ANADIGICS ACA3748V0 870 mhz, 25 db gain catv power doubler amplifier Datasheet

ACA3748
870 MHz, 25 dB Gain
CATV Power Doubler Amplifier
PRELIMINARY DATA SHEET - Rev 1.0
FEATURES
•
25 dB Gain
•
40 MHz to 870 MHz Operating Range
•
0.2 dB Gain Flatness
•
24 V Supply
•
Supply Current: 430 mA (Typ.)
•
Very Low Distortion & Noise
•
Robust Design and Insensitive to Voltage
Transients
•
GaAs Monolithic IC-Based
•
Standard SOT-115J Package
•
Ruggedized design with integrated ring wave
protection
•
Superior ESD protection, > 7 kV
APPLICATIONS
•
Distribution Nodes and Line Extenders in CATV
Systems
PRODUCT DESCRIPTION
The ACA3748 is a GaAs Hybrid Amplifier for CATV
HFC distribution systems. It consists of two pairs of
parallel amplifiers that are optimized for exceptionally
low distortion and noise figure with input and output
transient voltage protection. The ACA3748 is offered
in a standard SOT-115J package.
Figure 2: Hybrid Pinout
Table 1: SOT-115J Pinning
1
2 3
5
7 8
9
Figure 1: Simplified Hybrid Internal Arrangement
11/2012
PIN
Description
1
RF Input
2
GND
3
GND or No Connection
5
24 V
7, 8
GND
9
RF Output
ACA3748
Table 2: Absolute Minimum and Maximum Ratings
Symbol
Min
Typ
Max
Unit
VDD
-
+24
+28
VDC
-
-
-
+70
Operating mounting Base temperature
TMB
-20
-
+100
C
Storage Temperature
TSTG
-40
+100
C
Supply Voltage
RF Power at inputs
Conditions
dBmV single tone
Table 3: Operating Ranges
Symbol
Min
Typ
Max
Unit
-
40
-
870
MHz
RF Frequency
Conditions
Table 4: Electrical Characteristics
(Test condition: 40 to 870 MHz, TMB = 308C, 75 V loading)
Symbol
Min
Typ
Max
Unit
Conditions
Power Gain
GP
24
25
26
dB
f = 870 MHz
Slope cable equivalent
SL
-
1.5
-
dB
47 - 870 MHz
Gain Flatness
FL
-
0.5
-
dB
47 - 870 MHz
(peak to valley)
Input Return Loss
S11
-
-
-20
-18
-16
dB
40 - 380 MHz
380 - 700 MHz
700 - 870 MHz
Output Return Loss
S22
-
-
-20
-18
-16
dB
40 - 380 MHz
380 - 700 MHz
700 - 870 MHz
CTB
-
-
-65
-65
-60
-
dBc
See Note 1
See Note 2
CSO
-
-
-65
-65
-60
-
dBc
See Note 1
See Note 2
Noise Figure
-
-
5.0
7.0
dB
Supply Current
-
-
430
450
mA
Notes:
(1) 79 flat NTSC analog channels @ +48 dBmV/CH output to 550 MHz, plus 53 flat analog channels @ +42 dBmV/CH
above 550 MHz.
(2) 79 flat channels at +53 dBmV per channel output.
2
PRELIMINARY DATA SHEET - Rev 1.0
11/2012
ACA3748
Figure 10: Hybrid Line Amp Physical Outline
ACA3748
LLLLL LL NNN
YYWW CC
(PIN SIDE)
Figure 11: Branding Specification
3
PRELIMINARY DATA SHEET - Rev 1.0
11/2012
ACA3748
ORDERING INFORMATION
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
COMPONENT
PACKAGING
ACA3748V0
-20 °C to +100 °C
SOT-115J
Hybrid Amplifier
100 Piece Box
ACA3748P9
-20 °C to +100 °C
SOT-115J
Hybrid Amplifier
Special Handling
ORDER NUMBER
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice.
The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to
change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed
to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers
to verify that the information they are using is current before placing orders.
warning
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product
in any such application without written consent is prohibited.
4
PRELIMINARY DATA SHEET - Rev 1.0
11/2012
Similar pages