BOT OPI3000MC Optically coupled isolator 30kv isolation Datasheet

OPI 3000MC
Optically Coupled Isolator
30kV Isolation
The OPI 30000P Optically Coupled Isolator consist of a
Infrared emitter coupled to a silicon photo transistor by a
polymer fibre. The series is designed for applications requiring
high voltage isolation between input & output.
•
30kV Isolation
•
High current transfer ratio,>50% @10mA
•
Plastic component version OPI30000P available.
DRAFT
MECHANICAL DATA
60.0
A
7.0
K
7.0
2.54
B
E
LEADS 11mm min
0.4/0.47 diam
C
2.54mm Pin
Circle
OPI3000MC
BEDFORD OPTO
Anode Yellow Dot
ABSOLUTE MAXIMUM RATINGS (25OC unless otherwise noted)
INPUT DIODE
FORWARD DC CURRENT
REVERSE DC VOLTAGE
POWER DISSIPATION
250mA
5 Volts
170mW (ii)
OUTPUT TRANSISTOR
COLLECTOR-EMITTER VOLTAGE
COLLECTOR CURRENT
POWER DISSIPATION
70 Volts
50 mA
250mW (iii)
OPERATING TEMP
-25OC TO +100OC
STORAGE TEMP
-25OC TO +100OC
INPUT-TO-OUTPUT ISOLATION VOLTAGE
+ 30KV DC (i)
SOLDERING TEMP 1.6mm from body max 5secs
240 OC
BEDFORD OPTO TECHNOLOGY LTD
1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: [email protected]
1/2
27.08.04
ISS A
OPI 3000MC
DRAFT
i)
Based on mechanical spacing,not measured
ii)
Thermal resistance 450 K/W
iii) Thermal resistance 400 K/W
Whilst the devices are capable of operating continually at the noted elevated temperatures users
should be aware of the possibility of a reduction in CTR over long periods at high temperatures
& currents.
OPTO ELECTRONIC DATA (TA = 25OC)
PARAMETER
SYMBOL
MIN
TYP
MAX
UNITS
TEST CONDITIONS
Forward Voltage
VF
-
-
1.3
V
If = 20mA
Reverse Voltage
VR
5.0
-
-
V
Ir = 100uA
BVceo
70
-
-
V
Ic = 10 uA
Iceo
-
-
10
nA
Vce = 10 V
BVeco
5.0
-
-
V
Ic = 100uA
INPUT DIODE
OUTPUT TRANSISTOR
Collector-Emitter Breakdown
Voltage
Collector-Emitter Leakage Current
Emitter-Collector Breakdown
COUPLED PAIR
DC Current Transfer Ratio
IC/IF
OPI 3000P
-
50
-
-
%
If = 10 mA Vce
Isolation Voltage
VISO
30
-
-
KV
-
VCE(SAT)
-
-
0.4
V
If = 10 mA,
Turn-on time
t on
-
8
-
uS
Ic=2mA
Turn-off time
t off
-
8
-
uS
Vcc = 5V
Collector-emitter saturation voltage
OPTO COUPLER RANGE
OPI110 TUBULAR 10kV ATEX CERTIFIED
OPI1264 TUBULAR 10kV ATEX CERTIFIED
OPI1000L
SURFACE MOUNT
ATEX CERTIFIED
OPI2000M HIGH SPEED SURFACE MOUNT ATEX CERTIFIED
OPI2000MK HIGH SPEED HIGH CMR
BOT32 PHOTO RESISTOR OUTPUT
BEDFORD OPTO TECHNOLOGY LTD
1 BIGGAR BUSINESS PARK, BIGGAR LANARKSHIRE, ML12 6FX
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: [email protected]
2/2
27.08.04
ISS A
Similar pages