MAC Series 14 Pin DIP Oscillator Industry Standard Package RoHS Compliant Available 32.768KHz CMOS Output Frequency Range 32.768KHZ Frequency Stability (Inclusive of Temperature, Load, Voltage and Aging) See Part Number Guide Operating Temperature See Part Number Guide Storage Temperature -55°C to +125°C Supply Voltage 5.0VDC ±10% Supply Current 10mA max Waveform CMOS Logic “0” 10% Vdd max Logic “1” 90% Vdd min Duty Cycle See Part Number Guide Load 10K Ohms // 15pF Rise / Fall Time 10% to 90% of waveform 10nSec max Voh = 70% of Vdd min or No Connection to Enable Output Vol = 30% of Vdd max or grounded to Disable Output (High Imped- Tri-State Operation ance) Environmental & Mechanical Detail Shock Solderability MIL-STD-883, Method 2002 Cond B MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ Line 2 = SYYWWL S = Vibration MIL-STD-883, Method 2007, Cond A YYWW Gross Leak Test MIL-STD-883, Method 1014, Cond C L Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 = = Internal Code 4 Numerical Digit Date Code (Year / Week) Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Pin 1 Designator MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] In the event of conflict, the requirements of this specification shall govern. Revisions only with customer approval Revision: 11/18/10 E Pg 1 of 2 Part Number Guide 5 MAC 32.768KHZ Symmetry Blank = 40/60% A = 45/55% 14 pin DIP RoHS Compliant Blank = Not Compliant F = Is RoHS Compliant Frequency Stability 050 = ±50 ppm 100 = ±100 ppm Supply Voltage 5 = +5.0 VDC Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Value Added Options Blank = No Added Options G1 = Gull-Wing (option 1) G = Gull-Wing (option 2) CLXXX = Cut Leads XXX = Lead Length Code Pin 1 Connection Blank = No Connect H = Tri-state PLEASE CONSULT WITH MMD SALES DEPARTMENT FOR ANY OTHER PARAMETERS OR OPTIONS Mechanical Details 20.70 [.815] MAX 5.08 [.200] MXXXXX SYYWWL XXXXX 5.08 [.200] MIN .50 [.020] 15.24 [.600] 13.10 [.516] MAX 1 7 7.62 [.300] 14 8 PIN CONNECTIONS PIN 1 N/C OR TRI-STATE PIN 7 CASE GROUND PIN 8 OUTPUT PIN 14 SUPPLY VOLTAGE DIMENSIONS IN BRACKET ARE IN INCHES EXTERNAL BYPASS CAPACITOR RECOMMENDED MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] In the event of conflict, the requirements of this specification shall govern. Revisions only with customer approval Revision: 11/18/10 E Pg 2 of 2