Panasonic MAZT068H Esd diodes silicon planar type Datasheet

ESD Diodes
MAZT000H Series
Silicon planar type
Unit: mm
0.28±0.05
0.80±0.05
(0.44)
0.12+0.05
–0.02
0.88+0.05
–0.03
3˚
(0.44)
1 2
1.60±0.05
• Two elements anode-common type
• Ptot = 150 mW
(0.80)
3
■ Features
0.28±0.05
(0.51)
(0.51)
(0.80) (0.80)
0.60+0.05
–0.03
1.60+0.05
–0.03
Symbol
Rating
Unit
Ptot
150
mW
Junction temperature
Tj
150
°C
Storage temperature
Tstg
−55 to +150
°C
(0.15)
Parameter
0 to 0.1
3˚
■ Absolute Maximum Ratings Ta = 25°C
Total power dissipation *
(0.375)
For surge absorption circuit
1: Cathode 1
2: Cathode 2
3: Anode 1, 2
SSMini3-F2 Package
EIAJ: SC-89
Note) *: With a printed circuit board
Internal Connection
3
1
2
■ Common Electrical Characteristics Ta = 25°C *1
Parameter
Zener voltage*2
Symbol
VZ
Conditions
IZ
Min
Typ
Specified value
Zener knee operating resistance
RZK
IZ
Specified value
Zener operating resistance
RZ
IZ
Specified value
Reverse current
IR
VR
Specified value
Max
Unit
V
Refer to the list of the
electrical characteristics
within part numbers
Ω
Ω
µA
Note) 1. Test method according to the JIS C7031 testing
2. Electrostatic breakdown voltage is ±10 kV
Test method: IEC1000-4-2 (C = 150 pF, R = 330 Ω, Contact discharge: 10 times)
3. *1: The VZ value is for the temperature of 25°C. In other cases, carry out the temperature compensation.
*2: Guaranteed at 20 ms after power application.
Publication date: February 2002
SKE00013BED
1
MAZT000H Series
■ Electrical characteristics within part numbers Ta = 25°C
Zener voltage
Part number
Reverse current
VZ (V)
IR (µA)
Zener operating
resistance
RZ (Ω) RZK (Ω)
IZ = 5 mA IZ = 0.5 mA
Max
Max
Marking symbol
Min
Nom
Max
IZ
(mA)
Max
VR
(V)
MAZT062H
5.8
6.2
6.6
5
0.2
4
50
100
6.2Z
MAZT068H
6.4
6.8
7.2
5
0.1
4
30
60
6.8Z
MAZT082H
7.7
8.2
8.7
5
0.1
5
30
60
8.2Z
MAZT100H
9.4
10.0
10.6
5
0.05
7
30
60
10Z
MAZT120H
11.4
12.0
12.7
5
0.05
9
30
80
12Z
Note) 1. The VZ value is the one after power application for 20 ms at Ta = 25°C.
2. The zener voltage temperature coefficient is the one for Tj = 25°C to 150°C.
Ptot  Ta
I Z  VZ
250
100
IF  V F
100
Ta = 25°C
10 mm 10 mm A
Ta = 25°C
0.8 mm
Print foil
t = 0.035 mm
0
40
80
120
160
200
4
Ambient temperature Ta (°C)
6
Zener operating resistance RZ (Ω)
MAZT062H
MAZT120H
10
MAZT100H
MAZT082H
MAZT068H
1
0.5
0.3
0.1
1
3
5
10
30 50
Zener current IZ (mA)
2
100
Temperature coefficient of zener voltage SZ (mV / °C)
Ta = 25°C
3
MAZT120H
0.1
8
10
12
14
0
0.2
0.4
12
0.6
0.8
1.2
Ct  VR
30
Ta = 25°C to 150°C
Ta = 25°C
MAZT120H
10
25
8
MAZT100H
6
MAZT082H
4
MAZT068H
2
0
1.0
Forward voltage VF (V)
SZ  IZ
50
5
1
Zener voltage VZ (V)
RZ  IZ
100
30
10
0.01
0.001
Terminal capacitance Ct (pF)
0
0.01
MAZT100H
50
0.1
MAZT082H
100
1
MAZT068H
150
Forward current IF (mA)
10
MAZT062H
200
Zener current IZ (mA)
Power dissipation Ptot (mW)
K
MAZT062H
0
10
20
30
40
50
Zener current IZ (mA)
SKE00013BED
20
MAZT068H
15
MAZT062H
MAZT082H
10
MAZT100H
5
60
0
MAZT120H
0
2
4
6
8
10
Reverse voltage VR (V)
12
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the
"Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial
property, the granting of relative rights, or the granting of any license.
(3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
• Any applications other than the standard applications intended.
(4) The products and product specifications described in this material are subject to change without
notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to
make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, redundant design is recommended,
so that such equipment may not violate relevant laws or regulations because of the function of our
products.
(6) When using products for which dry packing is required, observe the conditions (including shelf life
and after-unpacking standby time) agreed upon when specification sheets are individually exchanged.
(7) No part of this material may be reprinted or reproduced by any means without written permission
from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic
semiconductor products best suited to their applications.
Due to modification or other reasons, any information contained in this material, such as available
product types, technical data, and so on, is subject to change without notice.
Customers are advised to contact our semiconductor sales office and obtain the latest information
before starting precise technical research and/or purchasing activities.
B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but
there is always the possibility that further rectifications will be required in the future. Therefore,
Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material.
C. These materials are solely intended for a customer's individual use.
Therefore, without the prior written approval of Panasonic, any other use such as reproducing,
selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR
Similar pages