SPECIFICATION SHEET DUAL BAND ANTENNAS A breakthrough in dual-band antenna technology, the CELNSAT antenna combines a wide-band ISM or Cellband antenna with a high-efficiency, amplified GPS antenna. Housed in a weather-tight, tamper-resistant dome, the CELNSAT is ideal for mounting on devices such as vehicles, vending machines, or equipment housings. PHYSICAL DIMENSIONS 1.05" 0.95" 4.0" Adhesive 3/4 - 10 1.19" Cable Length 16.4' Cable Length 16.4' 0.575" • Unique dual-band configuration. 2.75" • High-efficiency amplified GPS antenna. 0.42" • High-performance broadband Cell or ISM element. • Low-profile weatherproof housing. • Both elements matched to 50Ω. • Center-fed through rugged mounting stud. SMA Connector • Ideal for mobile or stationary applications. BNC or RP-SMA Connector • Color and terminations customizable for volume OEMs. ELECTRICAL SPECIFICATIONS SPECIFICATION Frequency Gain V.S.W.R. Impedance Polarization Pattern GPS LNA: Gain: Noise Figure: Voltage: Current: GPS 859MHZ 915MHZ 1575.42MHz 5dBi <2.0 50Ω RHCP Hemispherical 824-894 2dBi <1.7 50Ω Vertical Omnidirectional 902-928 2dBi <1.7 50Ω Vertical Omnidirectional 32± 2dB 2.0dB (max) 5VDC (±10%) 20mA (max) MECHANICAL SPECIFICATIONS SPECIFICATION GPS Connector Cable Case Color Mounting Weight (Max) SMA (Male) 859MHz (CELL) ORDERING INFORMATION 916MHz (ISM) BNC RP-SMA (Female) 1.5D-2V 16.4 ft. ± 2 in. ABS White Threaded stud (20mm hole) 2.6 lb. (with cable assy.) PART # ANT-916-DBD-DA/W ANT-859-DBD-DA/W DESCRIPTION Dual Band Antenna (ISM) Dual Band Antenna (CELL) Revised 6/25/01 For additional information, please contact Antenna Factor at 800-489-1634 Recipient understands any or all of the above specifications are subject to change without notice and proceeds with integration at own risk.