AC Film Capacitors, Motor Run Capacitors Series/Type: B32322 The following products presented in this data sheet are being withdrawn. Ordering Code B32322B4106J010 B32322C1406J030 B32322C1306J030 Substitute Product Date of Withdrawal 2013-03-15 2013-10-25 2013-10-25 Deadline Last Orders 2013-06-15 2014-01-25 2014-01-25 Last Shipments 2013-09-15 2014-04-25 2014-04-25 Ordering Code B32322C1206J030 B32322C1126J030 B32322C1106J030 B32322B4805J010 B32322B4606J010 B32322B4605J010 B32322B4506J010 B32322B4505J010 B32322B4456J010 B32322B4305J010 B32322B4256J010 B32322B4186J030 B32322B4186J010 B32322B4126J010 Substitute Product B32322D4805J010 B32322D4606J010 B32322D4605J010 B32322D4506J010 B32322D4505J010 B32322D4305J010 B32322D4256J010 B32322D4186J010 B32322D4126J010 Date of Withdrawal 2013-10-25 2013-10-25 2013-10-25 2013-10-25 2013-10-25 2013-10-25 2013-10-25 2013-10-25 2013-02-08 2013-10-25 2013-10-25 2013-10-25 2013-10-25 2013-10-25 Deadline Last Orders 2014-01-25 2014-01-25 2014-01-25 2014-01-25 2014-01-25 2014-01-25 2014-01-25 2014-01-25 2013-05-08 2014-01-25 2014-01-25 2014-01-25 2014-01-25 2014-01-25 Last Shipments 2014-04-25 2014-04-25 2014-04-25 2014-04-25 2014-04-25 2014-04-25 2014-04-25 2014-04-25 2013-08-08 2014-04-25 2014-04-25 2014-04-25 2014-04-25 2014-04-25 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. Film capacitors – AC capacitors Motor run capacitors B32320/B32322 – MotorCap™ Test data AC test voltage terminal to terminal VTT 2 · VR, 2 s (routine test) 2 · VR, 60 s (type test) Insulation resistance Rins or time constant τ at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) 3000 s Dissipation factor tan δ at 20 °C ≤ 1.0 · 10-3 (120 Hz) Maximum rate of voltage rise dV/dtmax 10 V/μs Climatic data Climatic category 25/085/21 to IEC 60068-1 Lower category Tmin –25 °C Upper category Tmax +85 °C Damp heat test ttest 21 days Mechanical and thermal properties Ball pressure test to IEC 60309-1 sec. 27.3 20 N at 125 °C Plastic can and top disk material Compliant to EN 60252 UL 94 V2 compatible Glow wire test to IEC 60695-2-1/0 and –2-1/1 Test temp 550 °C for IR ≤ 0.5 A Test temp 750 °C for IR > 0.5 A Self-extinguishing within 30 seconds of withdrawing the glow wire and without igniting wrapping tissue. Tracking test to IEC 60112 solution A > 250 V Compatibility to RoHS Compliance to directive 2002/95/EC Approvals VDE 400 V/85 °C: 10000 h (class B) for 1.5 µF ... 50 µF Approved 480 V/85 °C: 3000 h (class C) for 3 µF ... 35 µF Approved FK PC PM AC Please read the important notes, cautions and warnings. January 2008 Page 3 of 8 Film capacitors – AC capacitors Motor run capacitors B32320/B32322 – MotorCap™ Dimensional drawings B32320 B32322 Mounting options # = 1: Can without mounting # = 3: Can with M8 bolt # = 5: Locking clip 10 10 Star Washer 8mm Nut M8x1.25 10 2.0±0.05 Ø8.2+0.2/-0 10.2+0.1/-0 Stud M8x1.25 M8-sized M-Clip fast fixation Ø2.2+0.1/-0 FK PC PM AC Please read the important notes, cautions and warnings. January 2008 Page 4 of 8 Film capacitors – AC capacitors Motor run capacitors B32320/B32322 – MotorCap™ Ordering codes and packing units Max. dimensions d × l (mm) Max. dimensions d × l (mm) B32320 B32322 1.5 25 × 58 30 × 62 B3232*C1155J0#0 112 2 25 × 58 30 × 62 B3232*C1205J0#0 112 3 25 × 58 30 × 62 B3232*C1305J0#0 112 4 25 × 58 30 × 62 B3232*C1405J0#0 112 5 25 × 58 30 × 62 B3232*C1505J0#0 112 6 25 × 58 30 × 62 B3232*C1605J0#0 112 7 25 × 58 30 × 62 B3232*C1705J0#0 112 7.5 25 × 58 30 × 62 B3232*C1755J0#0 112 8 25 × 58 30 × 62 B3232*C1805J0#0 112 9 30 × 62 30 × 62 B3232*C1905J0#0 112 10 30 × 62 30 × 62 B3232*C1106J0#0 112 12 30 × 62 30 × 62 B3232*C1126J0#0 112 14 30 × 62 30 × 