10 Base-T Multiport Module for CS8904 Quad PHY ELECTRONICS, INC. EPE6320S • Cost competitive solution for 4 port 10 Base-T switches • • Also recommended for TI Quad PHY and similar quad chips • • Robust design allows for most severe soldering processes • • Complies with or exceeds IEEE Requirements • • Isolation : 1500 Vrms • Electrical Parameters @ 25°C Inductance Leakage (µH Min.)(1) Inductance (µH Max.)(1) @ 100 KHz, @1MHz, 20 mVrms 20mVrms Return Loss (dB Min.) Common Mode Rejection (dB Min.) 5 MHz - 10 MHz @ 1 - 100 @ 85 Ω to110 Ω MHz Xmit Rcv 100 0.5 0.4 -18 DCR DM-CM CM-DM DM-CM CM-DM Crosstalk Insertion Loss Interwinding (Ω Max.) (dB Min.) (dB Min.) (dB Min.)(dB Min.) (dB Min.) (dB Max.)(2) Capacitance (pF Min.) @ 400 MHz chip side @ 1-100 MHz @ 300 MHz 2.5-25 MHz Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv -40 -40 -30 -30 -15 -20 -15 -10 0.8 0.5 -45 5-20 MHz -1 -1 15 Notes: 1) Measured from chip side. 2) Insertion Loss @ 5MHz deviates @ 10 MHz by 0.2 dB Max. Schematic Transmit Channel 4, 6, 14, 16 Chip Side 37, 35, 27, 25 Media Side 3, 8, 13, 18 5, 7, 15, 17 Package 36, 34, 26, 24 1 CT : 2 Receive Channel 1, 9, 11, 19 A J 40, 32, 30, 22 Chip Side N Media Side 2, 10, 12, 20 39, 31, 29, 21 1:1 Pin 1 I.D. 40 PCA EPE6320S Date Code Q B Solder Pad Layout 1 21 Dimensions P 20 Dim. A B C D E F G H I J K L M N P Q M D K C L E H Documentor/Date PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 I G F √’d By Project Engineer/Date CSE6320S (Inches) Min. Max. Nom. 1.110 .470 .250 --.010 --.590 .016 .008 --0° .025 --------- 1.130 .490 .270 --.015 --.610 .022 .012 --8° .045 --------- Engineering/Date Rev. 3 10/7/98 Product performance is limited to specified parameters. Data is subject to change without prior notice. 1.120 .480 .260 .950 .0125 .050 .600 .019 .010 .085 --.035 .030 .050 .090 .670 Min. (Millimeters) Max. Nom. 28.19 11.94 6.35 --.254 --14.99 .406 .203 --0° .635 --------- 28.70 12.45 6.86 --.381 --15.49 .559 .305 --8° 1.14 --------- 28.45 12.19 6.60 24.13 .317 1.27 15.24 .483 .254 2.16 --.889 .762 1.27 2.29 17.02 Quality Assurance/Date TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com