NE5534, NE5534A, SA5534. SA5534A LOW-NOISE OPERATIONAL AMPLIFIERS SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004 D Equivalent Input Noise Voltage . . . D D D D D D D D D 3.5 nV//Hz Typ Unity-Gain Bandwidth . . . 10 MHz Typ Common-Mode Rejection Ratio . . . 100 dB Typ High DC Voltage Gain . . . 100 V/mV Typ Peak-to-Peak Output Voltage Swing 32 V Typ With VCC+ = +18 V and RL = 600 W High Slew Rate . . . 13 V/ms Typ Wide Supply-Voltage Range +3 V to +20 V Low Harmonic Distortion Offset Nulling Capability External Compensation Capability NE5534, SA5534 . . . D (SOIC), P (PDIP), OR PS (SOP) PACKAGE NE5534A, SA5534A . . . D (SOIC) OR P (PDIP) PACKAGE (TOP VIEW) BALANCE IN− IN+ VCC− 1 8 2 7 3 6 4 5 COMP/BAL VCC+ OUT COMP description/ordering information The NE5534, NE5534A, SA5534, and SA5534A are high-performance operational amplifiers combining excellent dc and ac characteristics. Some of the features include very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, and high slew rate. These operational amplifiers are compensated internally for a gain equal to or greater than three. Optimization of the frequency response for various applications can be obtained by use of an external compensation capacitor between COMP and COMP/BAL. The devices feature input-protection diodes, output short-circuit protection, and offset-voltage nulling capability with use of the BALANCE and COMP/BAL pins (see the application circuit diagram). For the NE5534A and SA5534A, a maximum limit is specified for the equivalent input noise voltage. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright © 2004, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 NE5534, NE5534A, SA5534. SA5534A LOW-NOISE OPERATIONAL AMPLIFIERS SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004 description/ordering information (continued) ORDERING INFORMATION VIOmax AT 25°C TA PDIP (P) 0°C to 70°C 4 mV SOIC (D) SOP (PS) PDIP (P) −40°C 40°C to 85°C 4 mV SOIC (D) SOP (PS) † ORDERABLE PART NUMBER PACKAGE† TOP-SIDE MARKING Tube of 50 NE5534P NE5534P Tube of 50 NE5534AP NE5534AP Tube of 75 NE5534D Reel of 2500 NE5534DR Tube of 75 NE5534AD Reel of 2500 NE5534ADR Reel of 2000 NE5534PSR N5534 Tube of 50 SA5534P SA5534P Tube of 50 SA5534AP SA5534AP Tube of 75 SA5534D Reel of 2500 SA5534DR Tube of 75 SA5534AD Reel of 2500 SA5534ADR Tube of 80 SA553APS Reel of 2000 SA553APSR NE5534 5534A SA5534 SA5534A SA5534 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. schematic BALANCE COMP/BAL 8 1 100 pF IN+ 12 kΩ COMP 5 7 12 kΩ 3 40 pF 15 Ω 6 IN− 2 12 pF 7 pF All component values shown are nominal. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 OUT 15 Ω 4 2 VCC+ VCC− NE5534, NE5534A, SA5534. SA5534A LOW-NOISE OPERATIONAL AMPLIFIERS SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004 symbol application circuit VCC+ 22 kΩ COMP 100 kΩ COMP/BAL IN− CC 1 − OUT IN+ 2 + 8 − 5 7 5534 6 BALANCE 3 + 4 VCC− Frequency Compensation and Offset-Voltage Nulling Circuit absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage: VCC+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V VCC− (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −22 V Input voltage either input (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC+ Input current (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA Duration of output short circuit (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Package thermal impedance, θJA (see Notes 5 and 6): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85°C/W PS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 95°C/W Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC−. 2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage. 3. Excessive current will flow if a differential input voltage in excess of approximately 0.6 V is applied between the inputs, unless some limiting resistance is used. 4. The output may be shorted to ground or to either power supply. Temperature and/or supply voltages must be limited to ensure the maximum dissipation rating is not exceeded. 5. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. 6. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions MIN MAX VCC+ Supply voltage 5 15 V VCC− Supply voltage −5 −15 V NE5534, NE5534A 0 70 TA Operating free-air free air temperature range SA5534, SA5534A −40 85 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 UNIT °C 3 NE5534, NE5534A, SA5534. SA5534A LOW-NOISE OPERATIONAL AMPLIFIERS SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004 electrical characteristics, VCC± = ±15 V, TA = 25°C (unless otherwise noted) TEST CONDITIONS† PARAMETER VIO Input offset voltage VO = 0, RS = 50 Ω IIO Input offset current VO = 0 IIB Input bias current VO = 0 VICR Common-mode input voltage range Large signal differential voltage amplification Large-signal VO = ±10 V, RL ≥ 600 Ω Avd Small signal differential