ETC OPB831W Slotted optical switch opb830 and opb840 series (l & w) Datasheet

Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
Features:
•
•
•
•
•
•
•
0.125” (3.18 mm) wide slot
Choice of electrical output parameters
Choice of aperture
Choice of opaque or IR transmissive shell material
Side mount configuration
Choice of lead spacing (L Series)
24” [610 mm] 26 AWG wire leads (W Series)
L Package
Product Photo Here
W Package
Description:
OPB830 and OPB840 series provide the design engineer with the flexibility of a custom device from a standard
product line. The L Series offers a choice of PCBoard mount lead spacing, while the W Series offers
24” (610mm) 26AWG wire leads.
Building from a standard housing that utilizes a .375” (9.5 mm) wide slot, a user can specify the electrical output
parameters, choice of aperture, discrete shell material, side mount configuration, and a choice of lead spacing (for
the L Series) or 24” [610 mm] UL approved 26 AWG wire leads (W Series).
Housings are made from an opaque grade of injection-molded plastic that minimizes the assembly’s sensitivity to
visible and near-infrared ambient radiation. Discrete shells (exposed on the parallel faces inside the device throat)
are made of either IR transmissive plastic (for applications where aperture contamination may occur) or of opaque
plastic with aperture openings (for maximum protection against ambient light).
Switching of the phototransistor occurs whenever an opaque object passes through the slot and interrupts the
beam.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
Applications:
•
•
•
•
•
Non-contact interruptive object sensing
Assembly line automation
Machine automation
Equipment security
Machine safety
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.2 10/08
Page 1 of 8
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
OPB830/840L Series
1
2
3
4
Pin # / Color
Description
1 / Black
Cathode
2 / Red
Anode
3 / White
Collector
4 / Green
Emitter
OPB830/840W Series
DIMENSIONS ARE IN:
[ MILLIMETERS]
INCHES
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2
10/08
Page 2 of 8
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
Part Number Guide — OPB8XX
OPB 8 X X L X X
Optek Assembly
Sensor Aperture:
1 — 0.010” (0.25 mm)
5 — 0.050” (1.27 mm)
Phototransistor Output Family
Emitter Aperture:
1 — 0.010” (0.25 mm)
5 — 0.050” (1.27 mm)
Discrete Shell Material:
3 — Side mount IR transmissive
Plastic discrete shell
4 — Side mount opaque
Plastic discrete shell
Mounting configurations:
L — Solder lead termination
Electrical Specification Variations:
0 = Electrical Parameter A - (0.320” lead spacing)
1 = Electrical Parameter B - (0.320” lead spacing)
2 = Electrical Parameter C - (0.320” lead spacing)
5 = Electrical Parameter A - (0.220” lead spacing)
6 = Electrical Parameter B - (0.220” lead spacing)
7 = Electrical Parameter C - (0.220” lead spacing)
Notes:
•
Assemblies with dual 0.010” apertures are
currently available with electrical parameter
“A” only.
Part Number Guide — OPB8XX
OPB 8 X X W X X Z
Optek Assembly
Sensor Aperture:
1 — 0.010” (0.25 mm)
5 — 0.050” (1.27 mm)
Phototransistor Output Family
Emitter Aperture:
1 — 0.010” (0.25 mm)
5 — 0.050” (1.27 mm)
Discrete Shell Material:
3 — Side mount IR transmissive
Plastic discrete shell
4 — Side mount opaque
Plastic discrete shell
Mounting configurations:
W — Wire termination
• Parts ending with “Z” meet
RoHS requirements
• Wires = 26 AWG—24” Long
Electrical Specification Variations:
0 = Electrical Parameter A
1 = Electrical Parameter B
2 = Electrical Parameter C
Notes:
•
Assemblies with dual 0.010” apertures are
currently available with electrical parameter
“A” only.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.2 10/08
Page 3 of 8
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage and Operating Temperature
L Series(1)
W Series(1)
-40° C to +85°C
-40° C to +80°C
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](2)
260°C
Input Diode
Forward DC Current
50 mA
Peak Forward Current (1 µs pulse width, 300 pps)
1A
Reverse DC Voltage
2V
Power Dissipation
(1)
100 mW
Output Phototransistor
Collector-Emitter Voltage
30 V
Emitter-Collector Voltage
5V
Collector DC Current
Power Dissipation
30 mA
(1)
100 mW
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
TEST CONDITIONS
Input Diode LED (See OP240 for additional information—for reference only)
VF
Forward Voltage
-
-
1.7
V
IF = 20 mA
IR
Reverse Current
-
-
100
µA
VR = 2 V
Output Transistor (See OP550 for additional information—for reference only)
V(BR)CEO
Collector-Emitter Breakdown Voltage
30
-
-
V
IC = 1 mA
V(BR)ECO
Emitter-Collector Breakdown Voltage
5
-
-
V
IE = 100 µA
Collector-Emitter Dark Current
-
-
100
nA
VCE = 10 V
ICEO
Notes:
(1) Derate linearly 1.67 mW/° C above 25° C for L Series.
(2) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(3) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and
ketones.
(4) The W Series includes wire terminations of 24” (610 mm) 7-strand, 26 AWG UL insulated wire on each terminal. Each device
incorporates a wire strain relief at the housing surface. The insulation functions and colors are: anode (red), cathode (black),
phototransistor collector (white) and phototransistor emitter (green).
(5) All parameters tested using pulse technique.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2
10/08
Page 4 of 8
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
TEST CONDITIONS
-
-
0.4
V
IC = 400 µA, IF = 20 mA
Parameter B (OPB831L,OPB841L)
(OPB836L,OPB846L)
(OPB831W,OPB841W)
(OPB836W,OPB846W)
-
-
0.4
V
IC = 800 µA, IF = 10 mA
Parameter C (OPB832L,OPB842L)
(OPB837L,OPB847L)
(OPB832W,OPB842W)
(OPB837W,OPB847W)
-
-
0.6
V
IC = 1800 µA, IF = 20 mA
-
-
Combined
Collector-Emitter Saturation Voltage
Parameter A (OPB830L,OPB840L)
(OPB835L, OPB845L)
(OPB830W,OPB840W)
(OPB835W, OPB845W)
VCE(SAT)
On-State Collector Current
Parameter A (OPB830L,OPB840L)
(OPB835L, OPB845L)
0.625
(OPB830W,OPB840W)
(OPB835W, OPB845W)
IC(ON)
Parameter B (OPB831L,OPB841L)
(OPB836L,OPB846L)
(OPB831W,OPB841W)
(OPB836W,OPB846W)
1.250
-
-
Parameter C (OPB832L,OPB842L)
(OPB837L,OPB847L)
(OPB832W,OPB842W)
(OPB837W,OPB847W)
2.250
-
-
mA
VCE = 10 V, IF = 20 mA
mA
VCE = 5 V, IF = 10 mA
mA
VCE = .6 V, IF = 20 mA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.2 10/08
Page 5 of 8
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
OPB370T11
OPB8_
_ L11 -- Flag
Flag Next
NexttotoEmitter
Emitter
OPB370T11
Flag Next
OPB8_
_ L11 -- Flag
Nextto
toSensor
Sensor
1.20
1.20
Top to Bottom
Top to Bottom
1.00
Typical IC(ON) Response (mA)
Typical IC(ON) Response (mA)
1.00
0.80
0.80
Left to Right
Right to Left
Right to Left
Left to Right
0.60
0.60
0.40
0.40
0.20
0.20
0.00
0.00
0.00
0.05
0.10
0.15
0.20
0.25
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
Displacement Distance (inches)
OPB370T11
Middle
of Slot
OPB8_
_ L11- -Flag
Flaginin
Middle
of Slot
1.20
Top to Bottom
Typical IC(ON) Response (mA)
1.00
0
Top to Bottom
0.80
Right to Left
Left to Right
0.60
Emitter
Left to Right
Right to Left
0.40
Sensor
0
0.20
Width
0.00
0.00
0.05
0.10
0.15
0.20
0.25
Diisplacement Distance (inches)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2
10/08
Page 6 of 8
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
OPB370N51
Middle
of Slot
OPB8_
_ L51 -- Flag
Flagin
Next
to Emitter
OPB370N51
Flag Next
Next to
OPB8_
_ L51 -- Flag
toSensor
Sensor
1.20
1.20
Top to Bottom
Top to Bottom
1.00
Typical IC(ON) Response (mA)
Typical IC(ON) Response (mA)
1.00
0.80
Left to Right
Right to Left
0.60
0.40
0.20
Left to Right
Right to Left
0.60
0.40
0.20
0.00
0.00
0.80
0.00
0.05
0.10
0.15
0.20
0.25
0.00
0.05
Displacement Distance (inches)
0.10
0.15
0.20
0.25
Displacement Distance (inches)
OPB370N51
of of
Slot
OPB8_
_ L51--Flag
FlagininMiddle
Middle
Slot
1.20
Top to Bottom
Typical IC(ON) Response (mA)
1.00
0
Top to Bottom
0.80
Left to Right
Right to Left
0.60
Emitter
Left to Right
Right to Left
0.40
Sensor
0
0.20
Width
0.00
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.2 10/08
Page 7 of 8
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
OPB380T55
Flag Next
OPB8_
_ L55 -- Flag
Nextto
toEmitter
Emitter
OPB380T55
Flag Next
OPB8_
_ L55 --Flag
Nextto
toSensor
Sensor
1.20
1.20
Top to Bottom
Top to Bottom
1.00
Typical IC(ON) Response (mA)
Typical IC(ON) Response (mA)
1.00
0.80
Right to Left
Left to Right
0.60
0.40
0.20
0.80
Right to Left
Left to Right
0.60
0.40
0.20
0.00
0.00
0.00
0.05
0.10
0.15
0.20
0.25
0.00
0.05
Displacement Distance (inches)
0.10
0.15
0.20
0.25
Displacement Distance (inches)
OPB380T55
of of
Slot
OPB8_
_ L55--Flag
FlagininMiddle
Middle
Slot
1.20
Top to Bottom
1.00
Typical IC(ON) Response (mA)
0
Top to Bottom
0.80
Right to Left
Left to Right
0.60
Emitter
Left to Right
Right to Left
0.40
Sensor
0
0.20
Width
0.00
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2
10/08
Page 8 of 8
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Similar pages