LM741/E/I SINGLE OPERATIONAL AMPLIFIER SINGLE OPERATIONAL AMPLIFIERS 8 DIP The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. It is intended for a wide range of analog applications. The high gain and wide range of operating voltage provide superior performance in integrator, summing amplifier, and general feedback applications. 8 SOP FEATURES • • • • • Short circuit protection Excellent temperature stability Internal frequency compensation High Input voltage range Null of offset BLOCK DIAGRAM ORDERING INFORMATION Device LM741N Package 8 DIP LM741EN LM741M Operating Temperature 0 ~ + 70°C 8 SOP LM741EM LM741IN 8 DIP LM741EIN LM741IM -40 ~ +85 °C 8 SOP LM741EIM SCHEMATIC DIAGRAM Rev. B 1999 Fairchild Semiconductor Corporation LM741/E/I SINGLE OPERATIONAL AMPLIFIER ABSOLUTE MAXIMUM RATINGS (TA=25 ° C) Characteristic Symbol LM741 LM741E LM741I Unit VCC ±18 ±22 ±18 V VI(DIFF) 30 30 30 V VI ±15 ±15 ±15 V Indefinite Indefinite Indefinite Supply Voltage Differential Input Voltage Input Voltage Output Short Circuit Duration PD 500 500 500 mW Operating Temperature Range TOPR 0 ~ + 70 0 ~ + 70 -40 ~ + 85 °C Storage Temperature Range TSTG -65 ~ + 150 -65 ~ + 150 -65 ~ + 150 °C Power Dissipation ELECTRICAL CHARACTERISTICS (VCC = 15V, VEE = - 15V. TA = 25 °C, unless otherwise specified) Characteristic Symbol Input Offset Voltage VIO Input Offset Voltage Adjustment Range VIO(R) Input Offset Current Test Conditions Min LM741E Typ Max RS≤10KΩ RS≤50Ω 0.8 VCC = ±20V LM741/LM741I Min Typ Max 2.0 6.0 mV 3.0 ±10 ±15 mV IIO 3.0 30 20 200 Input Bias Current IBIAS 30 80 80 500 Input Resistance RI Input Voltage Range VCC =±20V VI(R) Unit nA nA 1.0 6.0 0.3 2.0 MΩ ±12 ±13 ±12 ±13 V 20 200 VCC =±20V, Large Signal Voltage Gain GV RL≥2KΩ VO(P.P) =±15V 50 V/mV VCC =±15V, VO(P.P) =±10V Output Short Circuit Current ISC 10 VCC = ±20V Output Voltage Swing VO(P.P) VCC = ±15V Common Mode Rejection Ratio CMRR Power Supply Rejection Ratio RL≥10KΩ ±16 RL≥10KΩ ±15 25 mA V ±12 ±14 RL≥10KΩ ±10 ±13 70 90 RS≤10KΩ, VCM = ±12V RS≤50KΩ, VCM = ±12V 80 95 VCC = ±15V to VCC = ±15V 86 96 VCC = ±15V to VCC = ±15V RS≤10KΩ 35 RL≥10KΩ RS≤50Ω PSRR 25 dB dB 77 96 LM741/E/I SINGLE OPERATIONAL AMPLIFIER ELECTRICAL CHARACTERISTICS Characteristic Symbol Transient Rise Time tR Response Overshoot OS (Continued) Test Conditions Unity Gain Bandwidth BW Slew Rate SR Unity Gain Supply Current ICC RL= ∞Ω Power Consumption Min 6.0 0.43 1.5 0.3 0.7 VCC = ±20V PC LM741E Typ Max 0.25 0.8 80 LM741/LM741I Min Typ Max 0.3 20 10 Unit µs % MHz 0.5 V/µs 1.5 2.8 50 85 150 VCC = ±15V mA mW ELECTRICAL CHARACTERISTICS ( -40 °C ≤TA≤85 °C for the KA741I °C ≤T A≤70 °C for the LM741 and LM741E. VCC = ±15V, unless otherwise specified) Characteristic Input Offset Voltage Input Offset Voltage Drift Input Offset Current Input Offset Current Drift Symbol VIO RS≤50Ω 0.5 ±12 VO(P.P) ±16 RS≥2KΩ ±15 PSRR 10 GV 40 RS≤10KΩ, VCM = ±12V 80 95 VCC = ±20V RS≤50Ω 86 96 to ±5V RS≥2KΩ 0.8 RS≤10KΩ ±13 V ±12 ±14 V ±10 ±13 10 40 mA 90 dB 77 96 dB 32 VCC = ±15V, VO(P.P) = ±10V VCC = ±15V, VO(P-P) = ±2V µA ±12 70 RS≤50KΩ, VCM = ±12V VCC = ±20V, VO(P-P) = ±15V Large Signal Voltage Gain ±13 RS≥2KΩ ISC nA MΩ RS≥10KΩ VCC =±15V Power Supply Rejection Ratio RS≥10KΩ mV nA/ °C 0.5 VI(R) CMRR 300 0.21 VCC = ±20V Unit µV/ °C 15 VCC =±20V Common Mode Rejection Ratio 7.5 ∆IIO/∆T RI LM741/LM741I Min Typ Max RS≤10KΩ 70 IBIAS Output Short Circuit Current LM741E Typ Max 4.0 IIO Input Resistance Output Voltage Swing Min ∆VIO/∆T Input Bias Current Input Voltage Range Test Conditions 15 10 V/mV LM741/E/I SINGLE OPERATIONAL AMPLIFIER TYPICAL PERFORMANCE CHARACTERISTICS LM741/E/I SINGLE OPERATIONAL AMPLIFIER LM741/E/I SINGLE OPERATIONAL AMPLIFIER TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.