62 B3232*C1146J0#0 112 15 30 × 62 30 × 62 B3232*C1156J0#0 112 16 35 × 62 35 × 62 B3232*C1166J0#0 84 18 35 × 62 35 × 62 B3232*C1186J0#0 84 20 35 × 62 35 × 62 B3232*C1206J0#0 84 22 35 × 62 35 × 62 B3232*C1226J0#0 84 25 35 × 71 35 × 71 B3232*C1256J0#0 84 30 35 × 71 35 × 71 B3232*C1306J0#0 84 35 40 × 71 40 × 71 B3232*C1356J0#0 60 40 40 × 71 40 × 71 B3232*C1406J0#0 45 45 40 × 71 40 × 71 B3232*C1456J0#0 45 50 40 × 95 40 × 95 B3232*C1506J0#0 45 55 40 × 95 40 × 95 B3232*C1556J0#0 45 60 40 × 95 40 × 95 B3232*C1606J0#0 45 VR CR V AC μF 250 FK PC PM AC Please read the important notes, cautions and warnings. Ordering code Packing units pcs. January 2008 Page 5 of 8 Film capacitors – AC capacitors Motor run capacitors B32320/B32322 – MotorCap™ Max. dimensions d × l (mm) Max. dimensions d × l (mm) B32320 B32322 1.5 25 × 58 30 × 62 B3232*B4155J0#0 112 2 25 × 58 30 × 62 B3232*B4205J0#0 112 3 25 × 58 30 × 62 B3232*B4305J0#0 112 4 25 × 58 30 × 62 B3232*B4405J0#0 112 5 30 × 62 30 × 62 B3232*B4505J0#0 112 6 30 × 62 30 × 62 B3232*B4605J0#0 112 7 35 × 62 35 × 62 B3232*B4705J0#0 84 8 35 × 62 35 × 62 B3232*B4805J0#0 84 9 35 × 62 35 × 62 B3232*B4905J0#0 84 10 35 × 62 35 × 62 B3232*B4106J0#0 84 12 35 × 71 35 × 71 B3232*B4126J0#0 84 14 35 × 71 35 × 71 B3232*B4146J0#0 84 15 40 × 71 40 × 71 B3232*B4156J0#0 60 16 40 × 71 40 × 71 B3232*B4166J0#0 60 18 40 × 71 40 × 71 B3232*B4186J0#0 60 20 40 × 71 40 × 71 B3232*B4206J0#0 60 22 40 × 95 40 × 95 B3232*B4226J0#0 60 25 40 × 95 40 × 95 B3232*B4256J0#0 60 30 40 × 95 40 × 95 B3232*B4306J0#0 60 35 45 × 95 45 × 95 B3232*B4356J0#0 45 40 45 × 95 45 × 95 B3232*B4406J0#0 45 45 50 × 95 50 × 95 B3232*B4456J0#0 32 50 50 × 95 50 × 95 B3232*B4506J0#0 32 55 50 × 95 50 × 95 B3232*B4556J0#0 32 60 50 × 95 50 × 95 B3232*B4606J0#0 32 VR CR V AC μF 400 FK PC PM AC Please read the important notes, cautions and warnings. Ordering code Packing units pcs. January 2008 Page 6 of 8 Film capacitors – AC capacitors Motor run capacitors VR V AC 480 B32320/B32322 – MotorCap™ Max. dimensions d × l (mm) Max. dimensions d × l (mm) B32320 B32322 3 30 × 62 30 × 62 B3232*B7305J0#0 112 4 30 × 62 30 × 62 B3232*B7405J0#0 112 5 30 × 62 30 × 62 B3232*B7505J0#0 112 6 35 × 62 35 × 62 B3232*B7605J0#0 84 7.5 35 × 71 35 × 71 B3232*B7755J0#0 84 8 35 × 71 35 × 71 B3232*B7805J0#0 84 10 40 × 71 40 × 71 B3232*B7106J0#0 60 12 40 × 71 40 × 71 B3232*B7126J0#0 60 15 45 × 71 45 × 71 B3232*B7156J0#0 45 16 45 × 71 45 × 71 B3232*B7166J0#0 45 20 45 × 71 45 × 71 B3232*B7206J0#0 45 22 45 × 71 45 × 71 B3232*B7226J0#0 45 25 45 × 95 45 × 95 B3232*B7256J0#0 45 30 45 × 95 45 × 95 B3232*B7306J0#0 45 35 50 × 95 50 × 95 B3232*B7356J0#0 32 40 45 × 120 45 × 120 B3232*B7406J0#0 45 CR μF Ordering code Packing units pcs. Composition of ordering code: *: Terminals 0 single fast-on terminals 2 double fast-on terminals #: Construction 1 plastic can 3 plastic can with M8 bolt 5 plastic can with locking clip, available for diameters 30 mm, 32 mm and 35 mm, others on request U Please read “Applications warning, installation and maintenance instructions” and the “General Safety Data Sheet for Power Capacitors” issued by ZVEI, which are available on the internet at www.epcos.com/ac_capacitors, to ensure optimum performance and to prevent products from failing, and in worst case, bursting and fire. Information given in the data sheet reflects typical specifications. You are kindly requested to approve our product specifications or request our approval for your specification before ordering. FK PC PM AC Please read the important notes, cautions and warnings. January 2008 Page 7 of 8 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. FK PC PM AC January 2008 Page 8 of 8