voltage amplification Small-signal f = 10 kHz VO = ±10 V ri Input resistance 0.5 4 5 20 500 ±12 ±13 24 26 VCC± = ±18 V 30 32 TA = 25°C 25 100 TA = Full range 15 CC = 0 mV nA 1500 2000 VCC± = ±15 V UNIT 300 400 TA = Full range AVD Unity-gain bandwidth MAX TA = Full range TA = 25°C RL ≥ 600 Ω B1 TYP TA = Full range Maximum peak-to-peak peak to peak output voltage swing Maximum-output-swing bandwidth TA = 25°C TA = 25°C VO(PP) BOM MIN nA V V V/mV 6 CC = 22 pF 2.2 CC = 0 200 V/mV CC = 22 pF 95 VCC± = ±18 V, RL ≥ 600 Ω, VO = ±14 V, CC = 22 pF 70 CC = 22 pF, CL = 100 pF 10 MHz 100 kΩ RL ≥ 600 Ω, f = 10 kHz 0.3 Ω 30 kHz zo Output impedance AVD = 30 dB, CC = 22 pF, CMRR Common-mode rejection ratio VO = 0, RS = 50 Ω VIC = VICRmin, 70 100 dB kSVR Supply-voltage rejection ratio (ΔVCC/ΔVIO) VCC+ = ±9 V to ±15 V, VO = 0 RS = 50 Ω, 80 100 dB IOS Output short-circuit current ICC Supply current VO = 0, No load TA = 25°C † 4 38 4 mA 8 mA All characteristics are measured under open-loop conditions with zero common-mode input voltage, unless otherwise specified. For NE5534 and NE5534A, full range is 0°C to 70°C. For SA5534 and SA5534A, full range is −40°C to 85°C. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 NE5534, NE5534A, SA5534. SA5534A LOW-NOISE OPERATIONAL AMPLIFIERS SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004 operating characteristics, VCC ± = ±15 V, TA = 25°C PARAMETER TEST CONDITIONS NE5534, SA5534 TYP SR Slew rate Rise time Overshoot factor tr Rise time Overshoot factor Vn Equivalent input noise voltage In Equivalent input noise current F Average noise figure NE5534A, SA5534A MIN TYP UNIT MAX CC = 0 13 13 CC = 22 pF 6 6 20 20 ns 20 20 % 50 50 ns 35 35 % f = 30 Hz 7 5.5 7 f = 1 kHz 4 3.5 4.5 f = 30 Hz 2.5 1.5 f = 1 kHz 0.6 0.4 VI = 50 mV, RL = 600 Ω, Ω CL = 100 pF AVD = 1, CC = 22 pF VI = 50 mV, RL = 600 Ω, Ω CL = 500 pF AVD = 1, CC = 47 pF RS = 5 kΩ, f = 10 Hz to 20 kHz POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 0.9 V/ s V/μs nV/√Hz pA/√H pA/√Hz dB 5 NE5534, NE5534A, SA5534. SA5534A LOW-NOISE OPERATIONAL AMPLIFIERS SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004 NORMALIZED INPUT BIAS CURRENT AND INPUT OFFSET CURRENT vs FREE-AIR TEMPERATURE VO(PP) VOPP − Maximum Peak-to-Peak Output Voltage − V Normalized Input Bias Current and Input Offset Current TYPICAL CHARACTERISTICS† 1.6 VCC± = ±15 V 1.4 Offset 1.2 Bias 1 0.8 0.6 0.4 −75 −50 75 100 −25 0 25 50 TA − Free-Air Temperature − °C 125 ÁÁ ÁÁ ÁÁ MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY 30 CC = 0 25 20 15 10 CC = 22 pF 5 VCC± = ±15 V TA = 25°C 0 100 1k NORMALIZED SLEW RATE AND UNITY-GAIN BANDWIDTH vs SUPPLY VOLTAGE 103 CC = 0 pF 102 CC = 22 pF 1k 10 k 100 k 1 M f − Frequency − Hz 10 M 100 M Normalized Slew Rate and Unity-Gain Bandwidth AVD − Differential Voltage Amplification − V/mV 104 100 TA = 25°C 1.1 Unity-Gain Bandwidth 1 0.9 0.8 0.7 Slew Rate 0.6 0.5 0.4 0 Figure 3 † 6 1M 1.2 VCC± = ±15 V TA = 25°C 105 1 10 100 k Figure 2 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY 10 10 k f − Frequency − Hz Figure 1 106 CC = 47 pF 15 5 10 | VCC± | − Supply Voltage − V Figure 4 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 20 NE5534, NE5534A, SA5534. SA5534A LOW-NOISE OPERATIONAL AMPLIFIERS SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004 TYPICAL CHARACTERISTICS† NORMALIZED SLEW RATE AND UNITY-GAIN BANDWIDTH vs FREE-AIR TEMPERATURE TOTAL HARMONIC DISTORTION vs FREQUENCY 0.01 VCC± = ±15 V 1.1 THD − Total Harmonic Distortion − % Normalized Slew Rate and Unity-Gain Bandwidth 1.2 Slew Rate Unity-Gain Bandwidth 1 0.9 0.8 −75 −50 75 100 −25 0 25 50 TA − Free-Air Temperature − °C 0.007 VCC± = ±15 V AVD = 1 VI(rms) = 2 V TA = 25°C 0.004 0.002 0.001 100 125 400 I n − Equivalent Input Noise Current − pA/ Hz Vn − Equivalent Input Noise Voltage − nV/ Hz 10 VCC± = ±15 V TA = 25°C SA5534, NE5534 SA5534A, NE5534A 2 100 1k 10 k 100 k VCC± = ±15 V TA = 25°C 7 4 2 1 SA5534, NE5534 0.7 0.4 SA5534A, NE5534A 0.2 0.1 10 f − Frequency − Hz 100 1k 10 k 100 k f − Frequency − Hz Figure 8 Figure 7 † 40 k 100 k EQUIVALENT INPUT NOISE CURRENT vs FREQUENCY 4 1 10 10 k Figure 6 EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 7 4k f − Frequency − Hz Figure 5 10 1k Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 NE5534, NE5534A, SA5534. SA5534A LOW-NOISE OPERATIONAL AMPLIFIERS SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004 TYPICAL CHARACTERISTICS TOTAL EQUIVALENT INPUT NOISE VOLTAGE vs SOURCE RESISTANCE Total Equivalent Input Noise Voltage − μV 100 70 40 VCC± = ±15 V TA = 25°C 20 10 7 4 f = 10 Hz to 20 kHz 2 1 0.7 0.4 f = 200 Hz to 4 kHz 0.2 0.1 100 1k 10 k 100 k RS − Source Resistance − Ω Figure 9 8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1M PACKAGE OPTION ADDENDUM www.ti.com 7-Jun-2010 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) NE5534AD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples