HMC812ALC4 v05.1115 Typical Applications Features The HMC812ALC4 is ideal for: Wide Bandwidth: 5 - 30 GHz • Point-to-Point Radio Excellent Linearity: +28 dBm Input IP3 • VSAT Radio High Power Handling: +25 dBm Input P1dB • Test Instrumentation Wide Attenuation Range: 30 dB PR EL IM IN AR Y ATTENUATORS - ANALOG - SMT GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 30 GHz 24 Lead Ceramic 4x4 mm SMT Package: 16mm² • Microwave Sensors • Military, ECM & Radar Functional Diagram General Description The HMC812ALC4 is an absorptive Voltage Variable Attenuator (VVA) which operates from 5 - 30 GHz and is ideal in designs where an analog DC control signal must be used to control RF signal levels over a 30 dB amplitude range. It features two shunt-type attenuators which are controlled by two analog voltages, Vctrl1 and Vctrl2. Optimum linearity performance of the attenuator is achieved by first varying Vctrl1 of the 1st attenuation stage from -3V to 0V with Vctrl2 fixed at -3V. The control voltage of the 2nd attenuation stage, Vctrl2, should then be varied from -3V to 0V, with Vctrl1 fixed at 0V. The HMC812LC4 is housed in a RoHS compliant 4x4 mm QFN leadless ceramic package However, if the Vctrl1 and Vctrl2 pins are connected together it is possible to achieve the full analog attenuation range with only a small degradation in input IP3 performance. Applications include AGC circuits and temperature compensation of multiple gain stages in microwave point-to-point and VSAT radios. Electrical Specifications, TA = +25° C, 50 Ohm system Parameter Typ. Max. Units 2 3 4 dB dB dB Attenuation Range 30 dB Input Return Loss 12 dB Output Return Loss 8 dB Input Power for 1 dB Compression (any attenuation) 25 dBm Input Third Order Intercept (Two-tone Input Power = 10 dBm Each Tone) 28 dBm Insertion Loss 1 Min. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 5 - 16 GHz 16 - 24 GHz 24 - 30 GHz For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC812ALC4 v05.1115 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 30 GHz Control Voltages RF Input Power +30 dBm Vctrl1 -3 to 0V @ 10 µA Control Voltage Range +1 to -5V Vctrl2 -3 to 0V @ 10 µA Channel Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 16.4 mW/ °C above 85 °C) 1.07 W Thermal Resistance (Channel to ground paddle) 61 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C PR EL IM IN AR Y ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing ATTENUATORS - ANALOG - SMT Absolute Maximum Ratings NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA. 2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL. 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C – 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish HMC812ALC4 Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H812A XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 2 HMC812ALC4 v05.1115 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 30 GHz 3 Pin Number Function Description 1, 2, 6 - 8, 11 - 13, 17 - 24 N/C These pins are not connected internally, however these pins must be connected to RF/DC ground externally. 3, 5, 14, 16 GND These pins and the exposed ground paddle must be connected to RF/DC ground. 4 Interface Schematic PR EL IM IN AR Y ATTENUATORS - ANALOG - SMT Pin Descriptions RFIN This pad is DC coupled and matched to 50 Ohms. A blocking capacitor is required if RF line potential is not equal to 0V. 15 9 10 RFOUT Vctrl1 Control Voltage 1 Vctrl2 Control Voltage 2 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC812ALC4 v05.1115 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 30 GHz For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D ATTENUATORS - ANALOG - SMT PR EL IM IN AR Y Application Circuit 4 HMC812ALC4 v05.1115 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 30 GHz PR EL IM IN AR Y ATTENUATORS - ANALOG - SMT Evaluation PCB List of Materials for Evaluation PCB TBD Item Description J1, J2 2.9 mm PC Mount RF Connector J3, J4 DC Pin C1, C2 100 pF Capacitor, 0402 Pkg. C3, C4 1000 pF Capacitor, 0402 Pkg. C5, C6 4.7 µF Capacitor, CASE A U1 HMC812ALC4 Analog VVA PCB [2] 123766 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Analog Devices upon request. [2] Circuit Board Material: Arlon 25FR or Rogers 4350 5 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D