2006 POWER INDUCTORS High Reliability Power Inductors ML322PZA ■ High temperature materials allow operation in ambient temperatures up to 155°C ■ Lowest profile, ultra-miniature, shielded power inductor ■ Soft saturation makes them ideal for VRM/VRD applications. ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. Terminations Tin-silver over copper Core material Composite Weight 12 – 13 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 2000/7″reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.28 mm thick, 4 mm pocket spacing, 0.76 mm pocket depth Part number1 ML322PZA102MLZ ML322PZA222MLZ ML322PZA332MLZ ML322PZA472MLZ ML322PZA562MLZ ML322PZA682MLZ ML322PZA822MLZ ML322PZA103MLZ ML322PZA153MLZ ML322PZA223MLZ ML322PZA333MLZ ML322PZA473MLZ ML322PZA563MLZ ML322PZA683MLZ ML322PZA823MLZ ML322PZA104MLZ DCR (Ohms) Inductance2 ±20% (µH) typ max 1.0 0.153 0.169 2.2 0.278 0.306 3.3 0.460 0.506 4.7 0.665 0.732 5.6 0.75 0.825 6.8 0.92 1.02 8.2 1.08 1.19 10.0 1.27 1.40 15.0 2.02 2.22 22.0 2.78 3.06 33.0 4.45 4.90 47.0 5.60 6.16 56.0 6.65 7.32 68.0 8.50 9.35 82.0 9.25 10.18 100.0 11.10 12.25 3 SRF (MHz)4 min typ 136 170 88 110 70 88 54 68 49 61 45 57 41 51 36 45 29.6 37 24.4 30.5 19.2 24.0 15.6 19.5 13.2 16.5 12.8 16.0 10.8 13.5 10.4 13.0 Isat (A)5 Irms (A)6 10% drop 20% drop 30% drop 20°C rise 40°C rise 0.71 1.0 1.2 0.910 1.22 0.49 0.69 0.78 0.710 0.950 0.42 0.56 0.66 0.550 0.720 0.31 0.44 0.52 0.500 0.660 0.30 0.43 0.50 0.460 0.600 0.26 0.35 0.41 0.400 0.520 0.24 0.33 0.39 0.370 0.490 0.24 0.31 0.37 0.345 0.440 0.19 0.25 0.29 0.265 0.350 0.150 0.205 0.240 0.235 0.305 0.110 0.150 0.180 0.160 0.205 0.090 0.130 0.155 0.155 0.205 0.085 0.120 0.145 0.145 0.195 0.080 0.115 0.135 0.115 0.155 0.065 0.090 0.115 0.125 0.165 0.065 0.090 0.115 0.100 0.135 1. When ordering, please specify testing code: ML322PZA222MLZ Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 C = Custom screening (please specify when ordering) 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. Typical dc current at which the inductance drops the specified amount from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Testing: ® Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2012 Document ML763-1 Phone 800-981-0363 Fax 847-639-1508 Revised 01/07/11 E-mail [email protected] Web www.coilcraft-cps.com 2006 POWER INDUCTORS ML322PZA Series Typical L vs Current 100 Typical L vs Frequency 100 82 µH 82 µH 33 µH 10 Inductance (µH) Inductance (µH) 33 µH 10 µH 3.3 µH 1 1 µH 0.1 10 µH 10 3.3 µH 1 µH 1 0.1 0.01 10 1 0.1 0.1 10 1 Current (A) 100 Frequency (MHz) Irms Derating 0.079 ±0.008 2,0 ±0,2 120 110 90 0.075 ±0.008 1,9 ±0,2 80 70 0.024 max 0,60 60 50 0.057 1,45 0.030 max 0,75 40 30 20 0.069 max 1,75 10 0 -55 -40 Suggested Land Pattern Recommended Land Pattern 25°C Percent of rated Irms 100 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) 0.014 min 0,35 Dimensions are in ® 0.041 1,04 inches mm Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2012 0.087 2,2 Document ML763-2 Phone 800-981-0363 Fax 847-639-1508 Revised 01/07/11 E-mail [email protected] Web www.coilcraft-cps.com