80W Power Supply Constant Current Mode 80-LCCH Series www.linkcom.com.tw For more information, please contact with: [email protected] FEATURES: ● AC Input 90~305 Vac Nominal ● Power Factor: > 0.98 @ 115 Vac / > 0.93 @ 230 Vac; @ full load ● Protection: SCP / OVP / OTP ● High Operating Ambient Temp.: -30 ℃ ~ +70 ℃ (refer to dreating curve) ● Surge Protection: L-N 2 kV, L/N-FG 4 kV ● Safety: UL / PSE ● EMI: Meets FCC/ Meets CE ● Comply with Indoor/Outdoor Waterproof (IP 67) ● Warranty: 5 years (refer to LinkCom warranty policy) ● RoHS Compliant PRODUCT SPECIFICATION DC OUTPUT POWER(W) DC OUTPUT VOLTAGE(V) OUTPUT CURRENT(A) OUTPUT CURRENT TOLERANCE EFFICIENCY O/P NOISE(P-P,V) LCCH-080U120-00 80.4 8.5-12 6.7 ±5% 87% 0.5 LCCH-080U240-00 81.6 18-24 3.4 ±5% 88% 0.5 LCCH-080U300-00 81 24-30 2.7 ±5% 88% 0.5 LCCH-080U360-00 82.8 30-36 2.3 ±5% 90% 0.5 LCCH-080U420-00 79.8 34-42 1.9 ±5% 90% 0.5 LCCH-080U480-00 80 40-48 1.7 ±5% 90% 0.5 MODEL ELECTRICAL SPECIFICATION INPUT VOLTAGE RANGE 90-305 Vac, 127-431 Vdc, Normal: 100-277 Vac INPUT FREQUENCY Range: 47-63 Hz, Normal: 50-60 Hz ACTIVE POWER FACTOR > 0.98 @ 115 Vac / > 0.93 @ 230 Vac at Full Load and Rated Output Voltage THD < 20% TURN ON DELAY TIME <1.5 s at Full Load 120-277Vac AC CURRENT 1.5 A / 115 Vac 0.56 A / 230 Vac INRUSH CURRENT (Max) Cold Start 65 A @ 230 Vac LEAKAGE CURRENT SHORT CIRCUIT PROTECTION < 0.45 mA / 264 Vac short circuit protection will restart automatically after the fault condition is removed OVER VOLTAGE PROTECTION OVER TEMP. PROTECTION shut down and latch off o/p voltage , re-power on to recover -30℃ ~ +70 ℃ (refer to dreating curve) OPERATING TEMP. STORAGE TEMP. -40℃~+80℃ RELATIVE HUMIDITY 10% to +90%, non-cond. SAFETY UL60950-1 / PSE EMI Meets EN55015 / Meets FCC part 15 WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P: 3 kVac, O/P-Grnd: 1.5 kVac, I/P-Grnd: 1.5 kVac I/P-O/P, I/P-FG,O/P-FG :10M Ω / 500 Vdc / 25℃ / 70% RH DIMENSION (L*W*H) 208.4 * 72 * 38.5 mm【8.2 * 2.83 * 1.52 inch】 (1) All parameters specified at 230 Vac input unless otherwise noted (2) All specifications Typical at 25℃, unless otherwise noted, at normal line and load. (3) Ripple and Noise measured directly at pins/terminals at nom. load, 0.1uF bypass and 47uF electrolytic, pk-pk at 20MHz bandwidth. (4) Specified for free-air convection cooling. (5) Minimum load is NOT required for proper operation . (6) 100% Production Tested. ＊REFERENCE: www.linkcom.com.tw ＊Please contact [email protected], [email protected] for more information Linkcom Manufacturing Co., Ltd. 5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw 80W Power Supply Constant Current Mode 80-LCCH Series www.linkcom.com.tw For more information, please contact with: [email protected] DIMENSIONS Tc Max. LCCH-080U420 as Tc Max. Reference ＊REFERENCE: www.linkcom.com.tw Linkcom Manufacturing Co., Ltd. 5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw 80W Power Supply Constant Current Mode 80-LCCH Series www.linkcom.com.tw For more information, please contact with: [email protected] Output Current vs. Load(LCCH-080P480-E0) Output Current vs. Load Output Current (A) 1.740 1.720 1.700 Vin=100 Vin=120 1.680 Vin=200 Vin=230 Vin=277 1.660 65% 70% 75% 80% 85% 90% 95% 100% 105% Load (%) Efficiency vs. Load(LCCH-080P480-E0) Efficiency vs. Load Efficiency (%) 95% 90% Vin=100 85% Vin=120 Vin=200 Vin=230 Vin=277 80% 65% 70% 75% 80% 85% 90% 95% 100% 105% Load (%) PF vs. Load(LCCH-080P480-E0) PF vs. Load Power Factor 1.00 0.95 0.90 Vin=100 Vin=120 0.85 Vin=200 Vin=230 Vin=277 0.80 65% 70% 75% 80% 85% 90% 95% 100% 105% Load (%) Linkcom Manufacturing Co., Ltd. 5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw 80W Power Supply Constant Current Mode 80-LCCH Series www.linkcom.com.tw For more information, please contact with: [email protected] THD vs. Load(LCCH-080P480-E0) THD vs. Load 30% 25% THD (%) 20% 15% Vin=100 10% Vin=120 Vin=200 5% Vin=230 Vin=277 0% 65% 70% 75% 80% 85% 90% 95% 100% 105% Load(%) Linkcom Manufacturing Co., Ltd. 5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw