FR2A DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS FR2K TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE RANGE - 50 to 800 Volts CURRENT - 4.0 Amperes FEATURES * ldeal for surface mounted applications * Low leakage current * Glass passivated junction SMB ( DO-214AA ) .083(2.11) .075(1.91) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant *Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 * Polarity: As marked * Mounting position: Any * Weight: 0.093 gram .185(4.70) .160(4.06) .060(1.52) .030(0.76) .220(5.59) .200(5.08) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL FR2A FR2B FR2D FR2G FR2J FR2K UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 Volts VDC 50 100 200 400 600 600 Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 75 oC IO Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 2.0A DC Maximum DC Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 100 o C Maximum Reverse Recovery Time (Note 3) Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range Volts 2.0 Amps I FSM 60 Amps VF 1.3 Volts 5.0 IR uAmps 150 trr 150 RθJL 250 20 CJ 30 T J, T STG -65 to + 175 500 nSec 0 C/ W pF 0 C NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 2. Thermal Resistance (Junction to Ambient), 0.2x0.2in2 (5X5mm2 ) copper pads to each terminal. 3. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A. 336 EXIT EXI BACK NEXT BACK EXIT NEXT BACK NEXT RATING AND CHARACTERISTIC CURVES ( FR2A THRU FR2K ) DC COMPONENTS CO., LTD. R 337 EXIT EXI BACK NEXT BACK EXIT NEXT BACK NEXT