±1%, ±5%±2% Range (Ω) 10R to 4.7K to 2.2K 10.0K 10R to 10R 10Rtoto4.7K 2.2K 10R 10Rtoto4.7K 4.7K 10R to 10.0K 10R to 4.7K Tolerances ±1%, ±2% ±1%,±5% ±2% ±5%±2% ±1%, ±5% ±1%, ±2% ±1%, ±2% 10R to 4.7K ±5% 10R to 2.2K ±5% ±1%, ±2% 10R to 4.7K ±1%, ±2% 10R to 10.0K ±5% 10R to 4.7K 10R to 4.7K 10R to 2.2K ±1%, ±2% ±1%, ±2% ±5% ±5% 10Rtoto4.7K 2.2K 10R ±1%,±2% ±2% ±1%, 10Rtoto10.0K 4.7K 10R ±5% ±5% 10R 10Rtoto2.2K 4.7K ±1%, ±1%,±2% ±2% 10R 10R to to 4.7K 10.0K ±5% ±5% 10R 10Rtoto4.7K 2.2K ±1%, ±1%,±2% ±2% 10R to 10.0K ±5% 10R to 2.2K ±1%, ±2% 10R to 4.7K ±5% 10R to 4.7K 10R to 10.0K ±100ppm/°C ±100ppm/°C ±100ppm/°C ±100ppm/°C ±5% ±100ppm/°C ±100ppm/°C ±100ppm/°C ±100ppm/°C ±100ppm/°C Rating 70°C* Temperature 0.6W 0.6W 1.2W 1.2W 1.6W 1.6W 0.1W -40°C to +85°C 0.1W -40°C to +85°C 1.2W 1.2W 1.2W ±1%, ±2% ±5% *Rated power is from 0°C to 70°C derated linearly to 0W at 85°C. ±100ppm/°C CD0910B General Note Rating 70°C* ±5% 10R to to 4.7K 10.0K 10R 10R to 4.7K Absolute TCR Package Power Element Power Operating Rating 70°C* 70°C* Package Power Rating Element Power Temperature Operating ±1%,±5% ±2% 10R to 2.2K 10R to 10.0K Absolute TCR 10R to 2.2K ±1%, ±2% 10R to 4.7K ±5% 1.2W IRC reserves the right to make changes in product specification without notice or liability. General All informationNote is subject to IRC’s own data and is considered accurate at time of going to print. TT Electronics reservesis thefrom right to0°C maketo changes in product specification without notice liability. *Rated power 70°C derated linearly to 0W ator85°C. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA All information subject to TT 361 Electronics’ data and is considered accurate at time of going to print. Telephone: 361 992is7900 • Facsimile: 992 3377 •own Website: www.irctt.com A subsidiary of TT electronics plc CHC Series Issue April 2011 Sheet 1 of 4 www.ttelectronicsresistors.com General Note © Electronics IRCTT reserves the right to plc make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. 07.14 A subsidiary of TT electronics plc Ceramic Ball Grid Ceramic Ball Grid Termination Arrays Termination Arrays CHC Series Make Possible Return Loss Data (50Ω Nominal) Average return loss for 0.65mm pitched bussed schematic for elements away from reference pins. For example: CB0565B, reference pins are A3 or B3 Average return loss for 1mm pitc hed bussed schematic respect to reference pin. Where reference pins are B1 to B9 referring to CC0910B schematic. 0 5 5 10 10 15 15 M a g n it u d e ( - d B ) M a g n it u d e ( - d B ) 0 20 25 30 35 20 25 30 35 40 40 45 45 50 50 0 5 10 15 20 25 30 35 0 40 2 4 6 Frequency (GHz) Typical Return Loss For CC0910B-01-50R0-F 8 10 Frequency (GHz ) 14 12 16 18 20 Typical Return Loss For CD1065B-01-50R0-F Eye Diagram Data Ideal Terminator IRC CHC-CC0910B-01-50R0-F Terminator 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 zs1 zs1 Impedance Response Data 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 Time, nsec Ideal 50 Terminator Impedance response to 100psec rising edge © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Time, nsec 0.8 0.9 1.0 1.1 1.2 IRC CHC-CC0910B-01-50R0-F Terminator Impedance response to 100psec rising edge CHC Series Issue April 2011 Sheet 2 of 4 www.ttelectronicsresistors.com © TT Electronics plc 07.14 Ceramic Ball Grid Termination Arrays CHC Series Ceramic Ball Grid Termination Arrays Make Possible Environmental Data Environmental Test Specification Typical Maximum Thermal shock MIL-PRF-83401 ±0.01% ±0.02% Low temperature operation MIL-PRF-83401 ±0.01% ±0.05% Short