NE5534ADE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples NE5534ADG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples NE5534ADR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Contact TI Distributor or Sales Office NE5534ADRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Contact TI Distributor or Sales Office NE5534ADRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Contact TI Distributor or Sales Office NE5534AJG OBSOLETE CDIP JG 8 NE5534AP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Contact TI Distributor or Sales Office NE5534APE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Contact TI Distributor or Sales Office NE5534D ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Contact TI Distributor or Sales Office NE5534DE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Contact TI Distributor or Sales Office NE5534DG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Contact TI Distributor or Sales Office NE5534DR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples NE5534DRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples NE5534DRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples NE5534IP OBSOLETE PDIP P 8 NE5534P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Contact TI Distributor or Sales Office NE5534PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Contact TI Distributor or Sales Office TBD TBD Addendum-Page 1 Call TI Call TI Call TI Call TI Samples Not Available Samples Not Available PACKAGE OPTION ADDENDUM www.ti.com 7-Jun-2010 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) NE5534PSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples NE5534PSRE4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples NE5534PSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples SA5534AD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples SA5534ADE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples SA5534ADG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples SA5534ADR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Contact TI Distributor or Sales Office SA5534ADRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Contact TI Distributor or Sales Office SA5534ADRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Contact TI Distributor or Sales Office SA5534AP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Contact TI Distributor or Sales Office SA5534APE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Contact TI Distributor or Sales Office SA5534D ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples SA5534DE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples SA5534DG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples SA5534DR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Contact TI Distributor or Sales Office SA5534DRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Contact TI Distributor or Sales Office SA5534DRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Contact TI Distributor or Sales Office SA5534P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Contact TI Distributor or Sales Office Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com 7-Jun-2010 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp CU NIPDAU N / A for Pkg Type (3) Samples (Requires Login) SA5534PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) Contact TI Distributor or Sales Office SA5534PS ACTIVE SO PS 8 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples SA5534PSE4 ACTIVE SO PS 8 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples SA5534PSG4 ACTIVE SO PS 8 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples SA5534PSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office SA5534PSRE4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office SA5534PSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com 7-Jun-2010 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 29-Jul-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant NE5534ADR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 NE5534DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SA5534ADR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SA5534DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SA5534PSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 29-Jul-2011 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) NE5534ADR SOIC D 8 2500 340.5 338.1 20.6 NE5534DR SOIC D 8 2500 340.5 338.1 20.6 SA5534ADR SOIC D 8 2500 340.5 338.1 20.6 SA5534DR SOIC D 8 2500 340.5 338.1 20.6 SA5534PSR SO PS 8 2000 346.0 346.0 33.0 Pack Materials-Page 2 MECHANICAL DATA MCER001A – JANUARY 1995 – REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0°–15° 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee® Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2011, Texas Instruments Incorporated