time overload MIL-PRF-83401 ±0.01% ±0.05% High temperature exposure MIL-PRF-83401 ±0.03% ±0.05% Effects of solder MIL-PRF-83401 ±0.01% ±0.05% MIL-STD-202, Method 206 65°C, 45% RH, with bias ±0.02% ±0.01% MIL-PRF-83401 ±0.01% ±0.02% Moisture resistance Life Physical Data and Schematic Diagrams for 1.0mm Pitch Series A A B B C C 0.64mm ±0.05 diameter solder bumps 9.00mm ±0.15mm 1.00mm ±0.25mm 1.00mm ±0.25mm 4.0mm ±0.15mm D D 1 2 3 4 5 6 7 8 1 9 CD0910A isolated schematic (view from top) 2 3 4 5 6 7 8 9 1 CD0910B bussed schematic (view from top) A A B B C 2 3 0.50mm ±0.25mm 4 5 6 7 8 9 0.63m m ±0.1mm 1.27m m ±0.16mm 0.64mm ±0.05 diameter solder bump s 9.00m m ±0.15mm 1.00m m ±0.25mm 1.00m m ±0.25mm 3.0m m ±0.15mm C 1 2 3 4 5 6 7 8 9 CC0910A isolated schematic (view from top) 1 2 3 4 5 6 7 8 9 CC0910B bussed schematic (view from top) 1 2 3 4 5 6 7 8 0.50mm ±0.25mm 9 1.27m m ±0.16m m 0.63m m ±0.1mm Note: Contact A1 indicator marked with dot on top of part. Coplanarity between solder bumps 0.06mm. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com CHC Series Issue April 2011 Sheet 3 of 4 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsresistors.com © TT Electronics plc 07.14 Ceramic Ball Grid Ceramic Ball Grid Termination Arrays Termination Arrays CHC Series Make Possible Physical Data and Schematic Diagrams for 0.65mm Pitch Series A 6.4m m ±0.1m m A 0.35mm diameter solder bump s 0.65mm B B C C 0 5 D D 2 3 4 5 6 7 8 9 10 1 CD1065A isolated schematic (view from top) 2 3 4 5 6 7 8 9 D B B A 10 A 2 3 4 5 B C C 7 6 8 9 10 0.64m m ±0.1m m 0.275mm ±0.1m m 20 0.38 mm ±0.1m m 25 30 35 5.1m m ±0.1m m 40 0.35mm diameter solder bump s 0.65mm 45 B 2.5mm ±0.1m m A 1 15 CD1065B bussed schematic (view from top) A 10 M a g n it u d e ( - d B ) 1 D Average return loss for 0.65mm pitched bussed schematic for elements0.65 away mmfrom reference pins. C CB0565B, reference pins are A3 or B3 For example: C 50 0 2 D 4 6 8 10 14 0.65mm 12 Frequency (GHz ) C 16 18 20 2.5mm ±0.1m m B A D D 1 2 3 4 5 6 7 8 CD0865A isolated schematic (view from top) 1 2 3 4 5 6 7 8 1 2 4 3 5 7 6 8 0.643mm ±0.1m m 0.275mm ±0.1m m CD0865B bussed schematic (view from top) 0.381mm ±0.1m m 3.2mm ±0.1mm A A B B 0.35mm diameter solder bump s 0.65mm B 1 2 3 4 5 CB0565A isolated schematic (view from top) CB0565B bussed schematic (view from top) 0.65mm A 1 2 3 4 5 0.275mm ±0.1mm 1.2mm ±0.1mm 0.64m m ±0.1mm 0.38mm ±0.1mm Note: Contact A1 indicator marked with dot on top of part. Coplanarity between solder bumps 0.06mm. Ordering Data Prefix CHC - CD0865 A - 01 - 51R1 - J Model CB0565 = 2 × 5, 0.65mm pitch array CD0865 = 4 × 8, 0.65mm pitch array CD1065 = 4 × 10, 0.65mm pitch array CC0910 = 3 × 9, 1.0mm pitch array CD0910 = 4 × 9, 1.0mm pitch array Schematic A = Isolated schematic with 60/40 Sn/Pb (0.65mm pitch) or 90/10 Pb/Sn (1.0mm pitch) terminations ALF = Isolated schematic with RoHS compliant terminations B = Bussed schematic with 60/40 Sn/Pb (0.65mm pitch) or 90/10 Pb/Sn (1.0mm pitch) terminations BLF = Bussed schematic with RoHS compliant terminations Absolute TCR Code 01 = ±100ppm/°C Four Digit Resistance Code Standard resistance values 10R0 = 10Ω; 15R0 = 15Ω; 22R0 = 22Ω; 33R0 = 33Ω; 47R0 = 47Ω; 50R0 = 50Ω; 51R1 = 51.1Ω; 75R0 = 75Ω; 1000 = 100Ω; 1001 = 1.00KΩ; 1002 = 10.0KΩ; 2201 = 2.20KΩ; 4701 = 4.70KΩ Absolute Tolerance Code J = ±5%; G = ±2%; F = ±1% © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com CHC Series Issue April 2011 Sheet 4 of 4 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsresistors.com © TT Electronics plc 07.14